VCP-510 VMware Certified Professional on vSphere 5 Exam Set 8

On which two vSphere elements can traffic shaping be configured? (Choose two.)A. On a vSphere Distributed Switch dvPort for inbound and/or outbound trafficB. On a vSphere Distributed Switch for inbound and/or outbound trafficC. On a vSphere Standard Switch port group or the entire vSwitch for inbound trafficD. On a vSphere Standard Switch port group or the entire vSwitch for inbound and outbound traffic


Options are :

  • B,C
  • C,D
  • A,B (Correct)
  • A,D

Answer : A,B

VMware VDCD510 Advanced Professional Data Center Design Exam Set 6

What would be a valid reason to enable traffic shaping? 


Options are :

  • Limiting the bandwidth of a FTP server (Correct)
  • Limiting the bandwidth used by an independent hardware iSCSI adapter
  • Restricting the load on a IDS server
  • Improving the performance of a CPU-intensive application server

Answer : Limiting the bandwidth of a FTP server

Which two statements are true regarding vSphere virtual switch uplinks? (Choose two.)  A. vSphere virtual switches do not need to be configured with an uplink.B. Multiple vSphere virtual switches can be configured to use the same uplink.C. vSphere virtual switches must be configured with at least one uplink.D. Multiple vSphere virtual switches cannot be configured to use the same uplink.


Options are :

  • A,D (Correct)
  • B,C
  • A,B
  • C,D

Answer : A,D

Which is an important benefit provided by VLANs? 


Options are :

  • Increased security on a network segment
  • Increased broadcast traffic
  • Reduced hardware requirements (Correct)
  • Fault tolerance

Answer : Reduced hardware requirements

An administrator is working to implement Storage Profiles in their environment.Which two ways can storage capabilities be generated? (Choose two.)A. They are generated by Datastore Clusters as LUNs are added to the cluster.B. They are automatically determined by the Storage Profile when it is created.C. They can be retrieved from the array through the VMware APIs for Storage Awareness (VASA).D. They can be manually generated by the administrator.


Options are :

  • A,B
  • B,C
  • C,D (Correct)
  • A,D

Answer : C,D

Which types of traffic can a VMkernel port be enabled to carry on a ESXi 5.x host? (Choosethree.)A. NFSB. Fault TolerantC. ManagementD. iSCSIE. vMotion


Options are :

  • A,B,C
  • B,C,E (Correct)
  • A,C,D
  • C,D,E

Answer : B,C,E

A vSphere Standard Switch has been configured for IP-based load balancing using two uplinks.A new uplink is added to the vSwitch.What is the status of the uplink by default?


Options are :

  • The uplink is marked as active, but cannot be used by the active NIC team until it is added to the existing 802.3ad group on the physical switch. (Correct)
  • The uplink is marked as unused until it is added to the active NIC team.
  • The uplink is placed in standby mode until it is added to the active NIC team.
  • The uplink is marked as active but does not participate in the active NIC team until assigned to a port group.

Answer : The uplink is marked as active, but cannot be used by the active NIC team until it is added to the existing 802.3ad group on the physical switch.

VCP550D VMware Certified Professional 5 Data Center Exam Set 1

Networking policies for a vSphere Standard Switch, such as traffic shaping and security, can be overridden on which vSphere elements? 


Options are :

  • On the virtual machine
  • On the physical network interface
  • On the physical switch
  • On the port group (Correct)

Answer : On the port group

A vSphere Standard Switch has been configured for IP-based load balancing using two uplinks. A new uplink is added to the vswitch. What additional configuration is required by default? 


Options are :

  • The uplink is placed in standby mode until it is added to the active NIC team.
  • The physical switch must add the new port to the existing 802.3ad group (Correct)
  • The uplink is considered active, but it will not participate in the active NIC team until assigned to a port group.
  • The uplink is automatically marked as unused when it is added to IP-based NIC team.

Answer : The physical switch must add the new port to the existing 802.3ad group

An administrator has configured a vSphere Distributed Switch to send all network traffic to acollector virtual machine for analysis. However, after checking the collector virtual machine severalhours later the administrator finds that no data has been collected. vSphere 5.x has beendeployed in the datacenter.Which two items below could be causing this issue? (Choose two.)A. The source virtual machine does not have Promiscuous Mode enabled.B. The source and target virtual machines are not both the same on the vSphere DistributedSwitch.C. The port group or distributed does not have Promiscuous Mode enabled.D. The port group or distributed port does not have NetFlow enabled.


Options are :

  • A,B
  • A,C
  • B,D (Correct)
  • C,D

Answer : B,D

VCPN610 VMware Certified Professional Network Virtual Test Set 2

Which type of port on a secondary private VLAN can communicate with promiscuous ports and other ports that share its VLAN tag?   


