2V0-641 VMware Certified Professional 6 Network Virtual Exam Set 1

Which scenario can be configured to use 3DES encryption for virtual machine traffic? 


Options are :

  • Two virtual machines communicating across a layer 2 bridge.
  • Two virtual machines communicating across a point-to-point IPSec VPN connection. (Correct)
  • Two virtual machines running on different ESXi hosts communicating across the same logical switch.
  • Two virtual machines configured to use NSX Data Security.

Answer : Two virtual machines communicating across a point-to-point IPSec VPN connection.

VMware Certified Professional VCP6-DCV Practice Test Set 4

What is the maximum time span for viewing Flow Monitoring data?   


Options are :

  • 1 month
  • 2 weeks (Correct)
  • 1 week
  • 2 hours

Answer : 2 weeks

You have deployed a vShield Endpoint for antivirus and malware detection on an NSX network and need to monitor audit messages for the endpoint. Which log file are the audit messages recorded in? 


Options are :

  • messages.log on the NSX Manager
  • vmware.log on the virtual machine (Correct)
  • cloudnet_cpp.log on the NSX Controller
  • vmkwarning.log on the ESXi host

Answer : vmware.log on the virtual machine

An administrator can only log into the NSX manager using local credentials and not Active Directory credentials. Which option would cause this issue? 


Options are :

  • The NSX manager has not been connected to the lookup service (Correct)
  • The NSX manager has not been connected to Active Directory
  • The NSX manager has not been connected to an SSO server
  • The NSX manager has not been connected to the vCenter Server

Answer : The NSX manager has not been connected to the lookup service

VCPC610 VMware Certified Professional 6 Cloud Practice Test Set 4

An organization requires a high performance firewall as part of an NSX deployment. What is the minimum NSX Edge Services Gateway configuration that would be suitable for the organization's requirements?   


Options are :

  • Compact
  • X-Large
  • Quad-Large (Correct)
  • Large

Answer : Quad-Large

An administrator has deployed and powered on a new virtual machine configured to get its networking information via DHCP. The virtual machine is connected to an NSX network and connectivity has been verified. After reconfiguring the virtual machine with a static IP address, network connectivity is lost. Which statement explains what happened? 


Options are :

  • Spoof Guard is disabled
  • Spoof Guard is enabled and the operation mode is set to automatic (Correct)
  • Spoof Guard is enabled and the operation mode is set to manual
  • Spoof Guard is enabled but not configured

Answer : Spoof Guard is enabled and the operation mode is set to automatic

A vSphere cluster consists of three ESXi 5.5 hosts. Each host has five powered-on virtual machines. Which option will successfully configure the hosts to use a newly-created vSphere Distributed Switch (vDS) with a single port group? 


Options are :

  • Using the vSphere Web Client, select each of the running virtual machines and edit the settings of the network adapters.
  • Using the vSphere Web Client, for each host, select a host, right-click the host, select All vCenter Actions, and then select Add Networking.
  • Using the vSphere Web Client, for each host, select a host, click Manage, click Networking, and click the icon to Add host networking.
  • Using the vSphere Web Client, select the newly created VDS and click Add and Manage Hosts. (Correct)

Answer : Using the vSphere Web Client, select the newly created VDS and click Add and Manage Hosts.

VCP550D VMware Certified Professional 5 Data Center Exam Set 2

Which two web browsers are supported for programming the NSX REST API? (Choose two.) A. Internet Explorer B. Chrome C. Firefox D. Safari   


Options are :

  • A,B
  • A,D
  • C,D
  • B,C (Correct)

Answer : B,C

Which time frequency is not available when scheduling NSX backups? 


Options are :

  • Monthly (Correct)
  • Hourly
  • Daily
  • Weekly

Answer : Monthly

Where is the net-vdr command used?   


Options are :

  • ESXi host (Correct)
  • vSphere Management Assistant (vMA)
  • NSX Controller
  • NSX Edge

Answer : ESXi host

VCPC550 VMware Certified Professional Cloud Practice Test Set 11

How many Virtual IPs does the NSX Edge Load Balancer support? 


Options are :

  • 128
  • 1
  • 64 (Correct)
  • 32

Answer : 64

Which port must be available for communication between the NSX Manager and vCenter Server, ESXi hosts, and NSX appliances?   


Options are :

  • 443 (Correct)
  • 80
  • 22
  • 903

Answer : 443

Which two Virtual Private Networks are supported by the NSX Edge Service Gateway? (Choose two.) A. Layer 2 VPN B. GRE VPN C. IPSec VPN D. Layer 3 VPN   


Options are :

  • A,B
  • C,D
  • A,C (Correct)
  • B,D

Answer : A,C

VCP550D VMware Certified Professional 5 Data Center Exam Set 6

Which two statements describe the network connectivity provided by a vSphere Standard Switch (vSS)? (Choose two.) A. A vSS provides a direct and logical connection between a virtual machine NIC and a physical NIC. B. A vSS provides a direct and logical connection between two vSphere Distributed Switches C. A vSS connects the vNIC of a virtual machine to the physical network based on the bandwidth of the VM's configured network adapter. D. A vSS connects the vNIC of a virtual machine to the physical network and is not restricted to a specific bandwidth allocation based on the VM's configured network adapter. 


Options are :

  • A,B
  • C,D
  • B,C
  • A,D (Correct)

Answer : A,D

What is the appropriate source from which to deploy the VMware NSX Manager component? 


Options are :

  • MSI install package
  • VMware vSphere Update Manager update baseline
  • VMware Infrastructure Bundle (VIB) file
  • Open Virtualization Appliance (OVA) file (Correct)

Answer : Open Virtualization Appliance (OVA) file

Which component could be used to automate the deployment of an NSX environment?   


Options are :

  • The NSX Controller.
  • A Cloud Management Platform (CMP). (Correct)
  • The NSX Manager.
  • The vSphere Distributed Switch wizard.

Answer : A Cloud Management Platform (CMP).

VMware VDCD510 Advanced Professional Data Center Design Exam Set 2

You have a vSphere deployment consisting of ESXi 5.1 hosts and a vCenter Server 5.5. You are deploying NSX and begin by creating a vSphere Distributed Switch (vDS) on the vCenter Server using default settings. What is the next step in preparing the deployment for NSX? 


Options are :

  • Use the option Add host networking.
  • Use the option Add and Manage Hosts.
  • Deploy NSX on each host.
  • Upgrade the ESXi hosts. (Correct)

Answer : Upgrade the ESXi hosts.

You are managing three ESXi 5.1 hosts attached to a vSphere Distributed Switch (vDS) using the default settings. You need to provide LACP Active Mode connectivity for the two 10Gb uplinks of each host attached to the Uplink Port Group of the vDS. Using VMware best practices, which option shows the steps required to configure use of LACP? 


Options are :

  • Upgrade all ESXi hosts to ESXi version 5.5. Upgrade the existing vDS and use the Add and Manage Hosts option to migrate the hosts to the new vDS. Upgrade all virtual machines to hardware version 10. Configure the appropriate LACP settings.
  • Upgrade all ESXi hosts to ESXi version 5.5. Create a new version 5.5 vDS. Use the Add and Manage Hosts option to migrate the hosts to the new vDS. Configure the appropriate LACP settings.
  • Upgrade all ESXi hosts to ESXi version 5.5. Upgrade the existing vDS to version 5.5. Configure the appropriate LACP settings. (Correct)
  • Upgrade all ESXi hosts to ESXi version 5.5. Create a new version 5.5 vDS and use the Add and Manage Hosts option to migrate the hosts to the new vDS. Upgrade all virtual machines to hardware version 10. Configure the appropriate LACP settings.

Answer : Upgrade all ESXi hosts to ESXi version 5.5. Upgrade the existing vDS to version 5.5. Configure the appropriate LACP settings.

What is the default delay when the active NSX Edge instance fails before the standby instance takes the active role?   


Options are :

  • 6 seconds.
  • 45 seconds.
  • 3 seconds.
  • 15 seconds. (Correct)

Answer : 15 seconds.

VCPN610 VMware Certified Professional Network Virtual Test Set 5

Which routing protocol cannot be configured on an NSX edge device? 


Options are :

  • BGP
  • OSPF
  • IS-IS
  • EIGRP (Correct)

Answer : EIGRP

What is the frequency of the heartbeat between the active and standby NSX Edge instances when configured for HA?   


Options are :

  • Every 15 seconds.
  • Every 2 seconds.
  • Every 5 seconds
  • Every 1 second. (Correct)

Answer : Every 1 second.

A Distributed Router and an NSX Edge Gateway are connected to a Logical Switch with a VNI of 7321. Both also have connections to the external network. The Distributed Router serves as the default gateway for the virtual machines in VNI 7321. A vSphere administrator does not want to advertise the subnet in VNI 7321 to the rest of the network, but still wants to allow virtual machines in the segment to access external resources. What two steps should the vSphere administrator take to achieve this? (Choose two.) A. Make the NSX Edge Gateway the default gateway for VNI 7321. B. Configure a SNAT rule for VNI 7321 on the NSX Edge Gateway. C. Configure a static route to the NSX Edge Gateway in the upstream router. D. Create an inbound Access Control List on the Distributed Router.   


Options are :

  • A,B (Correct)
  • C,D
  • A,C
  • B,D

Answer : A,B

VCP-510 VMware Certified Professional on vSphere 5 Exam Set 1

What is a requirement of the physical network for VXLAN to operate correctly when deploying NSX for vSphere? 


Options are :

  • Multichassis Link Aggregation (MLAG) on the Top of Rack switches.
  • Configure Jumbo Frames. (Correct)
  • IPv4 enabled in the local segment where the VTEPs are connected.
  • Configure PIM in Sparse or Dense mode.

Answer : Configure Jumbo Frames.

Which two protocols are used to perform NSX backups? (Choose two.) A. FTP B. HTTP C. SFTP D. HTTPS   


Options are :

  • A,C (Correct)
  • B,D
  • A,B
  • C,D

Answer : A,C

Which feature is not supported by the vSphere 5.5 Distributed Switch? 


Options are :

  • IGMP snooping at layer 2 (Correct)
  • Multiple link aggregation groups
  • Packet captures at the uplink, virtual switch port, or vNIC
  • Differentiated Service Code Point (DSCP) QOS at layer3

Answer : IGMP snooping at layer 2

VCPVCD510 VMware Certified Professional 5 IaaS Exam Set 5

Which is the transport protocol and port number used in VMware's implementation of VXLAN in NSX for vSphere? 


Options are :

  • UDP, port number 8472 (Correct)
  • TCP, port number 4789
  • UDP, port number 4789
  • TCP, port number 8472

Answer : UDP, port number 8472

What is the maximum number of Distributed Router Logical Interfaces that can be connected to a Logical Switch?   


Options are :

  • 2000
  • 1200
  • 2
  • 1 (Correct)

Answer : 1

How many syslog servers can be configured for an NSX Edge device?   


Options are :

  • 3
  • 1
  • 2 (Correct)
  • 4

Answer : 2

VMware VDCD510 Advanced Professional Data Center Design Exam Set 4

Which two IPv6 connections are supported by the NSX Edge Load Balancer in Transparent mode? (Choose two.) A. IPv4 to IPv6 B. IPv6 to IPv6 C. IPv6 to IPv4 D. IPv4 to IPv4   


Options are :

  • A,B
  • B,C
  • C,D
  • A,D (Correct)

Answer : A,D

An organization has a vSphere environment configured with two adapters on each ESXi host. The physical network is configured to use Etherchannel. Based on the available options, what is the best option for load balancing traffic on the ESXi hosts? 


Options are :

  • Configure a vSS using the Route based on originating virtual port load balancing setting
  • Configure a vDS using the Route based on physical NIC load load balancing setting
  • Configure a vDS using the Route based on source MAC hash load balancing setting.
  • Configure a vSS using the Route based on IP hash. (Correct)

Answer : Configure a vSS using the Route based on IP hash.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions

Subscribe to See Videos

Subscribe to my Youtube channel for new videos : Subscribe Now