VCPC550 VMware Certified Professional Cloud Practice Test Set 6

During a physical network reconfiguration, an ESXi host briefly lost connection to the managementnetwork. High Availability (HA) began powering off the virtual machines residing on the affectedhost to be restarted on an unaffected host in the cluster.Which setting should the administrator configure to prevent this type of HA failover during plannedmaintenance?




Options are :

  • Host isolation response
  • VM monitoring
  • Admission control
  • Host monitoring

Answer : Host monitoring

VCPC510 VMware Certified Professional on VCloud Exam Set 7

A vSphere administrator needs a way of sending noncritical ESXi events to a remote server. Dueto budget constraints, no additional costs should be incurred.Which tool will best meet this requirement?
Options are :
  • . vSphere Syslog Collector
  • vSphere Management Appliance
  • vSphere ESXi Dump Collector
  • vSphere vCenter Log Insight

Answer : . vSphere Syslog Collector

An administrator powers on a vCloud Automation Center Multi-Machine Service that includesmachine A and machine B. The application on machine A does NOT start correctly and displaysthe following error message:Machine B not readyWhat step should be taken to resolve this issue?
Options are :
  • Define a startup delay in the Multi-Machine Service.
  • Change the startup order of the Multi-Machine Service.
  • Adjust the startup approvals for the Multi-Machine Service.
  • Create a startup dependency in the Multi-Machine Service.

Answer : Change the startup order of the Multi-Machine Service.

An administrator is deploying vSphere using a NAS device as the shared storage system. Theadministrator has already created a VMkernel port, enabled the NFS client, and configured amount point accessible to the hosts.Which additional configuration is required before the datastore can be used to create virtualmachines?
Options are :
  • The ESXi hosts must have root access to the datastore.
  • The NAS must support NFS version 4.
  • Port binding must be configured on the VMkernel port.
  • The MTU on the VMkernel port must be set to 9000.

Answer : The ESXi hosts must have root access to the datastore.

VCA410-DT VMware Certified Associate Desktop Practice Exam Set 5

An administrator is unable to login to vCenter Server when using the vSphere Web Client. Theadministrator successfully accessed vCenter Server using the client earlier the same day.What is the most appropriate first step the administrator should take to resolve this issue?
Options are :
  • Verify the vCenter Single Sign-On service is running on the vCenter Server
  • Verify the vSphere Web Server service is running on the vCenter Server
  • Verify the web browser being used has Adobe Flash plugin version 11.5 or later
  • Verify the administrator has permissions configured in vCenter Server

Answer : Verify the vCenter Single Sign-On service is running on the vCenter Server

An administrator determines that when a host residing in a High Availability (HA) cluster fails, thevirtual machines fail to restart on a remaining host, or will only restart after a long delay.Which two conditions would account for this behavior? (Choose two.)

A. The virtual machines were not protected by vSphere HA at the time the failure occurred.

B. Distributed Resource Scheduler was not enabled at the time the failure occurred.

C. There is insufficient spare capacity on hosts with which the virtual machines are compatible.

D. The virtual machines contain physical Raw Device Mappings.



Options are :

  • A,D
  • A,B
  • A,C
  • C,D

Answer : A,C

An administrator finds that there is insufficent information in the vCloud Director task log totroubleshoot task related events.What should the administrator do to increase the level of information provided?
Options are :
  • Set the Default syslog server settings for networks property in the general system settings for vCloud Director to Verbose.
  • Set the Display debug information property in the general system settings for vCloud Director to Enable.
  • Set the log4j.rootLogger property in the /opt/vmware/vcloud-path/etc/log4j.properties file to DEBUG on the vCloud Director virtual machine.
  • Set the Statistics level to 4 under the vCenter Server Manage tab in the vSphere Web Client.

Answer : Set the Display debug information property in the general system settings for vCloud Director to Enable.

VCPC610 VMware Certified Professional 6 Cloud Practice Test Set 3

An administrator attempts to delete a Storage Policy and receives an error.Which two object types, if assigned a Storage Policy, would prevent the Storage Policy from beingdeleted? (Choose two.)

A. A virtual machine.

B. A virtual disk.

C. A datastore.

D. A datastore cluster.



Options are :

  • D,A
  • A,B
  • B,C
  • C,D

Answer : A,B

Which workflow should the administrator follow to create a High Availability (HA) cluster?
Options are :
  • Select a datacenter, create an HA Cluster, add resources to the cluster, configure HAspecific settings, and enable HA
  • Select a datacenter, create a cluster in the datacenter, add resources to the cluster, enable HA, and configure HA-specific settings
  • Select a resource pool, create an HA Cluster in the resource pool, add resources to the cluster, configure HA-specific settings, and enable HA
  • Select a resource pool, create a cluster in the pool, add resources to the cluster, enable HA, and configure HA-specific settings

Answer : Select a datacenter, create a cluster in the datacenter, add resources to the cluster, enable HA, and configure HA-specific settings

The on-call system administrator has made a change on the ESXi host requiring a restart of themanagement network. The administrator forgot to restart the management network.Lockdown mode is configured in the Recommended configuration.Which action should the administrator take?
Options are :
  • Use an SSH client to logon to the command line and run the services mgmt-vmware restart command.
  • Logon directly to the DCUI and use the menu to restart the management network.
  • Use the vSphere client to enable the DCUI and then logon to the ESXi Shell and use the menu to restart the management network.
  • Use the vSphere client to enable local authentication services, then logon directly to the ESXi Shell and run services mgmt-vmware restart.

Answer : Logon directly to the DCUI and use the menu to restart the management network.

VCPN610 VMware Certified Professional Network Virtual Test Set 1

An ESXi 5.x host is unable to connect to a vCenter 5.x server.Which commands should an administrator use to restart the management agents on the host?
Options are :
  • SSH to the host and execute the commands /etc/init.d/vpxd restart and /etc/init.d/vpxa restart
  • SSH to the host and execute the commands /etc/init.d/hostd restart and /etc/init.d/vpxa restart
  • SSH to the host and execute the commands /etc/init.d/vmware-hostd restart and /etc/init.d/vmware-vpxa restart
  • SSH to the host and execute the commands /etc/init.d/vmware-hostd restart and /etc/init.d/vpxd restart

Answer : SSH to the host and execute the commands /etc/init.d/hostd restart and /etc/init.d/vpxa restart

A vSphere administrator needs to upgrade a single extent VMFS3 datastore to VMFS5 andexpand it to 4TB in size. The storage administrator has already expanded the underlying LUN to4TB.Which steps should the vSphere administrator take?
Options are :
  • Expand the VMFS3 datastore to 4TB and then upgrade to VMFS5
  • Upgrade the datastore to VMFS5 and then expand it to 4TB
  • Change the block size of the VMFS3 datastore to 1MB, upgrade the datastore to VMFS5, and expand it to 4TB
  • Upgrade the datastore to VMFS5, manually change the partition scheme to GPT, and then expand the datastore to 4TB

Answer : Upgrade the datastore to VMFS5 and then expand it to 4TB

During an upgrade, the ESXi 5.x installer finds an existing version of ESXi and a VMFS3 volume.No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade toVMFS5.Which option should be chosen to meet this requirement?
Options are :
  • Upgrade ESXi and overwrite the VMFS datastore
  • Install ESXi and preserve the VMFS datastore
  • Upgrade ESXi and preserve the VMFS datastore
  • Install ESXi and overwrite the VMFS datastore

Answer : Install ESXi and overwrite the VMFS datastore

VCP550D VMware Certified Professional 5 Data Center Exam Set 2

What should an administrator do to configure multi-pathing using software iSCSI?
Options are :
  • Configure NIC teaming on the associated uplinks
  • . Bind the VMkernel ports to the software iSCSI initiator
  • Configure Zoning between the hosts and SAN switches
  • Ensure jumbo frames are enabled end-to-end

Answer : . Bind the VMkernel ports to the software iSCSI initiator

The vSphere administrator needs to migrate a virtual machine from one ESXi 5.5 host to anotherESXi 5.5 host. The virtual machine has a virtual disk that is stored in local storage.Assuming only the vSphere Essentials licensing is in place, which technique should theadministrator use to accomplish the migration?
Options are :
  • vMotion migration
  • Enhanced vMotion migration
  • Storage vMotion migration
  • Cold migration

Answer : Cold migration

A new LUN has been created on an iSCSI array and assigned to an ESXi 5.x server. However,when the administrator logs in to the vSphere Web Client the LUN is not visible. Other LUNs onthe iSCSI array are visible.What should the administrator do to resolve this issue?
Options are :
  • Rescan for the new storage device
  • Ensure the LUN is zoned correctly
  • Add the new LUN to the Static Discovery list
  • Ensure the CHAP settings are correctly configured

Answer : Rescan for the new storage device

VCPC550 VMware Certified Professional Cloud Practice Test Set 10

A vSphere administrator creates a new vSphere Distributed Switch. The administrator receivesnotice from the service desk that a cluster of vSphere hosts has disconnected from vCenterServer.This disconnect occurred immediately after the new switch was created:This vSphere Distributed Switch is the only distributed switch managed by vCenter Server.The virtual machines are still functional and the applications are still accessible by end users.On the ESXi hosts, which step must the vSphere administrator take to allow vCenter Server toreconnect?
Options are :
  • Use the ESXi Shell to restart the vSphere Web Client service on each affected host
  • Use the ESXi Shell to restart the mgmt-vmware service on each affected host
  • Use the Direct Console User Interface to reattach the management vmnic to the appropriate switch
  • Use the Direct Console User Interface to disable lockdown mode on each affected host

Answer : Use the Direct Console User Interface to reattach the management vmnic to the appropriate switch

An administrator needs to export system logs for an ESXi 5.5 host to determine the rootcause for a host performance issue. This host supports manifest-driven exports of system logs.Which manifest is selected by default during the export system log wizard?
Options are :
  • PerformanceSnapshot
  • Userworld
  • HungVM
  • Hostworld

Answer : Userworld

An administrator needs to establish that a database server is entitled to twice the CPU resourcescompared to a web server during CPU resource contention.Which settings should the administrator change to accomplish this?
Options are :
  • Set the database server's CPU Shares to High and change the web server's CPU Shares value to a Custom value of 500.
  • Set the database server's CPU Shares to High and leave the web server's CPU Shares at Normal.
  • Set the database server's CPU Shares to a Custom value of 500 and leave the web server's CPU Shares at Normal.
  • Set the database server's CPU Shares to High and change the web server's CPU Shares to Low.

Answer : Set the database server's CPU Shares to High and leave the web server's CPU Shares at Normal.

VCP-410 VMware Certified Professional on VSphere 4 Exam Set 11

Which VLAN configuration requires the a switch port to be configured as an access port?
Options are :
  • Virtual Switch Tagging
  • External Switch Tagging
  • Private VLAN
  • Virtual Guest Tagging

Answer : External Switch Tagging

An administrator is using vCenter Operations Manager to monitor an environment and discoversthat the Risk badge score has decreased since the last time it was checked.What condition would explain this change?
Options are :
  • The Stress badge has decreased from 70 to 40.
  • The Time Remaining badge has decreased from 65 to 45.
  • The Capacity Remaining badge has decreased from 80 to 50.
  • The Workload badge has decreased from 75 to 50.

Answer : The Stress badge has decreased from 70 to 40.

A vSphere administrator is attempting to migrate a virtual machine, but the progress bar for themigration remains at 10%.Which issue could be preventing the vMotion migration?
Options are :
  • The virtual machine is not on shared storage visible to the source and destination hosts.
  • The vMotion network is saturated.
  • A networking problem between the source and destination hosts exists at the physical layer.
  • The vMotion migration priority for this migration was set to High.

Answer : A networking problem between the source and destination hosts exists at the physical layer.

VCP-410 VMware Certified Professional on VSphere 4 Exam Set 14

An administrator is configuring a new LDAP source.Which three pieces of information must the administrator enter into the vCloud Director Console?(Choose three.)

A. Custom LDAP service name

B. Custom Kerberos Realm

C. Custom LDAP IP address

D. Custom LDAP port number

E. Custom Base distinguished name



Options are :

  • C,D,E
  • A,B,C
  • A,D,E
  • B,C,D

Answer : C,D,E

An administrator attempts to install vCenter Single Sign-On Server. The installer returns an errormessage indicating that the installation failed. Prior to the installation, all setup prerequisites weremet. The administrator has generated a vCenter Server Single Sign-On support bundle.Which two files should the administrator analyze to determine the cause of the failure? (Choosetwo.)

A. <SSO_Server_Directory>\utils\logs\imsTrace.log

B. <SSO_Server_Directory>\utils\logs\install.txt

C. %TEMP%\utils\logs\vminst.log

D. %TEMP%\vminst.log



Options are :

  • A,B
  • B,C
  • D,A
  • C,D

Answer : D,A

What are two features provided by VMFS5? (Choose two.)

A. Support for greater than 2TB storage devices for only VMFS and Physical RDMs

B. Support for up to 32 extents

C. Support for greater than 2TB storage devices for VMFS, Physical and Virtual RDMs

D. Support for up to 64 extents



Options are :

  • D,A
  • C,D
  • B,C
  • A,B

Answer : B,C

VMware 2V0-641 Professional Network Virtualization Exam Set 2

A vSphere administrator configures a preferred heartbeat datastore in an HA/DRS clusterconfiguration. The vCenter Server identifies an alternative preferred datastore.Why would vCenter Server identify an alternative preferred datastore over the administrator'spreference?
Options are :
  • The selected datastore is an NFS datastore.
  • The selected datastore is not accessible to all of the hosts.
  • The selected datastore contains powered-on virtual machines.
  • The selected datastore is formatted with a 1 MB block size.

Answer : The selected datastore is not accessible to all of the hosts.

Which vSphere action is a prerequisite for creating an external network?
Options are :
  • Create a vSphere Port Group with VLAN Trunking
  • Create a vSphere Port Group.
  • Create a vSphere Uplink Port Group with VLAN Trunking.
  • Create a vSphere Uplink Port Group.

Answer : Create a vSphere Port Group.

A system administrator is creating a new network for a customer in a public cloud offeringthat must meet the following requirements:Web servers attached to the network must be accessible from the external network.Web servers must not be configured to use NAT.Which type of network should the administrator create?
Options are :
  • Isolated Organization Network
  • Routed Organization Network
  • Direct Connected vApp Network
  • Direct Connected Organization Network

Answer : Direct Connected Organization Network

VMware Certified Professional VCP6-DCV Practice Test Set 3

An administrator needs to change the network a virtual machine will attach to. The virtual machineis deployed using vCloud Automation Center, but when the administrator attempts to modify theconfiguration, the requested network is not displayed. Why is the network unavailable in theinterface?
Options are :
  • It is unavailable in the Build Profile.
  • It is unavailable in the Provisioning Group.
  • It is unavailable in the Blueprint.
  • It is unavailable in the Reservation.

Answer : It is unavailable in the Reservation.

A vSphere administrator can create an alarm on which two objects? (Choose two.)

A. LUN

B. Datastore

C. Template

D. Folder



Options are :

  • B,C
  • A,D
  • B,D
  • A,B

Answer : B,D

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions

Subscribe to See Videos

Subscribe to my Youtube channel for new videos : Subscribe Now