Options are :

  • Trunked
  • Promiscuous
  • Community (Correct)
  • Isolated

Answer : Community

An administrator has determined that storage performance to a group of virtual machines isreduced during peak activity. The virtual machines are located in a VMFS datastore calledProduction1 on an active-active storage array. The ESXi 5.x host running the virtual machines isconfigured with an MRU multipathing policy.Which two actions can be taken to improve the storage performance of these virtual machines?(Choose two.)A. Add virtual storage, create a VMFS datastore called Production2 on the new storage, and thenmigrate some of the virtual machines from Production1 to Production2.B. Change the storage multipathing policy to Round Robin.C. Add physical storage, create a VMFS datastore called Production2 on the new storage, andthen migrate some of the virtual machines from Production1 to Production2.D. Change the storage multipathing policy to Fixed with default settings.


Options are :

  • B,C (Correct)
  • C,D
  • A,D
  • A,B

Answer : B,C

What are two network load-balancing policies for a vSphere Distributed Switch? (Choose two.)A. Route based on source MAC hashB. Route using physical NIC loadC. Route based on the destination virtual port IDD. Route based on port IP hash


Options are :

  • A,D (Correct)
  • B,D
  • B,C
  • A,C

Answer : A,D

VCPVCD510 VMware Certified Professional 5 IAAS Practice Exam Set 3

When creating a dvPort group, which port binding option assigns a port to a virtual machine when the virtual machine is first powered on?   


Options are :

  • Ephemeral
  • Static binding
  • Dynamic binding (Correct)
  • Flexible

Answer : Dynamic binding

In vSphere, a bound physical NIC can be configured to transmit and receive jumbo frames. What is the default maximum transmission unit (MTU) in vSphere? 


Options are :

  • 9500
  • 5500
  • 1500 (Correct)
  • 9000

Answer : 1500

Assuming that VLANs are not configured, what is true about traffic from a virtual machine connected to a port group on a vSphere Standard Switch with no uplinks?   


Options are :

  • Virtual machines on any vSphere Standard Switch on the same ESXi host can receive the traffic
  • The virtual switch will drop the packets if no uplink is present.
  • vMotion will not migrate any Virtual machines connected to a port group on the virtual switch. (Correct)
  • Virtual machines in any port group on the virtual switch can monitor all of the traffic

Answer : vMotion will not migrate any Virtual machines connected to a port group on the virtual switch.

VCPN610 VMware Certified Professional Network Virtual Test Set 2

Which three requirements must be met in order to use Storage I/O Control? (Choose three.)A. The datastore must contain multiple VMFS extents.B. The datastore must contain a single NFS volume.C. The datastore must not include virtual machines with snapshots.D. The datastore must be managed by a single vCenter Server.E. Array-based automated storage tiering must be explicitly certified.




Options are :

  • B,C,D
  • B,D,E (Correct)
  • A,C,E
  • A,C,D

Answer : B,D,E

When would an administrator configure the Explicit Failover option for a portgroup created on a virtual switch with multiple uplinks? 


Options are :

  • To share uplinks between vSwitches
  • When configuring iSCSI Software Initiator multipathing (Correct)
  • If the physical switch does not support etherchannel or 802.3ad
  • To manually configure load balancing for the portgroup

Answer : When configuring iSCSI Software Initiator multipathing

Which two statements are true regarding vSphere standard switches? (Choose two.)A. Beaconing requires at least three uplinks to be considered useful.B. Virtual machines on different vSwitches require the vSwitches to share an uplink tocommunicate.C. vSphere virtual switches require at least one uplink adapter.D. Setting the number of ports to the maximum on a vSwitch will exhaust the total ports on a host.


Options are :

  • A,D (Correct)
  • C,D
  • A,B
  • B,C

Answer : A,D

VCP-410 VMware Certified Professional on VSphere 4 Exam Set 8

An administrator wants to determine the current network adapter configuration for an uplink on anESXi 5.x host.Which three items can be viewed from the Network Adapters section of the Configuration tab,using the vSphere Client? (Choose three.)A. VLAN configurationB. Adapter DriverC. Actual speed and duplexD. Adapter NameE. vSwitch configuration


Options are :

  • A,C,D
  • C,D,E (Correct)
  • A,B,C
  • B,C,D

Answer : C,D,E

A database administrator has requested a disk for a virtual machine that will run an I/O intensivedatabase application on an ESXi 5.x host. Which two disk types will best fit the needs of theapplication? (Choose two.)A. Raw Device Mapped DiskB. Thin Provisioned DiskC. Thick Provision Lazy Zeroed DiskD. Thick Provision Eager Zeroed Disk


Options are :

  • A,D (Correct)
  • C,D
  • A,C
  • B,C

Answer : A,D

VCPC510 VMware Certified Professional on VCloud Exam Set 5

A new ESXi 5.x host is set up with two virtual machines. A memory limit is applied so that users will have predictable performance as virtual machines are added to the host. What is the effect of applying a memory limit to these virtual machines? 


