2V0-620 VMware VSphere 6 Foundations Practice Exam Set 2

An administrator is given a bash script that retrieves data for ESXi 6.x host configurations. This data needs to be collected right after the installation of a host and must be run directly on the host.  Which two actions can be used to run this script on an ESXi host? (Choose two.)  


A. Connect to the host with Ruby vSphere Console and run the script from there. 
B. Enable SSH access from the Direct Console User Interface. 
C. Enable the ESXi Shell from the Direct Console User Interface. 
D. Run the script directly from the vSphere Web Client. 
 


Options are :

  • A,D
  • A,B
  • B,C (Correct)
  • A,C

Answer : B,C

VCPVCD510 VMware Certified Professional 5 IaaS Exam Set 3

An administrator is configuring the Maximum Transmission Unit value on a vSphere Distributed Switch.  Which two options are typical values for ESXi networking? (Choose two.)   
A. 1492 
B. 1500 
C. 9000 
D. 9089  


Options are :

  • A,C
  • A,D
  • A,B
  • B,C (Correct)

Answer : B,C

What is the effective vSphere licensing level during the 60 day evaluation period?  


Options are :

  • vSphere Foundation Essentials Plus
  • vSphere Enterprise
  • vSphere Standard
  • vSphere Enterprise Plus (Correct)

Answer : vSphere Enterprise Plus

How are ports scaled on vSphere Standard Switches (vSS)?  


Options are :

  • Ports on a vSS can only be dynamically scaled up
  • Ports on a vSS can only be dynamically scaled down.
  • Ports on a vSS can be dynamically scaled up and down. (Correct)
  • Ports on a vSS can only be statically scaled up or down.

Answer : Ports on a vSS can be dynamically scaled up and down.

VCPVCD510 VMware Certified Professional 5 IaaS Exam Set 1

During a new vSphere Distributed Switch configuration, where does the Maximum Transmission Unit (MTU) value get modified?  


Options are :

  • Switch Settings (Correct)
  • NIC Teaming Settings
  • Uplink Settings
  • Portgroup Settings

Answer : Switch Settings

An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? 


Options are :

  • vSphere WebClient
  • vSphere Client
  • RVC console
  • Direct Console User Interface (Correct)

Answer : Direct Console User Interface

An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?  


Options are :

  • The network is automatically configured by DHCP (Correct)
  • The network is configured by Automatic Private IP Addressing (APIPA).
  • The network is configured based on the settings detected in DNS.
  • The network is configured with the address as specified in the installer.

Answer : The network is automatically configured by DHCP

VCP-410 VMware Certified Professional on VSphere 4 Exam Set 16

An administrator deploys vCenter Server using the embedded Platform Services Controller. After testing the deployment for a couple of months, it is determined that the environment would be better served with an external Platform Services Controller.  What should the administrator do to meet this new requirement?  


Options are :

  • Migrate the embedded Platform Services Controller to an external Platform Services Controller.
  • Perform a fresh install of an external Platform Services Controller.
  • Upgrade the embedded Platform Services Controller to an external Platform Services Controller. (Correct)
  • Deploy a fresh instance of vCenter Server with an external Platform Services Controller.

Answer : Upgrade the embedded Platform Services Controller to an external Platform Services Controller.

Which three items should be validated prior to installing ESXi 6.x? (Choose three.)  A. Remote Storage has been disconnected. 
B. Installation media is available. 
C. Server hardware clock is set to UTC. 
D. Storage has beenpartitioned with a VMFS volume. 
E. Network cards have been setup to use Jumbo Frames.  


Options are :

  • B,C,D
  • A,D,B
  • A,C,B
  • A,B,C (Correct)

Answer : A,B,C

In order for a company to meet regulatory requirements, all ESXi 6.x Hosts must be configured to direct logs to a syslog server.    What are two ways ESXi hosts can configured for this action? (Choose two)  
A. Use the esxcli system syslog command. 
B. Edit them in the ESXi host Advanced System Settings.  
C. From the Syslog collector user interface of the Web Client. 
D. Syslog logging is not available for ESXi Hosts.  


Options are :

  • A,C
  • B,C
  • A,B (Correct)
  • A,D

Answer : A,B

VCP-410 VMware Certified Professional on VSphere 4 Exam Set 11

Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x? 


Options are :

  • Route based on the originating virtual port
  • Route based on Source MAC Hash
  • Route based on physical NIC workload (Correct)
  • Route based on IPHash

Answer : Route based on physical NIC workload

What are two benefits of using NFS 4.1 with vSphere 6.x as compared to NFS 3? (Choose two.)  A. NFS 4.1 supports Kerberos Authentication 
B. NFS 4.1 supports multipathing 
C. NFS 4.1 supports IPv6 
D. NFS 4.1 supports hardware acceleration


Options are :

  • A,B (Correct)
  • B,C
  • A,D
  • A,C

Answer : A,B

What is true regarding datastores on ESXi 6.x? 


Options are :

  • NFS datastore can be mounted using NFS 4.1 on one ESXi host andNFS 3.0 on another
  • Both VMFS3 and VMFS5 datastores can be created
  • NFS 4.1 datastore does not support Fault Tolerance (FT) (Correct)
  • NFS 3.0 datastore does not support Fault Tolerance (FT)

Answer : NFS 4.1 datastore does not support Fault Tolerance (FT)

VMware VDCD510 Advanced Professional Data Center Design Exam Set 2

By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority? 


Options are :

  • RedHatCertificate Authority
  • DigiCert Certificate Authority
  • Verisign Certificate Authority
  • VMware Certificate Authority (Correct)
  • None of the above

Answer : VMware Certificate Authority

Which vSphere 6 Standard Edition feature will allow an organization to ensure that critical multithreaded applications have the maximum possible uptime? 


Options are :

  • App HA
  • Fault Tolerance
  • High Availability (Correct)
  • Distributed Resource Scheduler

Answer : High Availability

Which three traffic types are available services options when configuring a vmkernel port? (Choose three.) A.Provisioning Traffic 
B. Virtual Volumes Traffic 
C. vSphere Replication NFC Traffic 
D. Virtual SAN Traffic 
E. FCoE Traffic



Options are :

  • A,D,B
  • A,C,D (Correct)
  • A,B,C
  • A,C,B

Answer : A,C,D

VMware VDCD510 Advanced Professional Data Center Design Exam Set 8

An administrator has just configured the IP address on an ESXi host from the Direct Console User Interface.     How can the configuration be validated as correct without any additional tools?  


Options are :

  • Add the host to vCenter Server and if it works, then all networking settings are ok.
  • Select the Test Management Network option from the DCUI. (Correct)
  • Connect to the host with the vSphere Client and click the Test Network option.
  • Use PowerCLI to connect to the host and initiate a network test.

Answer : Select the Test Management Network option from the DCUI.

What is the default load balancing policy for a newly created VMkernel port on a vSphere Distributed Switch?  


Options are :

  • Route based on source mac address
  • Route based on originating virtual port ID (Correct)
  • Route based on physical NIC load
  • Route based on IP Hash

Answer : Route based on originating virtual port ID

Which two actions allow for the disabling of Network Rollback operations? (Choose two.)  A. Modifying the vpxd advanced configuration options and adding the config.vpxd.network.rollback key 
B. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the<rollback> xml tag 
C. Modifying theC:\ProgramData\VMware\CIS\cfg\vmware-vpx\vpxd.cfg file and adjusting the <networkrollback> xml tag 
D. Modifying the C:\ProgramData\VMware\CIS\cfg\vmware-vpx\firstboot\vpxd-service-spec.prop file and adjusting the <rollback> xml tag


Options are :

  • A,D
  • B,C
  • A,B (Correct)
  • A,C

Answer : A,B

VMware VDCD510 Advanced Professional Data Center Design Exam Set 4

After installation of a host in your test environment, you need to move it to production.  The only major change that needs to be made is that the hostname of the server needs to change.      
What are two ways that an administrator can change the host name without editing configuration files on the host directly? (Choose two.)  
A. Login to the Direct Console User Interface and change it from here. 
B. Edit the Default TCP/IP Configuration from the vSphere Web Client. 
C. Use the Ruby vSphere Client to send a script to the ESXi host that updates the hostname. 
D. Update the information in DNS and the ESXi host will automatically update with these changes.  



Options are :

  • A,B (Correct)
  • A,C
  • B,D
  • A,D

Answer : A,B

An administrator needs to add an object to an existing vApp using the vSphere Web Client. How is this accomplished?  A. Create an Object Inside the vApp. 
B. Add an Object to a vApp. 
C. Add an Object to the Datastore the vApp is located in. 
D. Move all Objects to a new Datastore folder. 


