VCP-410 VMware Certified Professional on VSphere 4 Exam Set 12

For mirrored volumes with logging enabled, resynchronization is faster, because only regions that are marked _____ need to be resynchronized after a crash.


Options are :

  • Needsync
  • Stale
  • Detached
  • Dirty

Answer : Dirty

Which Veritas Volume Manager command displays the status of a vxrecover command?


Options are :

  • vxprint
  • vxstat
  • vxrecover
  • vxtask

Answer : vxtask

Which vxsnap command option recreates a space-optimized instant snapshot?


Options are :

  • Reassociate
  • Reattach
  • Refresh
  • Restore

Answer : Refresh

VMware VDCD510 Advanced Professional Data Center Design Exam Set 8

What is the virtual object that Volume Manager uses to represent the structured or ordered collection of subdisks?


Options are :

  • Disk group
  • Volume
  • Plex
  • Vmdisk

Answer : Plex

Which command can be used to remove a mirror from a volume? (Choose two.)

A. vxedit

B. vxassist

C. vxremove

D. vxevac

E. vxmirror


Options are :

  • A,B
  • E,A
  • B,C
  • C,D
  • D,E

Answer : A,B

When backing up a virtual machine using a backup server running in another VM on the sameESX/ESXi host, which of the following benefits are realized? 


Options are :

  • Load on the ESX/ESXi host is reduced.
  • A backup window is not needed.
  • Backup time is reduced since the backup uses CPU cycles
  • A full virtual machine restore is possible

Answer : Backup time is reduced since the backup uses CPU cycles

VCPVCD510 VMware Certified Professional 5 IAAS Practice Exam Set 5

What is the technology VMware Data Recovery uses to back up a Windows 2003 virtual machine?


Options are :

  • Volume Shadow Copy Service
  • EMC Autostart Manager
  • LGTO SYNC driver
  • Crash-consistent quiescing

Answer : Volume Shadow Copy Service

Which of the following steps are required before VMware Data Recovery can be used (ChooseTwo)?A. The VMware Data Recovery server component must be installed on the vCenter Servermachine.B. A network storage device or hard disk must be added to the Backup Appliance.C. The vSphere Client Plug-in must be installed on the vCenter Server machine.D. The VMware Data Recovery Backup Appliance must be installed to a managed ESX/ESXi host.


Options are :

  • B,A
  • B,D
  • B,C
  • C,D

Answer : B,D

What is the maximum number of deduplication stores per VMware Data Recovery backupappliance?


Options are :

  • 8
  • 16
  • 4
  • 2

Answer : 2

2V0-620 VMware VSphere 6 Foundations Practice Exam Set 3

An administrator decides to use vCenter Data Recovery to back up virtual machines. Afterdownloading the VMware Data Recovery virtual appliance and importing it into vCenter, theadministrator does not see the plugin listed as an available plugin in vCenter.What additional action must be taken before the plugin is available in vCenter?


Options are :

  • The VMwareDataRecoveryPlugin.msi file must be installed on the system running the vSphere Client
  • The VMwareDataRecoveryPlugin.msi file must be installed on the vCenter Server
  • The vCenter Server Service must be restarted
  • The VMwareDataRecoveryPlugin.msi file must be installed on the VDR Appliance

Answer : The VMwareDataRecoveryPlugin.msi file must be installed on the system running the vSphere Client

An administrator decides to use vCenter Data Recovery to backup some key virtual machines.Which of the following describes the process needed to install vCenter Data Recovery?


Options are :

  • Run the vCenter installer using Custom as the choice for type of installation then follow the prompts to install the tool
  • Download the OVF and copy it to a datastore that is visible to the managed hosts.Right-click on the .ovf file and choose Add to Inventory
  • Locate the folder on the vCenter media and install VDR to the vCenter Server
  • Download the OVF and import it using the vSphere Client

Answer : Download the OVF and import it using the vSphere Client

An administrator is in the process of upgrading ESX 3.5 Hosts to vSphere. vCenter Data Recoveryhas been installed and configured to back up the virtual machines in the datacenter. However,after a scheduled backup it appears that not all of the virtual machines selected were successfullybacked up.What is most likely the cause for this issue?


Options are :

  • The virtual machines which were not backed up are running unsupported Operating Systems.
  • Some of the virtual machines were running during the backup window
  • Some of the virtual machines are on the ESX 3.5 hosts
  • The affected virtual machines did not have the VDR agent installed

Answer : Some of the virtual machines are on the ESX 3.5 hosts

2V0-641 VMware Certified Professional 6 Network Virtual Exam Set 5

An administrator attempts to connect to the Web Access Service on an ESX host, but is unable toestablish a connection. Which of the following commands executed from a SSH Client connectedto the ESX host would resolve the problem?


Options are :

  • service mgmt-vmware restart
  • service vmware-webAccess restart
  • service vmware-hostd restart
  • esxcfg-firewall -e webAccess

Answer : service vmware-webAccess restart

If you cannot connect to a standalone ESX host with the vSphere Client, which command wouldyou use to verify that the VMware Host Agent is running (Choose Two)?A. service mgmt-vmware statusB. esxcfg-infoC. vmware -vD. ps -ef | grep hostd


Options are :

  • A,C
  • A,D
  • A,B
  • B,D

Answer : A,D

To list the current firewall settings which command would you use?


Options are :

  • esxcfg-firewall -q
  • esxcfg-firewall -d
  • esxcfg-firewall -l
  • esxcfg-firewall -u

Answer : esxcfg-firewall -q

VCPC510 VMware Certified Professional on VCloud Exam Set 7

An Administrator is troubleshooting an ESX 4.x host and needs to export diagnostic information.The host is currently managed by a vCenter Server instance.How can the information be gathered using the vSphere Client (Choose Two)?A. From the vSphere Client, click File, Export and Export System Logs.Select the affected ESXhost.Deselect Include information from vCenter Server and vSphere Client.Select a location andclick OK.B. Click Home, then Administration.Click System Logs, then click the Export System Logsbutton.Select the affected ESX host.Deselect Include information from vCenter Server andvSphere Client.Select a location and click OK.C. From the vSphere Client, highlight the affected ESX host.Right-click the host and select ExportDiagnostic Data.Select a location and click OK.D. Click Home, then Administration.Click System Logs, then select the affected ESX host from thedrop-down list.Right-click the host and select Export Diagnostic Data.Select a location and clickOK.


Options are :

  • A,B
  • A,D
  • A,C
  • C,B

Answer : A,B

The remote console performance for a virtual machine on an ESXi Host appears to be degraded.Which of the following could be a possible cause of the problem (Choose Two)?A. The physical NIC assigned to the VMkernel port group has a speed or duplex mismatchB. The virtual NIC assigned to the virtual machine has a speed or duplex mismatchC. The physical NIC assigned to the Service Console port group has a speed or duplex mismatchD. The physical NIC assigned to the virtual machine port group containing the affected virtualmachine has a speed or duplex mismatch


Options are :

  • A,B
  • A,D
  • A,C
  • C,D

Answer : A,D

Which type of Virtual SCSI adapter must be used for a Windows Server 2008 server in a MSCScluster?


Options are :

  • BusLogic SAS
  • LSI Logic Parallel
  • LSI Logic SAS
  • BusLogic Parallel

Answer : LSI Logic SAS

VMware VDCD510 Advanced Professional Data Center Design Exam Set 4

When configuring the NTP server with MSCS clustered virtual machines, the best practice is:


Options are :

  • Synchronize domain controllers and cluster nodes with a common NTP server and enable host based time synchronization in the guest.
  • Enable host based time synchronization for domain controllers, cluster nodes and guest virtual machines.
  • NTP should not be used in conjunction with MSCS clustered virtual machines.
  • Synchronize domain controllers and cluster nodes with a common NTP server, and disable host based time synchronization in the guest.

Answer : Synchronize domain controllers and cluster nodes with a common NTP server, and disable host based time synchronization in the guest.

When creating an MSCS Cluster across two ESXi 4.x hosts, what type of virtual disks can beused?


Options are :

  • Raw Device Mapped (RDM) disks in Physical or Virtual Compatibility Mode
  • Raw Device Mapped (RDM) disks in Physical Compatibility Mode only
  • Raw Device Mapped (RDM) disks in Virtual Compatibility Mode only
  • Raw Device Mapped (RDM) disks in Physical or Virtual Compatibility Mode, or virtual disks on a shared VMFS datastore

Answer : Raw Device Mapped (RDM) disks in Physical or Virtual Compatibility Mode

Which of the following resource management techniques could be used to relieve a networkbottleneck caused by a VM with occasional high outbound network activity?


Options are :

  • convert the switch from a vNetwork Standard Switch to a vNetwork Distributed Switch
  • apply traffic shaping to the other VMs in the same port group
  • apply traffic shaping to the port group containing the virtual machine
  • apply traffic shaping to the VM with high activity

Answer : apply traffic shaping to the port group containing the virtual machine

2V0-641 VMware Certified Professional 6 Network Virtual Exam Set 5

An Administrator has determined that storage performance to a group of virtual machines isreduced during peak activity. The VMs are all located in a VMFS datastore called Production1 onan Active/Active storage array. The ESXi host running the VMs is currently configured with anMRU multipathing policy.Which of the following actions could be taken to improve the storage performance of these VMs(Choose Two)?A. Change the storage multipathing policy to Round-Robin.B. Change the storage multipathing policy to Fixed.C. Add additional physical storage and add an extent to the VMFS datastore called Production1.D. Add additional physical storage, create a new VMFS datastore calledProduction2 on the newstorage,then migrate a portion of the VMs from Production1 to Production2.


Options are :

  • A,C
  • A,D
  • A,B
  • B,D

Answer : A,D

Which of these factors indicates a high likelihood that the performance of a virtual machine isbeing constrained by disk I/O?


Options are :

  • A large number of kilobytes read and written
  • A high device latency value
  • A large number of bus resets
  • A large number of commands issued

Answer : A high device latency value

An administrator is responsible for enabling file access for desktop users. A number of users havelogged complaints that they cannot access their files. An alert in the vSphere client states thatstorage connectivity to all hosts has been triggered. The storage screen indicates everything isconnected, but the triggered alert has not been acknowledged.Which of the following would successfully correct the user access issue?


Options are :

  • Reconnect the storage containing the users files to the host which is running the File sharing virtual machine.Rescan the storage on all the hosts in the cluster.
  • Reconnect the storage containing the users files to the host which is running the File sharing virtual machine.Rescan the affected host, then refresh the remaining hosts if needed.
  • Rescan the storage on the File sharing virtual machine on which the users are seeing the problem.
  • Tell each user to reboot their computers

Answer : Reconnect the storage containing the users files to the host which is running the File sharing virtual machine.Rescan the affected host, then refresh the remaining hosts if needed.

VCP-510 VMware Certified Professional on vSphere 5 Exam Set 2

Recently, a network interface card in an ESXi 4.x host has been experiencing inconsistentconnectivity states.Which of the following two methods could be used to quickly identify the issue and immediatelynotify an administrator so the issue can be resolved (Choose Two)?A. Set up an alarm with the Network Redundancy Degraded trigger and configure an SNMP trapfor notification when the connection is lostB. Set up an alarm with the Lost Network Redundancy trigger to send an e-mail for notificationwhen the connection is lostC. Set up an alarm with the Lost Network Connectivity trigger and configure an SNMP trap fornotification when the connection is lostD. Set up an alarm with the Lost Network Connectivity trigger to send an e-mail for notificationwhen the connection is lost


Options are :

  • C,A
  • C,D
  • C,B
  • B,D

Answer : C,D

While verifying host connectivity to datastores using Topology Maps, you see that one of the hostsin a DRS/HA Cluster is framed by a pale green circle. What does this indicate?


Options are :

  • The host has a CPU incompatibility
  • The host has a vMotion validation issue
  • The host is currently heavily utilized
  • The host currently has a low workload

Answer : The host is currently heavily utilized

Which of the following circumstances may cause a DRS cluster to become invalid (Choose Two)?A. Virtual machines have been powered on from a vSphere Client connected directly to an ESXihost.B. A migration on a VM is attempted while the VM is in the process of failing over.C. A reservation on a Parent Pool is reduced while a VM is in the process of failing over.D. An ESXi host in the cluster has been placed into Maintenance Mode.


Options are :

  • A,B
  • A,C
  • A,D
  • D,C

Answer : A,C

VCP-410 VMware Certified Professional on VSphere 4 Exam Set 7

During an attempt to create a new resource pool on an ESXi host residing in a DRS cluster, theNew Resource Pool selection appears to be unavailable.What could be the cause?


Options are :

  • The ESXi host had pools that were grafted into the DRS Cluster
  • VMware HA has not been enabled on the cluster.
  • Resource Pools cannot be created on ESXi hosts that are part of a DRS Cluster.
  • The cluster has too few resources to create a new resource pool.

Answer : Resource Pools cannot be created on ESXi hosts that are part of a DRS Cluster.

A DRS cluster with two ESXi hosts is set to Fully Automated mode. One host in the cluster isrunning at 98% CPU utilization, while the other host is running at 52% utilization. Upon analysis, itappears that none of the virtual machines are being migrated from the CPU constrained host, andno recommendations are being generated.Which of the following are the most likely causes of the problem (Choose Two)?A. The current DRS Migration Threshold setting is too conservative.B. Insufficient resources exist to perform vMotion migration operations.C. The constrained ESXi host has CPU features that are incompatible with other hosts in thecluster.D. The vMotion licenses for the cluster have expired.


Options are :

  • B,C
  • B,A
  • B,D
  • D,C

Answer : B,C

A request has been made to the SAN Administrator to provision a new LUN. A LUN (LUN 6) iscreated and the SAN administrator presents the LUN to an ESXi host using the storage array SANManagement software. After a Rescan operation on the ESXi host, the LUN fails to be recognizedby the host. Other LUNs from the same storage array are visible.Which of the following conditions would be most likely to cause the error described (Choose Two)?A. LUN masking on a range of LUNs is enabled on the ESX host, causing LUN 6 to be ignored.B. The HBA on the ESXi host has an active path that is shared with the service console.C. The LUN was not presented to the correct ESXi hostD. Zoning on the Fibre Channel switches is not configured correctly.


Options are :

  • A,C
  • A,B
  • A,D
  • D,C

Answer : A,C

VCP-410 VMware Certified Professional on VSphere 4 Exam Set 4

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions

Subscribe to See Videos

Subscribe to my Youtube channel for new videos : Subscribe Now