Options are :

  • . Physical memory will be granted above the limit under normal conditions. Disk pages will be used if contention occurs.
  • Physical memory will be granted above the limit under normal conditions, unless physical memory runs out.
  • No physical memory will be granted above the limit, but VSWP can be used (Correct)
  • No physical memory will be granted above the limit, unless expandableVM shares are set to high.

Answer : No physical memory will be granted above the limit, but VSWP can be used

The storage administrator is preparing an action plan to upgrade a Fibre Channel storage array.The current plan will result in extended downtime for a VMFS LUN that is part of a SDRS cluster.What steps can be taken in a vSphere 5.x environment to minimize the impact of the downtime?(Choose two.)A. Ensure there are multiple active paths to the LUNB. Ensure DRS is configured properlyC. Use Storage vMotion to migrate the affected VMDKsD. Place the datastore into maintenance mode


Options are :

  • C,D (Correct)
  • B,C
  • A,D
  • A,B

Answer : C,D

How can you verify vStorage APIs for Array Integration (VAAI) is enabled? 


Options are :

  • "VAAI" listed on the Hard Disk properties page for any VMDK stored on a compliant array
  • "Hardware Acceleration" listed on the Hard Disk properties page for any VMDK stored on a compliant array
  • "VAAI" column for any datastore created on a compliant array
  • "Hardware Acceleration" column for any datastore created on a compliant array (Correct)

Answer : "Hardware Acceleration" column for any datastore created on a compliant array

VMware VDCD510 Advanced Professional Data Center Design Exam Set 7

Users are experiencing performance issues when updating their database hosted on a virtual   machine. The administrator determines that disk I/O is high across one of the HBAs on the ESXihost containing the virtual machine.What is the action will most likely correct the issue without significantly impacting other users ordatastores?


Options are :

  • Use Storage vMotion to migrate the virtual machine to a new VMFS5 datastore
  • Map additional LUNs to the ESXi host and extend the datastores
  • Migrate the virtual machine to an NFS datastore using Storage vMotion
  • Manually configure the disk multipathing policy to Round Robin for the datastore (Correct)

Answer : Manually configure the disk multipathing policy to Round Robin for the datastore

When comparing software iSCSI initiators with independent hardware initiators, what are theadditional CHAP security levels available for a software implementation? (Choose two.)A. Do not use CHAP unless required by targetB. Use CHAPC. Use CHAP unless prohibited by targetD. Do not use CHAP


Options are :

  • B,C
  • A,D
  • A,B (Correct)
  • C,D

Answer : A,B

An administrator is configuring an ESXi 5.x host with two dual-port Fibre Channel (FC) HBAs. TheFC storage array has four active storage processor ports. Zoning is configured on both fabrics,with ESXi HBA ports and the array ports in the same zone. There are two LUNs with VMFSdatastores configured.Using Round Robin multipathing, what is the maximum number of paths that can be used to senddata to the VMFS datastores at any given time?


Options are :

  • 4
  • 3
  • 1
  • 2 (Correct)

Answer : 2

VCPC510 VMware Certified Professional on VCloud Exam Set 8

QUESTION NO: 150What are two valid Resource settings that can be set at the vApp level? (Chose two.)A. NetworkB. CPUC. MemoryD. Disk


Options are :

  • B,C (Correct)
  • C,D
  • A,D
  • A,B

Answer : B,C

When planning for an upgrade from vSphere4 to vSphere5 what will be the effect of upgrading a 1TB VMFS3 datastore with a 2MB block size to VMFS5? 


Options are :

  • Thin virtual disks can be expanded to a maximum of 2TB. (Correct)
  • Thick virtual disks can be expanded to a maximum of 512GB.
  • Thin virtual disks can be expanded to a maximum of 512GB.
  • Thick virtual disks can be expanded to a maximum of 2TB

Answer : Thin virtual disks can be expanded to a maximum of 2TB.

Which are the correct parameters to specify when adding an iSCSI target to an ESXi 5.x host using the Static Discovery tab? 


Options are :

  • iSCSI server ip address, port 3260
  • iSCSI server ip address, port 902, iSCSI target name
  • isCSI server ip address, port 3260, iSCSI target name (Correct)
  • iSCSI server ip address, port 902

Answer : isCSI server ip address, port 3260, iSCSI target name

VMware VDCD510 Advanced Professional Data Center Design Exam Set 8

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions