VCPC550 VMware Certified Professional Cloud Practice Test Set 11

Which information can the administrator use to identify iSCSI nodes?
Options are :
  • MAC address
  • LUN ID
  • WWN
  • IQN (Correct)

Answer : IQN

VCP550D VMware Certified Professional 5 Data Center Exam Set 8

A vSphere administrator needs to perform packet tracing from a Linux virtual machine. The virtualmachine is attached to a standard virtual switch configured with several VLANs.Which approach could the administrator use to configure the network to capture all traffic from theLinux virtual machine?
Options are :
  • Configure the port group containing the virtual machine for promiscuous mode.Set the port group to use VLAN 1.
  • Configure a distributed virtual switch with VLAN Trunking.Connect the virtual machine to the switch and enable Port Mirroring on the port group containing the virtual machine.
  • Configure the virtual switch with VLAN Trunking and specify each VLANs on the port group containing the virtual machine.
  • Configure a distributed virtual switch with VLAN Trunking. Create a port group and configure it with promiscuous mode. Connect the virtual machine to that port group. (Correct)

Answer : Configure a distributed virtual switch with VLAN Trunking. Create a port group and configure it with promiscuous mode. Connect the virtual machine to that port group.

An administrator is planning a new vSphere deployment using shared storage. The solution mustsupport:vMotionStorage vMotionFault Tolerant virtual machinesVAAI primitivesRDM disksWhich storage type will meet these requirements?
Options are :
  • NFS
  • CIFS
  • iSCSI (Correct)
  • VSAN

Answer : iSCSI

A system administrator is deploying a Windows virtual machine from a template and needs the IPaddress to be customized automatically.How should the administrator configure the IP address?
Options are :
  • Use the Microsoft Sysprep Tool. (Correct)
  • Manually configure IP addresses after the deployment has completed.
  • Use the VMware Quickprep Tool.
  • Specify IP addresses using the Deploy Virtual Machine Wizard.

Answer : Use the Microsoft Sysprep Tool.

VCPN610 VMware Certified Professional Network Virtual Test Set 5

What is a valid plug-in status for a plug-in that has been added to a vSphere client?
Options are :
  • Unknown
  • Stopped
  • Disabled (Correct)
  • Installed

Answer : Disabled

For security reasons, SSH and the ESXi Shell have been disabled on a standalone ESXi 5.x host.A vSphere administrator accesses the Direct Console User Interface (DCUI) to examine log filesrelated to a recent connection issue.Which system log can the administrator access to determine the cause of the issue?
Options are :
  • syslog (Correct)
  • fdm
  • messages
  • vmksummary

Answer : syslog

An administrator decreases the CPU share value for one of two virtual machines in a DRScluster from 1000 to 100 shares. The DRS cluster contains more resources than both virtualmachines can consume.The characteristics of the virtual machines are listed below:The second virtual machine is a clone of the first virtual machine.Both virtual machines are identical in every way.Both virtual machines are not attached to the IP network.Both virtual machines are powered on.What impact on the virtual machines' performance will be observed?
Options are :
  • The original virtual machine will perform better than the clone when contention occurs.
  • The virtual machines will have equal performance under normal conditions and reduced performance when contention occurs.
  • The virtual machines will have equal performance under all conditions. (Correct)
  • The performance of the virtual machines will reduce by a factor of ten once the share value is adjusted.

Answer : The virtual machines will have equal performance under all conditions.

VCPC510 VMware Certified Professional on VCloud Exam Set 6

Security policy requires that all administrative activity occurs through vCenter Server.Which action should a system administrator take to meet this requirement?
Options are :
  • Logon to the DCUI and navigate the menu to Troubleshooting Options and enable lockdown mode
  • Logon to the ESXi Shell and type the command service lockdown start
  • Use the vSphere client to navigate to the Security Profile of each host and enable lockdown mode on each host (Correct)
  • Use the vSphere client to right-click the cluster and enable lockdown mode on every host in the cluster at once

Answer : Use the vSphere client to navigate to the Security Profile of each host and enable lockdown mode on each host

Which installation method is not available for a new deployment of ESXi 5.x?
Options are :
  • Interactive installation
  • Scripted installation
  • Auto Deploy installation
  • Update Manager installation (Correct)

Answer : Update Manager installation

Why would a vSphere administrator configure resource shares for a virtual machine?
Options are :
  • To prioritize access to a resource during contention (Correct)
  • To guarantee access to a resource during contention
  • To prioritize access to a resource at all times
  • To guarantee access to a resource at all times

Answer : To prioritize access to a resource during contention

VCPVCD510 VMware Certified Professional 5 IAAS Practice Exam Set 3

What happens to the status of users already logged into ESXi Shell when a vSphere administratorenables lockdown mode?
Options are :
  • Users remain logged in and can run commands, except to disable lockdown mode. (Correct)
  • None
  • Users are immediately logged out of ESXi Shell.
  • Users are logged out after a timeout specified by the vSphere administrator.
  • Users remain logged in and can run commands, including to disable lockdown mode.

Answer : Users remain logged in and can run commands, except to disable lockdown mode.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions

Subscribe to See Videos

Subscribe to my Youtube channel for new videos : Subscribe Now