2V0-641 VMware Certified Professional 6 Network Exam Set 2

An administrator wishes to upgrade to NSX from the following infrastructure.• vCenter Server 4.1• vShield 5.0• ESXi hosts 4.1What is a valid, minimum set of steps to properly upgrade this environment to NSX?


Options are :

  • 1. Upgrade vCenter Server 4.1 to vCenter Server 5.5 2. Upgrade vShield 5.0 to vShield 5.5 3. Install the NSX upgrade bundle
  • 1. Upgrade vCenter Server 4.1 to vCenter Server 5.5 2. Upgrade ESXi hosts to ESXi 5.1 or greater 3. Install the NSX upgrade bundle
  • 1. Upgrade vCenter Server 4.1 to vCenter Server 5.1 2. Upgrade vCenter Server 5.1 to vCenter Server 5.5 3. Upgrade ESXi hosts to ESXi 5.1 or greater 4. Install the NSX upgrade bundle
  • 1. Upgrade vCenter Server 4.1 to vCenter Server 5.5 2. Upgrade vShield 5.0 to vShield 5.5 3. Upgrade ESXi hosts to ESXi 5.1 or greater 4. Install the NSX upgrade bundle (Correct)

Answer : 1. Upgrade vCenter Server 4.1 to vCenter Server 5.5 2. Upgrade vShield 5.0 to vShield 5.5 3. Upgrade ESXi hosts to ESXi 5.1 or greater 4. Install the NSX upgrade bundle

VMware VDCD510 Advanced Professional Data Center Design Exam Set 8

Which two characteristics of the underlying physical network does VMware NSX require for robustIP transport? (Choose two.)A.The physical network should provide scalable network I/O using Layer 2 Multipathing (L2MP) andMultichassis Link Aggregation (MLAG).B.The physical network should provide scalable network I/O using Equal Cost Multipathing (ECMP).C.QoS is not necessary since classification and marking will be done in the overlay.D.QoS classification and marking is required to provide end-to-end flow control


Options are :

  • b,c
  • c,d
  • a,b
  • b,d (Correct)

Answer : b,d

Which two statements describe the benefits provided by firewall services deployed by NSX?(Choose two.)A.Firewall services deployed using a software appliance will provide east-west traffic filtering andsecurity.B.Firewall services deployed using a distributed kernel module will provide east-west traffic filteringand security.C.Firewall services providing edge security services uses a virtual appliance and is centrallymanaged.D.Firewall services providing edge security services uses a distributed kernel module


Options are :

  • c,d
  • None
  • a,b
  • b,c (Correct)
  • a,c

Answer : b,c

What two statements correctly describe the way NSX provides integration with Cloud ManagementPlatforms (CMPs)? (Choose two.)A.OpenStack provides integration with the Cinder plug-in.B.OpenStack provides integration with the Neutron plug-in.C.VMware provides open source API plug-ins for their own CMP products such as vCD and vCAC.D.VMware provides out of the box integration with their own CMP products such as vCD and vCAC


Options are :

  • c,d
  • a,b
  • b,c
  • b,d (Correct)

Answer : b,d

VCPC610 VMware Certified Professional 6 Cloud Practice Test Set 2

A network security administrator wants to monitor traffic on several VLANs configured on avSphere Distributed Switch. The traffic will be sent to another distributed port.What type of port mirroring session must be configured to meet these requirements?



Options are :

  • Select the session type Remote Mirroring Destination when configuring the Port Mirroring session. (Correct)
  • Select the session type Distributed Port Mirroring (legacy) when configuring the Port Mirroring session.
  • Select the session type Remote Mirroring Source when configuring the Port Mirroring session.
  • Select the session type Distributed Port Mirroring when configuring the Port Mirroring session.

Answer : Select the session type Remote Mirroring Destination when configuring the Port Mirroring session.

Which three network policy settings can only be configured on a vSphere 5.5 Distributed Switch?(Choose three.)A.Access Control Lists (ACLs)B.Network I/O ControlC.LACP v2D.NetFlowE.DSCP Marking



Options are :

  • a,c,d
  • a,c,e (Correct)
  • b,c,e
  • c,d,e

Answer : a,c,e

Which NSX feature provides the ability to audit network traffic, define and refine firewall polices,and identify threats to the network?


Options are :

  • Logical Routers
  • Flow Monitoring (Correct)
  • ERSPAN
  • Service Composer

Answer : Flow Monitoring

VCPC550 VMware Certified Professional Cloud Practice Test Set 5

Which component provides for installation of NSX hypervisor kernel components and user worldagents?


Options are :

  • NSX Edge Virtual Appliance
  • vCloud Automation Center
  • NSX Controller
  • NSX Manager (Correct)

Answer : NSX Manager

An administrator has recently deployed NSX, but is still using a pair of physical network securitydevices. The administrator wants to use the physical security devices to filter virtual machine traffichosted in the overlay network.Which NSX component will provide the connectivity between the overlay and the physicalnetwork?


Options are :

  • NSX Controller
  • Distributed Firewall
  • Logical Router (Correct)
  • Edge Services Gateway

Answer : Logical Router

Which two statements are true regarding NSX? (Choose two.)A.Workloads can be placed and moved independently of physical topology.B.Operational efficiency can be achieved through automation of the physical network.C.Workload deployments are non-disruptive over the existing physical network.D.NSX implementation requires a VMware vSphere environment


Options are :

  • a,b
  • c,d
  • a,c (Correct)
  • b,c

Answer : a,c

VCPVCD510 VMware Certified Professional 5 IAAS Practice Exam Set 5

What are two valid methods of configuring virtual machines to use a vSphere Distributed Switch(vDS) that are currently using a vSphere Standard Switch (vSS)? (Choose two.)A.Select each virtual machine and drag it to the vSphere Distributed Switch.B.Select the vSS in use by the virtual machines and select the Move to option on the right-clickmenu.C.Select each virtual machine and edit the virtual network adapter's connection settings.D.Use the Migrate Virtual Machine Networking option from the right-click menu of the vDS.


Options are :

  • a,d
  • c,d (Correct)
  • b,c
  • a,d

Answer : c,d

Which statement best describes scaling a fault tolerant spine-leaf multipathing fabric architectedfor an NSX deployment?


Options are :

  • Scaling should be performed by increasing the number of links from each leaf switch to the associated spine switches in the architecture.
  • Scaling should be performed by replacing 1Gbps links in the architecture with 10Gbps links.
  • Scaling should be performed by using layer 2 switching between the leaf and spine switches.
  • Scaling should be performed by increasing the number of spine switches while maintaining pointto- point connectivity between leafs and spines. (Correct)

Answer : Scaling should be performed by increasing the number of spine switches while maintaining pointto- point connectivity between leafs and spines.

On a vSphere Standard Switch, how does teaming two or more physical network adapters provideload balancing when using the Load Balancing feature Route based on the originating virtual portID?




Options are :

  • The physical network adapter is chosen by using the source IP address of the virtual machine and the destination IP address as variables in an algorithm.
  • The physical network adapter is chosen by using the source MAC address as a variable in an algorithm
  • They physical network adapter is chosen by use of a round robin based algorithm for each additional virtual port in the port group that becomes active. (Correct)
  • The physical network adapter is chosen based on the workloads from each port and the number of physical adapters

Answer : They physical network adapter is chosen by use of a round robin based algorithm for each additional virtual port in the port group that becomes active.

VCPC610 VMware Certified Professional 6 Cloud Practice Test Set 2

Which statement describes proper packet processing of layer 3 traffic in an NSX for vSpheretopology?


Options are :

  • All packets requiring routing are processed by performing a lookup in the Logical Router Control VM and then forwarded
  • Only packets requiring routing to another VM on a different host are processed by the distributed router. Other packets are processed by the Logical Router Control VM.
  • All packets are processed by the distributed router. No packets are processed by the Logical Router Control VM. (Correct)
  • Only packets requiring routing to another VM on the same host are processed by the distributed router. Other packets are processed by the Logical Router Control VM.

Answer : All packets are processed by the distributed router. No packets are processed by the Logical Router Control VM.

Which NSX service or feature provides optimized management of virtual machine broadcast(ARP) traffic?


Options are :

  • NSX Controller (Correct)
  • Edge Services Gateway
  • VTEP
  • NSX Manager

Answer : NSX Controller

What are two advantages for using NSX for vSphere's Logical Switching? (Choose two.)A.Expands the number of available VLANs.B.Allows for Layer 2 switching over Layer 3 infrastructure.C.Distributes Layer 3 data across multiple hypervisorsD.Provides for 10,000 logical segments


Options are :

  • b,d (Correct)
  • a,b
  • c,d
  • a,d

Answer : b,d

VMware Certified Professional VCP6-DCV Practice Test Set 2

How does NSX simplify physical network design?


Options are :

  • VLANs are moved into the virtual network for virtual machine traffic, eliminating the need to use Private VLANs on the physical network
  • Network administrators only need to configure routing on the physical network for virtual machine traffic since all other network functions are moved to the virtual network
  • Virtual network integration can make changes to the physical network programmatically using REST API calls which automates network changes and increases agility.
  • Transport zones are created in the virtual network for virtual machine traffic, removing the need to make changes to the physical network. (Correct)

Answer : Transport zones are created in the virtual network for virtual machine traffic, removing the need to make changes to the physical network.

You are tasked with designing a data center architecture that should maximize the use of vMotionwithin your environment. You must use these VMware best practices:• The network must utilize widely offered layer 2 switching and layer 3 switching services• Purchase of new equipment should be minimizedWhich two network design architectures will provide the requirements for vMotion in your datacenter? (Choose two.)A.Utilize layer 3 switching from the access layer through the core.B.Employ layer 2 multipathing using a standardized protocol.C.Deploy a flat, traditional layer 2 switched network.D.Deploy an overlay technology for the deployment of your virtual network


Options are :

  • c,d
  • a,d (Correct)
  • a,b
  • b,c

Answer : a,d

Using VMware's best practices, choose two statements that define the best solution for scalinglayer 2 services for the virtual network. (Choose two.)A.Employ a layer 2 switched network.B.Employ a layer 3 switched network.C.Use GRE for an overlay network.D.Use VXLAN for an overlay network


Options are :

  • b,d (Correct)
  • b,c
  • a,c
  • a,b

Answer : b,d

VMware Certified Professional VCP6-DCV Practice Test Set 4

Layer 2 Multipathing (L2MP) and Multi-chassis Etherchannel (MEC) features have distinct scalingdifferences with the network switching and routing services provided by NSX.Which two statements provide a proper contrast of these services? (Choose two.)A.Multi-chassis Etherchannel features provide higher utilization of Ethernet links within a definedL2/L3 distribution area.B.Multi-Chassis Etherchannel features provide an easy ability to scale a VLAN across the datacenter.C.NSX provides a method to transparently deploy L2MP protocols upon existing data centerinstallations without service disruption.D.NSX provides a method to deploy scalable L2/L3 services on existing data center installations.


Options are :

  • a,d (Correct)
  • b,c
  • c,d
  • c,d

Answer : a,d

In a data center using a leaf and spine architecture, which two statements define the connectivitybetween the leaf and spine tiers required to provide optimal network connectivity for NSX?(Choose two.)A.Links are required between leaf and spine switches, and from each spine switch to other spineswitches in the architecture.B.Links are required between leaf and spine switches in the architecture to form a point-to-pointconnection between the two tiers.C.High availability and scalability should be achieved using NSX High Availability.D.High availability and scalability should be achieved using Equal Cost Multipathing (ECMP).


Options are :

  • b,d (Correct)
  • a,b
  • b,c
  • c,d

Answer : b,d

Which two statements are valid regarding vCloud Networking and Security (vCNS) and NSX?(Choose two.)A.Both vCNS and NSX support multiple hypervisor environments.B.NSX provides support for multiple hypervisor environments, vCNS does not.C.Both vCNS and NSX support dynamic routing protocols.D.NSX supports dynamic routing protocols, vCNS does not.


Options are :

  • b,d (Correct)
  • c,d
  • a,b
  • b,c

Answer : b,d

VCP550D VMware Certified Professional 5 Data Center Exam Set 4

You have deployed a two-tiered application using four virtual machines:• Two virtual machines are web application servers• Two virtual machines providing a clustered database serviceWhat feature can you configure to provide the most accurate account for only the traffic betweenthe web servers and the clustered database?


Options are :

  • On the vSphere Distributed Switch, configure the use of a port mirroring session using the Remote Mirroring Destination session type.
  • On the vSphere Distributed Switch, configure Netflow for the distributed virtual port group and enable Process internal flows only for the distributed switch (Correct)
  • On the vSphere Distributed Switch, configure the use of a port mirroring session using the Encapsulated Remote Mirroring (L3) Source session type.
  • On the vSphere Distributed Switch, configure the use of an Isolated Private VLAN for the ports of the four virtual machines.

Answer : On the vSphere Distributed Switch, configure Netflow for the distributed virtual port group and enable Process internal flows only for the distributed switch

Which statement is true regarding deploying NSX over a physical network?


Options are :

  • VLANs are not required to separate traffic between virtual machines.
  • NSX can implement IPv6 on an IPv4 physical network. (Correct)
  • Routing is supported on bridged interfaces.
  • OSPF can be used for Management traffic in a Layer 3 fabric design.

Answer : NSX can implement IPv6 on an IPv4 physical network.

How does NSX simplify the underlying physical network?


Options are :

  • All configuration and state information is cached by the NSX controllers, reducing the number of MAC/ARP table entries on the physical network.
  • All configuration and state information is stored in the local NSX BPDU database, eliminating the need for Spanning Tree Protocol (STP) on the physical network
  • All configuration and state information is available via the REST APIs to automate the configuration of the physical network
  • All configuration and state information are readily accessible, as is the mapping between virtual network topologies and the physical network (Correct)

Answer : All configuration and state information are readily accessible, as is the mapping between virtual network topologies and the physical network

VCAD510 VMware Certified Associate Data Center Virtual Test Set 1

What are three switch features found only on vSphere Distributed Switches? (Choose three.)A.Network I/O ControlB.CDPC.LLDPD.SR-IOVE.Port Mirroring


Options are :

  • a,b,e
  • a,c,e (Correct)
  • c,d,e
  • b,c,e

Answer : a,c,e

Which two are valid statements regarding third-party services and NSX? (Choose two.)A.Third party services are automatically registered with NSX Manager.B.Third party services can either be automatically or manually registered with NSX Manager.C.Third party services require the deployment of a virtual appliance.D.Third party services may or may not utilize a service virtual appliance.


Options are :

  • c,d
  • b,d (Correct)
  • a,b
  • b,c

Answer : b,d

If unicast mode is configured for the overlay transport in an NSX deployment, which twostatements correctly define the network support that is required? (Choose two.)A.Configure NSX High Availability.B.Layer 2 switching support in the access and distribution layersC.Layer 3 switching support in the access and distribution layersD.Configure Jumbo Frame support


Options are :

  • a,b
  • b,c
  • c,d
  • c,d (Correct)

Answer : c,d

VCPVCD510 VMware Certified Professional 5 IAAS Practice Exam Set 1

Where must you go to manually register a third-party service with VMware NSX?


Options are :

  • vSphere Web Client -> Networking & Security -> Service Definitions (Correct)
  • vSphere Web Client -> Networking & Security -> Distributed Firewall -> Service Definitions
  • vSphere Web Client -> Networking & Security -> Service Composer -> Service Deployments tab
  • vSphere Web Client -> Networking & Security -> Installation -> Service Deployments tab

Answer : vSphere Web Client -> Networking & Security -> Service Definitions

Which VMware NSX for vSphere component can be created on-demand using vCloud AutomationCenter?


Options are :

  • The logical distributed router
  • The NSX Edge Services Gateway
  • The distributed firewall
  • The logical switch (Correct)

Answer : The logical switch

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions