VCP-410 VMware Certified Professional on VSphere 4 Exam Set 21

Raw Device Mapping using Physical Compatibility Mode is required for which of the followingvSphere features (Choose Two)?A. Array-based SnapshotsB. N-port ID VirtualizationC. SAN Management AgentsD. MSCS Clustering across ESX/ESXi hosts


Options are :

  • A,C (Correct)
  • D,C
  • A,D
  • A,B

Answer : A,C

When writes from a virtual machine are delivered to a Fibre Channel Storage Array, which of thefollowing actions is taken by the VMkernel (Choose Two)?A. The I/O request is converted from binary data form to optical formB. The request for blocks on the virtual disk is mapped to blocks on the appropriate physicaldeviceC. The modified I/O request is sent from the physical HBA to the device driverD. The file corresponding to the virtual machine is located on the VMFS datastore


Options are :

  • A,D
  • B,C
  • B,A
  • B,D (Correct)

Answer : B,D

VMware Certified Professional VCP6-DCV Practice Test Set 6

Which of the following CHAP Authentication mechanisms is available when using Software iSCSI,but not Hardware iSCSI?


Options are :

  • Per-Target CHAP
  • Per-Subnet CHAP
  • Mutual CHAP (Correct)
  • One-way CHAP

Answer : Mutual CHAP

What is the maximum configurable number of NFS datastores that can be mounted to anESX/ESXi 4 Host?


Options are :

  • 64 (Correct)
  • 8
  • 16
  • 32

Answer : 64

A company wants to increase disk capacity for their VMware vSphere environment. Managementmandates that:(1) vMotion must work in this environment(2) The existing LAN infrastructure must be used(3) The storage must support Raw Device MappingWhich storage option would best meet company objectives?


Options are :

  • NFS
  • iSCSI (Correct)
  • Fibre Channel
  • SATA

Answer : iSCSI

VCP-410 VMware Certified Professional on VSphere 4 Exam Set 8

When configuring a FC-SAN with ESX/ESXi 4.x, which of the following are valid requirementsand/or recommendations (Choose Two)?A. Each LUN should contain only one VMFS datastoreB. RDMs should not be used to access raw disks from previous ESX 2.5 or 3.x HostsC. Each LUN must present the same LUN ID number to all ESX/ESXi hostsD. Virtual machine multipathing software should be used to perform I/O load balancing toindividual LUNs


Options are :

  • A,B
  • A,C (Correct)
  • A,D
  • B,C

Answer : A,C

VCPVCD510 VMware Certified Professional 5 IaaS Exam Set 3

When using the Explicit Failover option for a virtual switch with multiple uplinks, ESX determinesthe uplink to use in a failover event by:


Options are :

  • using link state tracking to see which uplinks are connected
  • using the reported uptime to determine which uplink to select
  • a specified list (Correct)
  • using beacon probing to discover which uplink has the shortest route

Answer : a specified list

Which of the following are modules that are not pre-installed and must be added to a vCenterinstallation (Choose Three)?A. VMware vCenter ConverterB. VMware vCenter Update ManagerC. VMware vCenter OrchestratorD. VMware vCenter Storage MonitoringE. VMware vCenter Guided Consolidation


Options are :

  • A,B,C
  • A,B,D
  • D,B,E
  • A,B,E (Correct)

Answer : A,B,E

What is the default port used by iSCSI in a VMware vSphere environment?


Options are :

  • 2049
  • 3260 (Correct)
  • 902
  • 443

Answer : 3260

VCP-410 VMware Certified Professional on VSphere 4 Exam Set 5

What is the maximum number of LUNs that can be assigned per ESX/ESXi host?


Options are :

  • 127
  • 128
  • 255
  • 256 (Correct)

Answer : 256

An ESX/ESXi host gains exclusive access to virtual machines created on NFS datastores usingwhich of the following mechanisms?


Options are :

  • a special .lck-XXX lock file (Correct)
  • Distributed File Locking
  • NFS File Locking Protocol
  • SCSI Reservations

Answer : a special .lck-XXX lock file

An administrator is configuring software iSCSI multipathing. Which of the following is the minimumrequired configuration for Round Robin multipathing?


Options are :

  • Configure 1 VMkernel port.Connect the port to a switch with multiple uplinks.Choose the Round Robin Path Selection Plugin (PSP)
  • Configure 2 VMkernel ports.Bind each port to a different uplink on the same virtual switch.Choose the Round Robin Path Selection Plugin (PSP) (Correct)
  • Configure 2 VMkernel ports.Connect each port to a unique virtual switch with uplinks on separate subnets.Choose the Round Robin Path Selection Plugin (PSP)
  • Configure 1 VMkernel port.Bind the port to multiple uplinks on the same virtual switch.Choose the Round Robin Path Selection Plugin (PSP)

Answer : Configure 2 VMkernel ports.Bind each port to a different uplink on the same virtual switch.Choose the Round Robin Path Selection Plugin (PSP)

VCPC550 VMware Certified Professional Cloud Practice Test Set 2

Beacon Probing is used in vSphere networking to:


Options are :

  • identify when an upstream link failure has occurred (Correct)
  • identify which uplink has the longest reported uptime
  • discover alternate default gateway addresses
  • discover which uplink has the shortest route

Answer : identify when an upstream link failure has occurred

Which of the following statements are true about shared storage capabilities on NFS datastoressupported by VMware ESXi 4.x (Choose Two)?A. You can use VMware Consolidated Backup with an NFS datastore.B. You can use Storage vMotion to move virtual machines between NFS datastores.C. You can create Raw Device Mapped (RDM) virtual disks on NFS datastores.D. You can cluster virtual machines using MSCS across ESXi hosts using an NFS datastore.


Options are :

  • A,C
  • A,D
  • C,B
  • A,B (Correct)

Answer : A,B

Which of the following network policies is only available with vNetwork Distributed Switches?


Options are :

  • Traffic Shaping Policy
  • VLAN Policy
  • Port Blocking Policy (Correct)
  • Security Policy

Answer : Port Blocking Policy

VMware Certified Professional VCP6-DCV Practice Test Set 6

Which of the following features can be used in combination with Network Attached Storage(Choose Three)?A. MSCS ClusteringB. Storage vMotionC. VMware HAD. Virtual Machine SnapshotsE. Raw Device Mapping


Options are :

  • B,C,D (Correct)
  • E,C,D
  • B,C,E
  • B,C,S

Answer : B,C,D

Which of the following steps, required for iSCSI software multipathing, must be performed usingthe esxcli interface?


Options are :

  • Binding the VMkernel ports to the selected uplinks
  • Connecting the VMkernel ports to the virtual switch
  • Connecting the iSCSI software initiator to the VMkernel ports (Correct)
  • Configuring Dynamic Discovery for the iSCSI software initiator

Answer : Connecting the iSCSI software initiator to the VMkernel ports

Which of the following is a valid object to add an extent to?


Options are :

  • an existing VMFS datastore (Correct)
  • an available unused storage volume
  • an existing VMFS or NFS datastore
  • an existing NFS datastore

Answer : an existing VMFS datastore

VCP-410 VMware Certified Professional on VSphere 4 Exam Set 19

An administrator decides to implement a Fixed multipathing policy for an ESXi host with fouravailable paths and four configured VMFS datastores. After enabling the policy for each datastore,how many paths by default will be used by the host to send data to the four datastores?


Options are :

  • 1 (Correct)
  • 2
  • 3
  • 4

Answer : 1

Which of the following describes the functionality of traffic shaping on a vNetwork DistributedSwitch?


Options are :

  • vNetwork Distributed Switches support Best-Effort Traffic Shaping based on Quality of Service (QoS)
  • vNetwork Distributed Switches support both Ingress and Egress Traffic Shaping (Correct)
  • vNetwork Distributed Switches support Ingress Traffic Shaping only
  • vNetwork Distributed Switches support Egress Traffic Shaping only

Answer : vNetwork Distributed Switches support both Ingress and Egress Traffic Shaping

Ports on a secondary Private VLAN that communicate only with Promiscuous ports are:


Options are :

  • Community
  • Trunked
  • Isolated (Correct)
  • Promiscuous

Answer : Isolated

VMware Certified Professional VCP6-DCV Practice Test Set 1

How are new LUNs discovered by an ESXi host?


Options are :

  • ESXi hosts automatically detect new LUNs as they are presented
  • A manual rescan operation is required every time a new LUN is added (Correct)
  • A reboot operation is required every time a new LUN is added
  • A rescan operation is periodically performed by ESXi hosts to detect any new LUNs

Answer : A manual rescan operation is required every time a new LUN is added

When creating a Service Console port, what is the purpose of the gateway device (Choose Two)?A. The gateway device is the network adapter used for the default route.B. A gateway device is always required.C. The gateway device is the Service Console port used for VMkernel networking.D. A gateway device is required when two or more uplinks are using the same subnet.


Options are :

  • A,C
  • A,D (Correct)
  • B,D
  • A,B

Answer : A,D

Which of the following components must be modified in order to enable Jumbo Frame support forthe Software iSCSI Initiator (Choose Two)?A. The virtual machine port groupB. The iSCSI vmhbaC. The virtual switchD. The VMkernel port


Options are :

  • C,A
  • B,D
  • C,B
  • C,D (Correct)

Answer : C,D

VCPC550 VMware Certified Professional Cloud Practice Test Set 3

Which is an important benefit provided by VLANs?


Options are :

  • higher network availability
  • higher tolerance to broken physical hardware
  • reduced broadcast traffic (Correct)
  • improved fault isolation

Answer : reduced broadcast traffic

When creating a dvPort group, which of the following port binding options assigns a port to avirtual machine when the virtual machine is connected to the dvPort Group?


Options are :

  • Static Binding (Correct)
  • Dynamic Binding
  • Flexible
  • Ephemeral

Answer : Static Binding

Which of the following methods can be used to migrate a virtual machine from a vNetworkStandard Switch to a vNetwork Distributed Switch (Choose Two)?A. Edit the Network Adapter settings for the VM and select a dvPort group from the list.B. Migrate the port group containing the VM from a vNetwork Standard Switch using the MigrateVirtual Machine Networking option.C. Edit the Virtual Adapter settings for the ESXi host and select a dvPort group from the list.D. Select the VM from a list of virtual machines using the Migrate Virtual Machine Networkingoption.


Options are :

  • B,D
  • A,B
  • A,C
  • A,D (Correct)

Answer : A,D

2V0-631 VMWare Certified Professional6 Cloud Management Test Set 2

An administrator is creating a vNetwork Standard Switch with Service Console and VMkernelnetworking. The administrator has two uplinks attached to the switch, but wants to separate theService Console and VMkernel traffic to the two uplinks. Which of the following Load BalancingPolicies will guarantee this, even if additional management or virtual machine traffic is added tothe switch in the future?


Options are :

  • Route based on the originating port ID
  • Route based on IP hash
  • Use Explicit Failover (Correct)
  • Route based on source MAC hash

Answer : Use Explicit Failover

When coordinating the VMware NMP and any installed third-party MPPs, the PSA performs whichof the following tasks?


Options are :

  • Manages physical path claiming and unclaiming
  • Associates physical paths with logical devices
  • Processes I/O requests to logical devices
  • Implements logical device bandwidth sharing (Correct)

Answer : Implements logical device bandwidth sharing

Which two are valid network load balancing policies for a vNetwork Distributed Switch (ChooseTwo)?A. route using round-robinB. route based on source and destination MAC hashC. route based on the originating virtual port IDD. route based on IP hash


Options are :

  • B,D
  • C,D (Correct)
  • C,A
  • C,B

Answer : C,D

VCP-510 VMware Certified Professional on vSphere 5 Exam Set 3

Which of the following statements characterize the VMware Virtual Machine File System (VMFS)(Choose Two)?A. The VMFS prioritizes single virtual machine workloads for optimal performanceB. The VMFS is optimized to run multiple virtual machines as a single workloadC. SCSI commands issued by virtual machines are passed through to the VMFS file systemD. SCSI commands issued by virtual machines are translated at the virtualization layer to VMFSfile operations


Options are :

  • A,D
  • B,D (Correct)
  • B,C
  • B,A

Answer : B,D

What are two functions of zoning in Fibre Channel Switches (Choose Two)?A. Controls and isolates LUNs on a Fibre Channel Storage ArrayB. Prevents non-ESX Hosts from possibly destroying VMFS dataC. Restrict connections on a storage array to ESXi hosts that utilize the arrayD. Reduces the number of targets and LUNs presented by a Fibre Channel Storage Array


Options are :

  • B,C (Correct)
  • A,C
  • B,D
  • B,A

Answer : B,C

Which of the following types of datastores can be unmounted (Choose Two)?A. VMFS datastore copies mounted without resignaturingB. Only NFS datastores configured as Read OnlyC. Any NFS datastoreD. VMFS datastore copies mounted with resignaturing


Options are :

  • A,B
  • A,D
  • D,C
  • A,C (Correct)

Answer : A,C

VCPC550 VMware Certified Professional Cloud Practice Test Set 7

An administrator is unable to connect a vSphere Client to an ESXi Host. Which of the followingoptions can be selected from the Direct Console to restore connectivity without disrupting runningvirtual machines?


Options are :

  • Restore the Standard Switch
  • Restart the Management Network
  • Restart the Management Agents (Correct)
  • Disable the Management Network

Answer : Restart the Management Agents

An administrator is configuring an ESXi host with 2 Fibre Channel HBAs. The attached FC StorageArray has two active Storage Processor ports. No zoning is configured. Using Round Robinmultipathing, how many paths are used to send data to a VMFS Datastore at any given time?


Options are :

  • 2
  • 1 (Correct)
  • 3
  • 4

Answer : 1

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions