VCPN610 VMware Certified Professional Network Virtual Test Set 4

How does NSX simplify the underlying physical network?


Options are :

  • All configuration and state information is stored in the local NSX BPDU database, eliminating the need for Spanning Tree Protocol (STP) on the physical network.
  • All configuration and state information are readily accessible, as is the mapping between virtual network topologies and the physical network.
  • All configuration and state information is cached by the NSX controllers, reducing the number of MAC/ARP table entries on the physical network.
  • All configuration and state information is available via the REST APIs to automate the configuration of the physical network.

Answer : All configuration and state information are readily accessible, as is the mapping between virtual network topologies and the physical network.

VCPVCD510 VMware Certified Professional 5 IAAS Practice Exam Set 4

Which two vSphere components are required for NSX? (Choose two.)A. Standard vSwitchB. Network I/O ControlC. Distributed Port GroupD. VMkernel port


Options are :

  • B,D
  • C,B
  • C,D
  • C,A

Answer : C,D

What are two valid methods of configuring virtual machines to use a vSphere Distributed Switch(vDS) that are currently using a vSphere Standard Switch (vSS)? (Choose two.)A. Select each virtual machine and drag it to the vSphere Distributed Switch.B. Select the vSS in use by the virtual machines and select the Move to option on the right-clickmenu.C. Select each virtual machine and edit the virtual network adapter's connection settings.D. Use the Migrate Virtual Machine Networking option from the right-click menu of the vDS.


Options are :

  • C,D
  • C,A
  • C,B
  • A,D

Answer : C,D

You have deployed a two-tiered application using four virtual machines:Two virtual machines are web application serversTwo virtual machines providing a clustered database serviceWhat feature can you configure to provide the most accurate account for only the traffic betweenthe web servers and the clustered database?


Options are :

  • On the vSphere Distributed Switch, configure the use of a port mirroring session using the Remote Mirroring Destination session type.
  • On the vSphere Distributed Switch, configure Netflow for the distributed virtual port group and enable Process internal flows only for the distributed switch.
  • On the vSphere Distributed Switch, configure the use of an Isolated Private VLAN for the ports of the four virtual machines.
  • On the vSphere Distributed Switch, configure the use of a port mirroring session using the Encapsulated Remote Mirroring (L3) Source session type.

Answer : On the vSphere Distributed Switch, configure Netflow for the distributed virtual port group and enable Process internal flows only for the distributed switch.

VCPC550 VMware Certified Professional Cloud Practice Test Set 3

What is one way that NSX improves network performance?


Options are :

  • Virtual machines in different subnets residing on the same host route traffic through an NSX switch, keeping traffic on the host.
  • Virtual machines in different subnets residing on the same host route traffic through an NSX Edge gateway, keeping traffic on the host.
  • Virtual machines in different subnets residing on the same host route traffic through an NSX logical router, keeping traffic on the host.
  • Virtual machines in different subnets residing on the same host route traffic through an NSX controller, keeping traffic on the host.

Answer : Virtual machines in different subnets residing on the same host route traffic through an NSX logical router, keeping traffic on the host.

Which NSX service or feature provides optimized management of virtual machine broadcast(ARP) traffic?


Options are :

  • Edge Services Gateway
  • NSX Controller
  • VTEP
  • NSX Manager

Answer : NSX Controller

You are tasked with designing a data center architecture that should maximize the use of vMotionwithin your environment. You must use these VMware best practices:The network must utilize widely offered layer 2 switching and layer 3 switching servicesPurchase of new equipment should be minimizedWhich two network design architectures will provide the requirements for vMotion in your datacenter? (Choose two.)A. Utilize layer 3 switching from the access layer through the core.B. Employ layer 2 multipathing using a standardized protocol.C. Deploy a flat, traditional layer 2 switched network.D. Deploy an overlay technology for the deployment of your virtual network.


Options are :

  • None of the Above
  • B,D
  • A,C
  • A,D
  • A,B

Answer : A,D

VCP-510 VMware Certified Professional on vSphere 5 Exam Set 3

An administrator wishes to upgrade to NSX from the following infrastructure:vCenter Server 4.1vShield 5.0ESXi hosts 4.1What is a valid, minimum set of steps to properly upgrade this environment to NSX?


Options are :

  • 1. Upgrade vCenter Server 4.1 to vCenter Server 5.5 2. Upgrade vShield 5.0 to vShield 5.5 3. Install the NSX upgrade bundle
  • 1. Upgrade vCenter Server 4.1 to vCenter Server 5.5 2. Upgrade ESXi hosts to ESXi 5.1 or greater 3. Install the NSX upgrade bundle
  • 1. Upgrade vCenter Server 4.1 to vCenter Server 5.5 2. Upgrade vShield 5.0 to vShield 5.5 3. Upgrade ESXi hosts to ESXi 5.1 or greater 4. Install the NSX upgrade bundle
  • 1. Upgrade vCenter Server 4.1 to vCenter Server 5.1 2. Upgrade vCenter Server 5.1 to vCenter Server 5.5 3. Upgrade ESXi hosts to ESXi 5.1 or greater 4. Install the NSX upgrade bundle

Answer : 1. Upgrade vCenter Server 4.1 to vCenter Server 5.5 2. Upgrade vShield 5.0 to vShield 5.5 3. Upgrade ESXi hosts to ESXi 5.1 or greater 4. Install the NSX upgrade bundle

What are two advantages for using NSX for vSphere's Logical Switching? (Choose two.)A. Expands the number of available VLANs.B. Allows for Layer 2 switching over Layer 3 infrastructure.C. Distributes Layer 3 data across multiple hypervisors.D. Provides for 10,000 logical segments.


Options are :

  • C,D
  • B,A
  • B,C
  • B,D

Answer : B,D

In a data center using a leaf and spine architecture, which two statements define the connectivitybetween the leaf and spine tiers required to provide optimal network connectivity for NSX?(Choose two.)A. Links are required between leaf and spine switches, and from each spine switch to other spineswitches in the architecture.B. Links are required between leaf and spine switches in the architecture to form a point-to-pointconnection between the two tiers.C. High availalability and scalability should be achieved using NSX High Availability.D. High availability and scalability should be achieved using Equal Cost Multipathing (ECMP).


Options are :

  • B,A
  • B,D
  • B,C
  • A,D

Answer : B,D

VMware VDCD510 Advanced Professional Data Center Design Exam Set 3

Which three network policy settings can only be configured on a vSphere 5.5 Distributed Switch?(Choose three.)A. Access Control Lists (ACLs)B. Network I/O ControlC. LACP v2D. NetFlowE. DSCP Marking


Options are :

  • A,D,E
  • A,C,B
  • A,C,E
  • B,C,E

Answer : A,C,E

How does NSX simplify physical network design?


Options are :

  • Transport zones are created in the virtual network for virtual machine traffic, removing the need to make changes to the physical network.
  • Virtual network integration can make changes to the physical network programmatically using REST API calls which automates network changes and increases agility.
  • VLANs are moved into the virtual network for virtual machine traffic, eliminating the need to use PVLANs on the physical network.
  • Network administrators only need to configure routing on the physical network for virtual machine traffic since all other network functions are moved to the virtual network.

Answer : Transport zones are created in the virtual network for virtual machine traffic, removing the need to make changes to the physical network.

Which VMware NSX for vSphere component can be created on-demand using vCloud AutomationCenter?


Options are :

  • The NSX Edge Services Gateway
  • The logical distributed router
  • The distributed firewall
  • The logical switch

Answer : The logical switch

VCAD510 VMware Certified Associate Data Center Virtual Test Set 3

Which two statements are true regarding NSX? (Choose two.)A. Workloads can be placed and moved independently of physical topology.B. Operational efficiency can be achieved through automation of the physical network.C. Workload deployments are non-disruptive over the existing physical network.D. NSX implementation requires a VMware vSphere environment.


Options are :

  • D,C
  • A,C
  • A,B
  • A,D

Answer : A,C

An administrator has recently deployed NSX, but is still using a pair of physical network securitydevices. The administrator wants to use the physical security devices to filter virtual machine traffichosted in the overlay network.Which NSX component will provide the connectivity between the overlay and the physicalnetwork?


Options are :

  • NSX Controller
  • Logical Router
  • Distributed Firewall
  • Edge Services Gateway

Answer : Logical Router

Which two characteristics of the underlying physical network does VMware NSX require for robustIP transport? (Choose two.)A. The physical network should provide scalable network I/O using Layer 2 Multipathing (L2MP)and Multichassis Link Aggregation (MLAG).B. The physical network should provide scalable network I/O using Equal Cost Multipathing(ECMP).C. QoS is not necessary since classification and marking will be done in the overlay.D. QoS classification and marking is required to provide end-to-end flow control.


Options are :

  • B,A
  • B,C
  • B,D
  • A,D

Answer : B,D

2V0-631 VMware Certified Professional 6 Cloud Management Set 1

On a vSS, how does teaming two or more physical network adapters provide load balancing whenusing the Load Balancing feature Route based on the originating virtual port ID?


Options are :

  • The physical network adapter is chosen by using the source IP address of the virtual machine and the destination IP address as variables in an algorithm.
  • The physical network adapter is chosen by using the source MAC address as a variable in an algorithm.
  • The physical network adapter is chosen based on the workloads from each port and the number of physical adapters.
  • They physical network adapter is chosen by use of a round robin based algorithm for each additional virtual port in the port group that becomes active.

Answer : They physical network adapter is chosen by use of a round robin based algorithm for each additional virtual port in the port group that becomes active.

Using VMware's best practices, choose two statements that define the best solution for scalinglayer 2 services for the virtual network. (Choose two.)A. Employ a layer 2 switched network.B. Employ a layer 3 switched network.C. Use GRE for an overlay network.D. Use VXLAN for an overlay network


Options are :

  • B,D
  • C ,D
  • None of the Above
  • B, C
  • B,A

Answer : B,D

Which component provides for installation of NSX hypervisor kernel components and user worldagents?


Options are :

  • NSX Edge Virtual Appliance
  • vCloud Automation Center
  • NSX Manager
  • NSX Controller

Answer : NSX Manager

VCP-510 VMware Certified Professional on vSphere 5 Exam Set 9

Which statement describes the traffic throughput of the NSX Distributed Firewall?


Options are :

  • Firewall services are distributed as a software firewall appliance and may be deployed on more than one ESXi host for scalability and high availability.
  • By deploying firewall software on a per virtual machine basis, firewall services will be distributed across multiple compute nodes.
  • Firewall services are implemented as kernel modules and provide traffic filtering between the virtual machine's vNIC and the vSwitch.
  • By decoupling the firewall services from the virtualization layer, traffic is directed to the distribution layer for firewall processing within a service module.

Answer : Firewall services are implemented as kernel modules and provide traffic filtering between the virtual machine's vNIC and the vSwitch.

What are three switch features found only on vSphere Distributed Switches? (Choose three.)A. Network I/O ControlB. CDPC. LLDPD. SR-IOVE. Port Mirroring


Options are :

  • A,C,E
  • A,C,B
  • A,D,E
  • B,C,E

Answer : A,C,E

Which two are valid statements regarding third-party services and NSX? (Choose two.)A. Third party services are automatically registered with NSX Manager.B. Third party services can either be automatically or manually registered with NSX Manager.C. Third party services require the deployment of a virtual appliance.D. Third party services may or may not utilize a service virtual appliance.


Options are :

  • C,D
  • B,A
  • B,D
  • B,C

Answer : B,D

VCP550D VMware Certified Professional 5 Data Center Exam Set 7

If unicast mode is configured for the overlay transport in an NSX deployment, which twostatements correctly define the network support that is required? (Choose two.)A. Configure NSX High AvailabilityB. Layer 2 switching support in theaccess and distribution layersC. Layer 3 switching support in theaccess and distribution layersD. Configure Jumbo Frame support


Options are :

  • C,B
  • C,A
  • C,D
  • A,D

Answer : C,D

Which two statements describe the network connectivity provided by a vSphere Standard Switch(vSS)? (Choose two.)A. A vSS provides a direct and logical connection between a virtual machine NIC and a physicalNIC.B. A vSS provides a direct and logical connection between two vSphere Distributed Switches.C. A vSS connects the vNIC of a virtual machine to the physical network based on the bandwidthof the VM's configured network adapter.D. A vSS connects the vNIC of a virtual machine to the physical network and is not restricted to aspecific bandwidth allocation based on the VM's configured network adapter.


Options are :

  • C,D
  • A,D
  • A,B
  • A,C

Answer : C,D

Layer 2 Multipathing (L2MP) and Multi-chassis Etherchannel (MEC) features have distinct scalingdifferences with the network switching and routing services provided by NSX.Which two statements provide a proper contrast of these services? (Choose two.)A. Multi-chassis Etherchannel features provide higher utilization of Ethernet links within a definedL2/L3 distribution area.B. Multi-Chassis Etherchannel features provide an easy ability to scale a VLAN across the datacenter.C. NSX provides a method to transparently deploy L2MP protocols upon existing data centerinstallations without service disruption.D. NSX provides a method to deploy scalable L2/L3 services on existing data center installations.


Options are :

  • A,C
  • A,D
  • A,B
  • B,D

Answer : A,D

VCP-510 VMware Certified Professional on vSphere 5 Exam Set 2

A network security administrator wants to monitor traffic on several VLANs configured on avSphere Distributed Switch. The traffic will be sent to another distributed port.What type of port mirroring session must be configured to meet these requirements?


Options are :

  • Select the session type Remote Mirroring Destination when configuring the Port Mirroring session.
  • Select the session type Distributed Port Mirroring when configuring the Port Mirroring session.
  • Select the session type Remote Mirroring Source when configuring the Port Mirroring session.
  • Select the session type Distributed Port Mirroring (legacy) when configuring the Port Mirroring session.

Answer : Select the session type Remote Mirroring Destination when configuring the Port Mirroring session.

Which two statements describe the benefits provided by firewall services deployed by NSX?(Choose two.)A. Firewall services deployed using a software appliance will provide east-west traffic filtering andsecurity.B. Firewall services deployed using a distributed kernel module will provide east-west trafficfiltering and security.C. Firewall services providing edge security services uses a virtual appliance and is centrallymanaged.D. Firewall services providing edge security services uses a distributed kernel module.


Options are :

  • B,C
  • B,D
  • B,A
  • D,C

Answer : B,C

What is the minimum MTU size recommended by VMware for the physical network whendeploying NSX for vSphere?


Options are :

  • 1600
  • 2148
  • 1550
  • 9000

Answer : 1600

VCPVCD510 VMware Certified Professional 5 IaaS Exam Set 1

Which two statements are valid regarding vCloud Networking and Security (vCNS) and NSX?(Choose two.)A. Both vCNS and NSX support multiple hypervisor environments.B. NSX provides support for multiple hypervisor environments, vCNS does not.C. Both vCNS and NSX support dynamic routing protocols.D. NSX supports dynamic routing protocols, vCNS does not.


Options are :

  • C,D
  • B,C
  • B,D
  • B,A

Answer : B,D

Which statement is true regarding deploying NSX over a physical network?


Options are :

  • VLANs are not required to separate traffic between virtual machines.
  • Routing is supported on bridged interfaces.
  • OSPF can be used for Management traffic in a Layer 3 fabric design.
  • NSX can implement IPv6 on an IPv4 physical network.

Answer : NSX can implement IPv6 on an IPv4 physical network.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions

Subscribe to See Videos

Subscribe to my Youtube channel for new videos : Subscribe Now