ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 5

A restore must be performed. The administrator is trying to view the valid images for a client, but the following error occurs: WARNING: Server does not contain any valid images. Which two may be incorrectly configured? (Select two.) A. schedule type for restores B. destination client for restores C. server to use for backups and restores D. media server for backups and restores E. policy types for restore   


Options are :

  • C,E (Correct)
  • A,E
  • D,E
  • A,B
  • B,D

Answer : C,E

A backup job exits with Status Code 1: the requested operation was partially successful. How is this exit code analyzed? 


Options are :

  • by reviewing thebpdbm log file on the master server
  • by reviewing devicemonitor status
  • by reviewing thebpdbjobs log file on the master server
  • by reviewing All Log Entries under Reports on the master server (Correct)

Answer : by reviewing All Log Entries under Reports on the master server

Which statement is true about re-using space on a tape that has a FULL status and that contains both expired and unexpired backups? 


Options are :

  • If the first image on the media becomes expired, SymantecNetBackup 7.0 can write up until the first block of unexpired data.
  • All remaining images on the media must expire, or be manually expired, before space on the media can be used again. (Correct)
  • There must be at least one expired backup on the media and it must be the only available media in the pool
  • SymantecNetBackup 7.0 can re-use any area of the media that contains expired data.

Answer : All remaining images on the media must expire, or be manually expired, before space on the media can be used again.

For which two use cases is it appropriate to run manual backups? (Select two.) A. to back up a client before an upgrade B. to force a queued job to run immediately C. to troubleshoot job errors D. to span jobs across multiple media E. to consolidaterestore points   


Options are :

  • D,B
  • A,B
  • B,A
  • C,A
  • A,C (Correct)

Answer : A,C

What is done to prevent the Symantec NetBackup 7.0 administration console on a media server from connecting to a master server? 


Options are :

  • move the media server name from the server list to the media server list (Correct)
  • add the media server name to the media server list and the master server list
  • uninstall the administration console from the media server
  • remove the media server name from both server lists

Answer : move the media server name from the server list to the media server list

An administrator installs two new LTO4 drives in a tape library with two existing LTO3 tape drives. What should the administrator configure next? 


Options are :

  • a new storage unit for each tape drive
  • an existing storage unit because LTO4 is backwards compatible with LTO3
  • a new storage unit for the LTO4 tape drives (Correct)
  • the two new LTO4 tape drives into an existing storage unit with the existing tape drives

Answer : a new storage unit for the LTO4 tape drives

An administrator creates a storage lifecycle policy with the following configuration: Use For Storage Unit Retention Period Backup AdvancedDisk1 2 weeks Duplication PureDisk1 1 month Duplication TLD_01234 1 year Upon saving the policy the administrator receives an error. Which setting should the administrator change to resolve the error?   


Options are :

  • change the default "Maximum number of jobs per client"
  • change the second storage unit to TLD tape
  • change the default "Maximum backup copies" (Correct)
  • change the first retention period to 1 month

Answer : change the default "Maximum backup copies"

Symantec NetBackup 7.0 is configured with a disk storage unit that has staging enabled. Some of the images in the disk storage unit have been successfully duplicated. The disk storage unit becomes full. What occurs next? 


Options are :

  • The staging storage unit is skipped and backups are sent directly to the final storage unit
  • Backups to the disk storage unitfails with a Status 129 because the storage unit is full.
  • Duplicated images are automatically purged until the high water mark has been reached.
  • Duplicated images are automatically purged until the low water mark has been reached. (Correct)

Answer : Duplicated images are automatically purged until the low water mark has been reached.

Which report identifies volumes that were used for backups within a specified time period? 


Options are :

  • Tape Logs
  • Tape Contents
  • Tape Summary
  • Tape Written (Correct)

Answer : Tape Written

An administrator needs to ensure that a restore job is initiated at 3 a.m. tomorrow morning. The administrator will leave the data center tonight at 9 p.m. and will only have access to the system after 6 a.m. tomorrow morning. What should the administrator do to initiate the job at 3 a.m.? 


Options are :

  • use the "Go into effect at" setting on the restore job to start the job at 3 a.m.
  • schedule a task to automatically start a bprestore command at 3 a.m (Correct)
  • initiate and then suspend the restore job, then select "resume at" and select "in 6 hours"
  • create a restore policy that goes active at 3 a.m

Answer : schedule a task to automatically start a bprestore command at 3 a.m

A tape library had the robot replaced and now the robot is reading the barcodes with additional characters. Which rule can be established so that Symantec NetBackup 7.0 uses the original characters? 


Options are :

  • MediaID barcode
  • MediaID setup
  • MediaID generation (Correct)
  • MediaID creation

Answer : MediaID generation

What is required to update clustered systems using Symantec NetBackup 7.0 LiveUpdate? 


Options are :

  • Unlimited jobs must be used per policy
  • All virtual node names must be entered in theLiveUpdate policy
  • All cluster node names must be entered in theLiveUpdate policy (Correct)
  • OneLiveUpdate policy must be created per Symantec NetBackup domain

Answer : All cluster node names must be entered in theLiveUpdate policy

A request is made to change volume residences. Which two conditions must be met in the volume group that is associated with the changes? (Select two.) A. All volumes in a volume group must have the same residence. B. All volumes must have barcode labels. C. All volumes must be assigned to scratch pool. D. All volumes must be vaulted before adding volumes to the group. E. All volumes must have the same media type. 


Options are :

  • A,E (Correct)
  • B,D
  • D,C
  • A,B
  • C,B

Answer : A,E

Every time there is a backup attempt of the client named Alpha, the Symantec NetBackup 7.0 administrator receives a network connectivity error. Which command can be used to help determine if the Symantec NetBackup client service is listening? 


Options are :

  • bptestbpcd (Correct)
  • bpresolve
  • bpcd
  • bpclient

Answer : bptestbpcd

A Symantec NetBackup 7.0 master server is backing up three clients over a slow WAN link to a single tape drive with multiplexing set to 1 for the storage unit. The WAN link is prone to periodic network interruptions outside of the administrator's control. What should the administrator do to ensure that a backup of these clients can be completed successfully in the shortest time period? 


Options are :

  • enable the "Checkpoint" attribute on the policy to ensure the backups can be completed (Correct)
  • choose the "Enable Granular Recovery" attribute so that the client splits the data into smaller chunks before sending it to the storage unit
  • configure the bandwidth settings in host properties of the master server to allow the slowrunning backups to complete
  • enable the "Perform snapshot backups" attribute to ensure that the backups can be completed

Answer : enable the "Checkpoint" attribute on the policy to ensure the backups can be completed

A new Symantec NetBackup 7.0 client is installed that must communicate across a firewall to its master/media server. Which Symantec NetBackup process helps reduce the number of ports that must be opened in the firewall? 


Options are :

  • PBX
  • vxat
  • bpcd
  • vnetd (Correct)

Answer : vnetd

Which two statements are true about duplication in Symantec NetBackup 7.0? (Select two.) A. Duplications may be performed without usingNetBackup Vault. B. In any multiple media server environment, the source and destination media must reside on the same media server. C. An entire tape is copied block by block from source to destination. D. Unexpired images can be duplicated from source to destination. E. Due to formatting concerns, tape drives used in the duplication must be of the same media type. 


Options are :

  • C,D
  • B,C
  • E,A
  • A,B
  • A,D (Correct)

Answer : A,D

Which tab in the new policy dialog box allows an administrator to select a volume pool? 


Options are :

  • Media
  • Attributes (Correct)
  • None
  • Volume
  • Pool

Answer : Attributes

An administator has a tape that has been previously used by Symantec NetBackup 7.0 for client backups, but no longer contains valid data. The barcode has been changed, and the tape has been moved to a different Symantec NetBackup domain. What must be done to use this tape in the new Symantec NetBackup domain? 


Options are :

  • re-inventory the robot library
  • relabel the tape (Correct)
  • expire the media
  • move the tape to the scratch volume pool

Answer : relabel the tape

When performing a catalog backup, the Symantec NetBackup relational database (NBDB) is copied to a temporary location before being backed up. On a Windows master server, where is the temporary location for the NBDB files? 


Options are :

  • install_path\NetBackupDB\staging (Correct)
  • install_path\NetBackupDB\temp
  • install_path\NetBackupDB\data
  • install_path\NetBackupDB\DbExt\Catalog

Answer : install_path\NetBackupDB\staging

Which Symantec NetBackup 7.0 process is responsible for scheduling backup jobs on the master server? 


Options are :

  • nbpem (Correct)
  • bpjobd
  • nbemm
  • bpsched

Answer : nbpem

An organization has Symantec NetBackup 7.0 client machines with a large number of files distributed across multiple file systems that are being backed up to a library with high-speed tape drives. Which two steps should the administrator take to ensure the greatest number of backup streams are active concurrently? (Select two.) A. select the "Enable multiple data streams" policy attribute and edit the "Maximum jobs per client" master server host property B. create a "Media Server Load Balancing" type storage unit group to enable additional backup streams to become active simultaneously C. enable the client-side deduplication feature so that only unique data is sent from the client to the media server D. select the Enable multiplexing attribute within the storage unit and the policy schedule E. configure the "Max drives this master" attribute to the number of tape drives that are available within the library 


Options are :

  • A,E
  • A,B
  • A,D (Correct)
  • E,C
  • A,C

Answer : A,D

An administrator is configuring a catalog backup policy without using a scratch pool. Which volume pool includes information about whether there are sufficient tapes?   


Options are :

  • None
  • CatalogBackup (Correct)
  • NetBackup
  • Catalog

Answer : CatalogBackup

A server's file system is corrupt and a restore is required. The system is being backed up using True Image Restore ("Collect true image restore information with move detection" is enabled on the policy). The most recent backups of this file system are: - Monday: A full backup - Tuesday: A differential incremental backup - Wednesday: A cumulative incremental backup - Thursday: A differential incremental backup What is the maximum number of backup images that will be used to restore all of the most recent data for this server? 


Options are :

  • 3 (Correct)
  • 2
  • 1
  • 4

Answer : 3

An organization has the following requirements for a server's backup data: Two copies need to be retained for the same backup data. One copy needs to be sent to disk with a retention period of one month. A second copy needs to be sent to tape with a retention period of six months. The copy on disk may only be automatically deleted by Symantec NetBackup 7.0 after one month. Because of licensing, this must be configured avoiding using storage lifecycle policies. How can a Symantec NetBackup 7.0 administrator configure a backup policy, maximizing automation, to meet these requirements? 


Options are :

  • configure two identical schedules for the same policy, then configure one schedule to go to a basic disk with retention of one month and configure the other schedule to go to tape with retention of six months
  • create a basic disk staging storage unit with a fixed retention of one month and staging to tape with a retention of six months; configure the backup policy to use this disk
  • configure the backup policy to back up to a basic disk with retention of one month; run thebpduplicate command to duplicate to tape with retention of six months
  • configure the backup policy so that the schedule runs multiple backups: one to basic disk with one month retention, and one to tape with six months retention (Correct)

Answer : configure the backup policy so that the schedule runs multiple backups: one to basic disk with one month retention, and one to tape with six months retention

Which Symantec NetBackup 7.0 command can be used to move a tape volume to a different volume pool? 


Options are :

  • bpmove
  • vmupdate
  • bpmedia
  • vmchange (Correct)

Answer : vmchange

Which command is used to configure tape drives and robotic devices in Symantec NetBackup 7.0? 


Options are :

  • tpautoconfig
  • tapeconfig
  • tpconfig (Correct)
  • tldconfig

Answer : tpconfig

The new IT Manager requests a detailed list of all media servers, which includes information about which tape libraries are attached to them and which media is currently installed in each tape library. Which command should an administrator use to obtain this information? 


Options are :

  • ncss (NetBackup Consolidated Support Script)
  • nbmss (NetBackup Master Support Script)
  • ndmp (NetBackup Detail Management Program)
  • nbsu (NetBackup Support Utility) (Correct)

Answer : nbsu (NetBackup Support Utility)

The master server catalog is being recovered to a new server and the following error is displayed: Please insert the following media and run the volume configuration wizard or the vmupdate command to update the NetBackup database. * Host - train1 * MediaID- GBP847 * Barcode - GBP847S1 In the administration console, barcode GBP847S1 is associated with media ID P847S1. What should be done?   


Options are :

  • find the tape labeled P847S1, insert it into the robot, and then perform recovery
  • delete the tape and set the barcode rule accordingly, then re-inventory the library and run recovery
  • delete the tape and set the media ID generation rule accordingly, then re-inventory the library and run recovery (Correct)
  • right-click media ID GBP847 in the administration console and rename it to P847S1, then perform recovery

Answer : delete the tape and set the media ID generation rule accordingly, then re-inventory the library and run recovery

When changes have been made to devices, which service must be stopped and restarted on the master server and all affected media servers? 


Options are :

  • bpdbm
  • bprd
  • vmd
  • ltid (Correct)

Answer : ltid

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions