Tibco TB0-120 Enterprise Message Service 6 Practice Exam Set 1

Which two statements are true about SSL support in EMS? (Choose two.)


Options are :

  • If the producer uses SSL to connect to the EMS server, the consumer must also use SSL.
  • When authorization is enabled, username and passwords are not checked on SSL connections
  • Secure communications will occur between an EMS client and EMS server
  • Secure communications will occur between the Administration Tool and EMS server.

Answer : Secure communications will occur between an EMS client and EMS server Secure communications will occur between the Administration Tool and EMS server.

TIBCO Enterprise Message Service Certification Exam Set 1

Which two statements are true about writing a LoginModule, which implements a JAAS interface? (Choose two.)


Options are :

  • The LoginModule must accept the password from the EMS server byway of a callback
  • The LoginModule must use SSL.
  • The LoginModule must be named JAASLoginModule
  • The LoginModule must be thread-safe.

Answer : The LoginModule must accept the password from the EMS server byway of a callback The LoginModule must be thread-safe.

If authorization is enabled in the tibemsd.conf file and the secure property is set for a destination, when are permissions checked? (Choose two.)


Options are :

  • When creating non-durable subscription for wildcard topics
  • When attempting to become a consumer for a queue
  • When performing a JNDI lookup of a destination
  • When a producer sends a message to the destination

Answer : When attempting to become a consumer for a queue When a producer sends a message to the destination

Two EMS servers have an active/active route between them. How many connections are used to route messages bi-directionally between them?


Options are :

  • 4
  • 1
  • 0
  • 2

Answer : 1

Tibco TB0-120 Enterprise Message Service 6 Practice Exam Set 3

Which two statements are true about the transactional abilities of TIBCO EMS? (Choose two.)


Options are :

  • EMS can serve as a JTA compliant transaction manager.
  • EMS does not support transactional consumers on routed queues.
  • EMS can integrate with JTA compliant transaction managers.
  • EMS only supports non-XA transactions.

Answer : EMS does not support transactional consumers on routed queues. EMS can integrate with JTA compliant transaction managers.

Which Administration Tool command creates the queue without reporting any errors?


Options are :

  • Create queue test.queue store=$sys.failsafe, secure,local
  • Create queue test.queue secure,store=$sys.failsafe,channel=multicast-l
  • Create queue test.queue secure,global,store=Ssys.failsafe
  • Create queue test.queue store=$sys.failsafe,trace=header

Answer : Create queue test.queue secure,global,store=Ssys.failsafe

Which four parameters must be set in EMS configuration files to enable the database store feature in the tibemsd.conf? (Choose four.)


Options are :

  • dbstore driver dialect
  • dbsto re_driver_password
  • dbstore_classpath
  • jre_library
  • dbstore_library_pass-word

Answer : dbsto re_driver_password dbstore_library_pass-word

TIBCO TB0 -123 Active Matrix Business Works 5 Practice Exam Set 2

What are three valid delivery modes in EMS? (Choose three.)


Options are :

  • NON PERSISTENT
  • GUARANTEED
  • RELIABLE_DELIVERY
  • TRANSACTIONAL
  • PERSISTENT

Answer : NON PERSISTENT RELIABLE_DELIVERY PERSISTENT

Which two parameters apply to mstore only? (Choose two.)


Options are :

  • scan_iter_interval
  • scan_target_interval
  • mstore_file
  • file truncate

Answer : scan_iter_interval scan_target_interval

Which three steps should be taken to avoid losing routed topic messages? (Choose three)


Options are :

  • Send persistent messages
  • Use durable subscribers instead of non-durable subscribers
  • Use fault-tolerant format urls to configure routes
  • Create active-active routes
  • Create active-passive routes

Answer : Send persistent messages Use durable subscribers instead of non-durable subscribers Create active-active routes

TIBCO Enterprise Message Service Certification Exam Set 1

Which two statements are true about hops and zones in EMS? (Choose two.)