Options are :

  • A,C
  • A,B (Correct)
  • A,D
  • B,C

Answer : A,B

VCPVCD510 VMware Certified Professional 5 IaaS Exam Set 3

What is true about resource pools created on a Distributed Resource Scheduler (DRS) cluster? 


Options are :

  • A root resource pool is not needed when creating resource pools on a DRS cluster.
  • A root resource pool is automaticallycreated using the aggregate total of all resources in the datacenter.
  • A root resource pool is automatically created using the aggregate total of the ESXi host resources in the cluster (Correct)
  • A root resource pool is created with the specified values.

Answer : A root resource pool is automatically created using the aggregate total of the ESXi host resources in the cluster

What are three goals of resource management within a cluster? (Choose three.)  A. To prevent virtual machines from monopolizing resources and to guarantee predictable service rates. 
B. To exploitundercommitted resources and overcommit with graceful degradation. 
C. To provide solutions to potential problems that you might encounter when using vCenter Server. 
D. To control the relative importance of virtual machines and provide flexible dynamic partitioning. 
E. To provide additional network administration capabilities.  


Options are :

  • A,D,B
  • A,B,C
  • A,C,D
  • A,B,D (Correct)

Answer : A,B,D

An administrator enables High Availability (HA) on a Virtual SAN cluster.     Which network is used for HA Network Heartbeat configuration?  


Options are :

  • The vMotion network.
  • The Virtual SAN network. (Correct)
  • The Management network.
  • The Provisioning Traffic network.

Answer : The Virtual SAN network.

VMware Certified Professional VCP6-DCV Practice Test Set 4

An administrator is cloning and configuring five new web server virtual machines.  What would be the benefit of configuring resource shares for the new VMs?  


Options are :

  • To prioritize access to a resource before contention occurs.
  • To prioritize access to a resource during contention. (Correct)
  • To guarantee access to a resource during contention.
  • To guarantee access to a resource before contentionoccurs.

Answer : To prioritize access to a resource during contention.

An administrator wants to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task?


Options are :

  • Enable IP pools. (Correct)
  • Enable NAT on the vApp router.
  • Configure the guest OS for workgroup and WINS.
  • Configure a local DHCP serverin the vApp.

Answer : Enable IP pools.

Which two options would allow a database administrator, with no access to the vSphere infrastructure, to connect to a virtual machine? (Choose two.)  A. Use the Virtual Machine Remote Console (VMRC). 
B. Use Remote Desktop Protocol (RDP) to connect. 
C. Ask the vSphere administrator to grant permission to access the console through vCenter Server. 
D. Ask the vSphere administrator to grant permission toaccess with the Horizon View Direct Connect Client. 


Options are :

  • A,D
  • B,C (Correct)
  • A,B
  • A,C

Answer : B,C

VMware VDCD510 Advanced Professional Data Center Design Exam Set 4

A vApp template recently added to a Content Library is not displayed. Which two actions could correct this problem? (Choose two.)  A. Manually synchronize the library
B. Select the Download all library content immediately option 
C. Select the Sync subscribed library option  
D. Manually download the vApp template 


Options are :

  • B,C
  • A,D
  • A,B (Correct)
  • A,C

Answer : A,B

An administrator creates a DRS cluster of eight ESXi 6.x hosts. There are 10 virtual machines balanced across the hosts. An attempt to place the first host into maintenance mode fails.       What are two reasons that the host failed to enter maintenance mode? (Choose two.)  
A. The DRS cluster Automation Level is set to Partially Automated mode. 
B. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Should run on hosts in group. 
C. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Must run on hosts in group. 
D. One of the virtual machines on the ESXi Host entering maintenance mode is configured with an individual Automation Level set to Partially Automated. 


Options are :

  • A,C
  • A,D (Correct)
  • B,C
  • A,B

Answer : A,D

Which three operations occur during a cold migration of a virtual machine? (Choose three.)  A. The virtual machine disks are moved if the datastore is being changed. 
B. The virtual machine is registered with the destination server. 
C. The source virtual machine is removed from the old hosts. 
D. The virtual machine hardware is upgraded. 
E. The virtual machine files are quiesced prior to the migration.


Options are :

  • A,B,D
  • A,B,C (Correct)
  • A,C,B
  • B,C,A

Answer : A,B,C

VMware Certified Professional VCP6-DCV Practice Test Set 2

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions

Subscribe to See Videos

Subscribe to my Youtube channel for new videos : Subscribe Now