Options are :

  • Zones affect queue and topic messages.
  • A server can simultaneously belong to more than one zone.
  • The concept of zones and hops applies to queue messages.
  • Topic messages can be routed across multiple hops if there are no cycles

Answer : A server can simultaneously belong to more than one zone. Topic messages can be routed across multiple hops if there are no cycles

Which method is used to register the message listener with the message consumer for asynchronous message consumption?


Options are :

  • putMessageListener ()
  • onMessage ()
  • setListener ()
  • setMessageListener ()

Answer : setMessageListener ()

Which Administration Tool command sets the maximum size of a queue?


Options are :

  • Create queue queue.manage mbytes = value[KB|MB|GB]
  • Create queue queue.manage maxbytes = value[KB|MB|GB]
  • Create queue queue.manage msgm = value[KB|MB|GB]
  • Create queue queue.manage size = value[KB|MB|GB]

Answer : Create queue queue.manage size = value[KB|MB|GB]

TIBCO TB0-120 Enterprise Message Service TM 6 Practice Exam Set 3

Which two statements are true about topics and queues? (Choose two.)


Options are :

  • A sender can send to a wildcard queue.
  • A publisher can publish to a wildcard topic.
  • A consumer can listen for wildcard topic names.
  • A queue can only have one consumer per message
  • A queue can only have one exclusive connected consumer at a time.

Answer : A consumer can listen for wildcard topic names. A queue can only have one consumer per message

Which statement is true when clients send messages to EMS servers using RELIABLE_DELIVERY mode?


Options are :

  • The publish call succeeds unless a non-durable consumer is offline.
  • The publish call gets confirmation if the destination exists
  • The publish call waits for the server message indicating receipt confirmation
  • The publish call succeeds unless the EMS server connection has terminated.

Answer : The publish call succeeds unless the EMS server connection has terminated.

Which three entries are valid in the aci.conf file? (Choose three.)


Options are :

  • TOPIC=foo GROUP=groupl PERM=view-destinations
  • ADMIN user=user4 PERM=view-durable
  • ADMIN USER=user3 PERM=view-factories
  • ADMIN USER=userl PERM=all
  • TOPIC=foo USER=user2 PERM=publish

Answer : ADMIN user=user4 PERM=view-durable ADMIN USER=userl PERM=all TOPIC=foo USER=user2 PERM=publish

TIBCO TB0-120 Enterprise Message Service TM 6 Practice Exam Set 3

Which two statements are true about EMS tracing and logging capabilities? (Choose two.)


Options are :

  • Message tracing can be applied at destination and message levels.
  • The location of log file is set in tibemsd.conf file via the log_trace parameter
  • Message tracing applies only to headers.
  • Access control violations can be logged to console or log file

Answer : Message tracing can be applied at destination and message levels. Access control violations can be logged to console or log file

Which two statements are true about fault-tolerant pairs of EMS servers? (Choose two.)


Options are :

  • The passive server does not need to specify an ft_active value,
  • The standby server sends heartbeats to the active server.
  • The active server sends heartbeats to the standby server
  • Both servers need to point to each other using their ft_active parameters,

Answer : The active server sends heartbeats to the standby server Both servers need to point to each other using their ft_active parameters,

Producer A has published a message with expiration time as 30 seconds to a queue with the property JMS_TIBCO_PRESERVE_UNDELIVERED set to true.What happens when the message expires?


Options are :

  • The message is deleted from the undelivered queue.
  • The message is moved to Ssys.expired queue
  • The message is moved to Ssys.undelivered queue
  • The message is completely deleted from the server

Answer : The message is moved to Ssys.undelivered queue

TIBCO Enterprise Message Service Certification Exam Set 1

What are four valid EMS Administration Tool commands? (Choose four.)


Options are :

  • setprop
  • show server
  • updateprop
  • show config
  • addprop

Answer : setprop show server show config addprop

Which method can be used to create custom authorization login modules?


Options are :

  • JACI
  • NTML
  • JAAS
  • WS-*

Answer : JAAS

Tibco TB0-120 Enterprise Message Service 6 Practice Exam Set 2

What are three valid acknowledgment modes in TIBCO Enterprise Message Service? (Choose three.)


Options are :

  • EXPLICIT_CLIENT_ACKNOWLEDGE
  • NO_ACKNOWLEDGE
  • IMPLICIT_CLIENT_DUPS_OK_ACKNOWLEDGE
  • DUPS_OK_ACKNOWLEDGE
  • IMPLICIT_CLIENT_ACKNOWLDEGE

Answer : EXPLICIT_CLIENT_ACKNOWLEDGE NO_ACKNOWLEDGE DUPS_OK_ACKNOWLEDGE

Which two are valid acknowledgment modes in TIBCO Enterprise Message Service? (Choose two.)


Options are :

  • AUTO_ACKNOWLEDGE
  • TRANSACTIONAL
  • ACKNOWLEDGE_ALL
  • ACK_PRODUCER
  • CLIENT_ACKNOWLEDGE

Answer : TRANSACTIONAL ACK_PRODUCER

There is a non-fault tolerant EMS server running on a host named SERVER_A. There are two other EMS servers running on the hosts FT_PRIM and FT_BACK configured as a faulttolerant pair using shared state. FT_PRIM runs the primary EMS server and FT_BACK runs the backup EMS server.Which two statements are true about these servers? (Choose two.)


Options are :

  • The network hostnames must be the same
  • The SERVER_A EMS server can create a route to the fault-tolerant pair
  • The EMS server names (in tibemd.conf) must be the same on host FT_PRIM and FT_BACK.
  • The SERVER_A EMS server can only create a route to the EMS server running on the primary server FT_PRIM.

Answer : The SERVER_A EMS server can create a route to the fault-tolerant pair The EMS server names (in tibemd.conf) must be the same on host FT_PRIM and FT_BACK.

TIBCO TB0-115 Active Structure Oriented Matrix Practice Exam Set 2

Which three are valid JMS Message types? (Choosethree.)


Options are :

  • Text Message
  • SOAP Message
  • Map Message
  • XML Message
  • Object Message

Answer : Text Message Map Message Object Message

Which two message types are available in EMS? (Choose two)


Options are :

  • SOAPMessage
  • XMLMessage
  • StreamMessage
  • MapMessage

Answer : SOAPMessage XMLMessage

Which server parameter in the tibemsd. conf file allows confirmation of NON_PERSISTENT messages to the producer when authorization is disabled in the server?


Options are :

  • confirm ok
  • compliant_ack_check
  • npsend_check_mode
  • non persistent

Answer : npsend_check_mode

TIBCO TB0-115 Active Structure Oriented Matrix Practice Exam Set 4

Which Context.PROVDER_URL is used to look up EMS administered objects stored in the EMS server running on host EMSHOST on port 7222?


Options are :

  • tibjmsnaming://EMSHOST:7222
  • emsnaming://EMSHOST:7222
  • ems://EMSHOST:7222
  • jndi://EMSHOST:7222

Answer : jndi://EMSHOST:7222

What are three limitations in the use of wildcards by EMS clients? (Choose three.)


Options are :

  • Clients cannot use wildcards for dynamic topics
  • Clients cannot publish to wildcard topics
  • Clients cannot receive from wildcard queues.
  • Clients cannot send to wildcard queues
  • Clients cannot subscribe to wildcard topics,

Answer : Clients cannot publish to wildcard topics Clients cannot receive from wildcard queues. Clients cannot send to wildcard queues

Which two statements are true about EMS management of persistent messages? (Choose two.)


Options are :

  • Persistent messages sent to a queue are written to disk only if that queue has at least one durable consumer or one consumer with a fault-tolerant connection to the EMS server
  • Persistent messages published to a topic are written to disk only if that topic has at least one durable subscriber or one subscriber with a fault-tolerant connection to the EMS server.
  • Persistent messages sent to a queue are always written to disk.
  • Persistent messages published to a topic are always written to disk,

Answer : Persistent messages published to a topic are written to disk only if that topic has at least one durable subscriber or one subscriber with a fault-tolerant connection to the EMS server. Persistent messages sent to a queue are always written to disk.

Tibco TB0-120 Enterprise Message Service 6 Practice Exam Set 1

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions