ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 2

Which information is backed up by a cumulative incremental backup schedule?


Options are :

  • only files that have changed since the last incremental backup
  • files and folders that have changed since the last incremental backup
  • files and folders that have changed since the last full backup (Correct)
  • only folders that have changed since the last incremental backup

Answer : files and folders that have changed since the last full backup

250-405 Administration of Symantec Management Platform Test Set 1

Two disk storage units, STU-A and STU-B, with default settings are configured. Two policies,POL1 and POL2, are scheduled to start at the same time. POL1 uses STU-A and POL2 uses "AnyAvailable" storage unit.What is the status of the jobs initiated by POL1 and POL2?


Options are :

  • POL1 job uses STU-A and POL2 job queues until POL1 job completes.
  • Both POL1 and POL2 use STU-A only.
  • POL1 job uses STU-A and POL2 job uses STU-B.
  • POL1 job uses STU-A and POL2 job fails with error "Storage units are not available." (Correct)

Answer : POL1 job uses STU-A and POL2 job fails with error "Storage units are not available."

A previously used volume has been inserted into a robot without a barcode reader.Which Symantec NetBackup 7.0 administration console operation should be used to update theslot number of the tape within the robot?


Options are :

  • move (Correct)
  • change
  • update
  • rescan

Answer : move

A company needs to silently push install Symantec NetBackup 7.0 clients to the Windows servers.Which file does the administrator need to modify to silently install clients?


Options are :

  • silentclient.cmd (Correct)
  • unattended.txt
  • pushinstall.bat
  • setup.exe /silent

Answer : silentclient.cmd

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 11

A Prioritized storage unit group is configured with two BasicDisk storage units and one tapestorage unit that is configured with three DLT tape drives.What happens if a backup is running on this storage unit group and one of the two BasicDiskstorage units becomes full as the job is being written to it?


Options are :

  • The backup can continue on the other disk storage unit (if available) in the group if "disk spanning" is enabled. (Correct)
  • The backup fails because spanning is only allowed on tape storage units.
  • The backup continues to a tape on the same media server.
  • The backup continues on another media server if "media server spanning" is enabled and a storage unit is free.

Answer : The backup can continue on the other disk storage unit (if available) in the group if "disk spanning" is enabled.

Which action must the administrator perform to direct backups to tape drives using SymantecNetBackup 7.0?A. add new media into the scratch volume poolB. delete this optionC. install Media Manager software on the master serverD. create and configure storage devicesE. install Media Manager software on the EMM server


Options are :

  • B,D (Correct)
  • D,E
  • A,B
  • D,C
  • B,C

Answer : B,D

Which two are valid Media Manager storage unit types? (Select two.)A. standalone tape driveB. NDMP devicesC. AdvancedDiskD. RobotE. BasicDisk


Options are :

  • B,C
  • A,B
  • E,A
  • A,D (Correct)
  • B,D

Answer : A,D

ST0-135 Symantec Network Access Control 12.1 Technical Asses Set 1

A backup has allocated SQL001 for a SQL backup job from the scratch pool and has assigned thistape to the NetBackup volume pool. The administrator now needs to move SQL001 to a previouslycreated volume pool called SQLTapes.How is this accomplished?


Options are :

  • right-click SQL001 and select Change
  • expire SQL001, right-click SQL001 and select Change (Correct)
  • right-click SQL001 and select
  • delete SQL001, right-click SQL001 and select Move

Answer : expire SQL001, right-click SQL001 and select Change

To enable Symantec Netbackup 7.0 to manage allocation of volumes to volume pools, media mustbe placed into which pool?


Options are :

  • DataStore
  • None
  • NetBackup
  • Scratch (Correct)

Answer : Scratch

Which two have a media and/or density type? (Select two.)A. barcodesB. robotsC. volume poolsD. drivesE. storage units


Options are :

  • B,C
  • B,E
  • D,E (Correct)
  • C,A
  • A,B

Answer : D,E

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 2

What are two benefits of client-side deduplication? (Select two.)A. reduces network bandwidthB. reduces backup windowC. reduces production dataD. reduces CPU useE. reduces memory use


Options are :

  • E,D
  • B,C
  • C,A
  • D,E
  • A,B (Correct)

Answer : A,B

Cleaning media resides in which volume pool?


Options are :

  • None (Correct)
  • Scratch
  • NetBackup
  • Clean

Answer : None

An administrator needs to configure two tape drives in a new Symantec NetBackup 7.0 Windowsmedia server. The Windows Device Manager indicates that the tape drives are showing up asUnknown Devices.What should the administrator do to resolve this problem?


Options are :

  • download and install the vendor tape driver (Correct)
  • update the device mappings file
  • install the Symantec tape drivers
  • use the administration console to configure the tape drive

Answer : download and install the vendor tape driver

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 1

What is required to perform remote administration or user operations using the NetBackup-Javaconsole?


Options are :

  • a valid user on the SymantecNetBackup client machine
  • a valid user in thebp.conf
  • a valid account on the SymantecNetBackup server or client machine (Correct)
  • a valid LDAP account

Answer : a valid account on the SymantecNetBackup server or client machine

AdvancedDiskstorage units are unable to span which type of backup targets?


Options are :

  • from one disk array to another
  • from one disk pool to another (Correct)
  • a volume with a different file system
  • a different volume in the disk pool

Answer : from one disk pool to another

What is the default location for a Symantec NetBackup 7.0 installation on Windows?


Options are :

  • C:\Program Files\Veritas (Correct)
  • C:\Program Files\Symantec
  • C:\NetBackup
  • C:\Program Files\NetBackup

Answer : C:\Program Files\Veritas

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 10

What does Media Manager do when a volume reaches maximum mounts?


Options are :

  • suspend the tape (Correct)
  • return the tape to scratch pool
  • expire the tape
  • freeze the tape

Answer : suspend the tape

What must be done to remove an AdvancedDisk pool from a media server?


Options are :

  • remove the disk volumes one at a time
  • expire the credentials from the storage server
  • remove storage units and expire images that target the disk pool (Correct)
  • clear the high and low water marks

Answer : remove storage units and expire images that target the disk pool

In Symantec NetBackup 7.0 and Media Manager, which two configurations are allowed? (Select

two.)

A. media type = DLT, device = DLT, robot = TLD

B. media type = HCART, device = DLT, robot = TLD

C. media type = DLT2_CLN, device = DLT2, robot = TL8

D. media type = DLT2_CLN, device = DLT2, robot = TLD

E. media type = DLT4, device = DLT4, robot = TLD


Options are :

  • A,B
  • A,D (Correct)
  • D,E
  • D,C
  • E,C

Answer : A,D

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 9

An administrator configures a Symantec NetBackup 7.0 environment where there is only one tapedrive available. The storage unit multiplex setting is 5. The schedule multiplex setting is 3. Sixbackup jobs initiate from that schedule.Given this configuration, how many backup streams will be multiplexed?


Options are :

  • 1
  • 15
  • 5
  • 3 (Correct)

Answer : 3

Which default Windows Open File Backup method is used during a backup for a newly installed Symantec NetBackup 7.0 Windows 2003 client? 


Options are :

  • Advanced Open File Option (AOFO)
  • snapshot provider configured in Global Client Attribute
  • VERITAS Snapshot Provider (VSP)
  • Microsoft Volume Shadow Copy Service (VSS) (Correct)

Answer : Microsoft Volume Shadow Copy Service (VSS)

250-253 Administration of Veritas Cluster Server 6.0 Test Set 8

What is the default media server SCSI reserve setting?   


Options are :

  • SPC-3 SCSI reserve
  • SCSI Persistent reserve
  • SPC-4 SCSI reserve
  • SPC-2 SCSI reserve (Correct)

Answer : SPC-2 SCSI reserve

Five media servers are configured in a storage unit group and media server load balancing is configured. There are 20 backups currently running from ten clients across the LAN. A new backup is started. What is the first criteria Symantec NetBackup 7.0 uses to determine which media server to use for the backup? 


Options are :

  • server rank, based on the media server performance (Correct)
  • the media server that has themost blank tapes assigned
  • server rank, based on the Device Management Service
  • the media server that has the most free disk space

Answer : server rank, based on the media server performance

Which two settings can be configured when performing a custom client installation of SymantecNetBackup 7.0 on a Microsoft Windows 2003 system? (Select two.)A. NetBackup service accountB. EMM serverC. storage serverD. backup policyE. default port numbers


Options are :

  • C,B
  • E,A
  • D,A
  • A,B
  • A,E (Correct)

Answer : A,E

250-371 Administration Symantec NetBackup 7.5 Windows Exam Set 9

A company needs to configure storage unit groups in Symantec NetBackup 7.0 to attempt toequally distribute backup jobs among available storage units.Which two storage unit group options satisfy the requirement? (Select two.)A. Round RobinB. PrioritizedC. FailoverD. Media Server Load BalanceE. FirstIn First Out (FIFO)


Options are :

  • A,B
  • A,D (Correct)
  • D,A
  • A,C
  • C,B

Answer : A,D

A Symantec NetBackup 7.0 customer has a scratch pool named "scratch." The customer uses a backup policy named XYZ to initiate daily backups of several client systems and uses a volume pool named VOL99. When does Symantec NetBackup move a tape from the scratch pool to the volume pool used by the XYZ backup policy? 


Options are :

  • when there are five or fewer ACTIVE tapes in any volume pool and a new XYZ backup job is run
  • when the scratch pool is listed as the destination volume pool in the XYZ backup policy and a new XYZ backup job is run
  • when there are zero ACTIVE tapes with available space remaining in the VOL99 volume pool and a new XYZ backup job is run (Correct)
  • when there is only one ACTIVE tape left with any available space in the VOL99 volume pool and a new XYZ backup job is run

Answer : when there are zero ACTIVE tapes with available space remaining in the VOL99 volume pool and a new XYZ backup job is run

A master server controls five media servers, each running 100 jobs per day. The master serverhas two CPUs and 2 GB of RAM. A company purchases an additional media server and adds it tothe Symantec NetBackup 7.0 domain. The performance of the master server is severely affectedand jobs are now queuing. Which action should an administrator take to resolve this problem?


Options are :

  • add HBAs to the master server
  • add disk space to the master server
  • B. add CPUs to the master server
  • add memory to the master server (Correct)

Answer : add memory to the master server

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 7

A company needs to update the volume configuration. Which prerequisite must be met before proceeding?   


Options are :

  • The robotic library must be TLD.
  • NONE
  • The Symantec NetBackup environment must consist of at least one Media ID generation rule.
  • The robotic library must be configured with a robot type. (Correct)
  • The robotic library must contain media type HCART.

Answer : The robotic library must be configured with a robot type.

By default, how often does the Schedule Backup Attempt property cause Symantec NetBackup 7.0 to retry backups? 


Options are :

  • twice in 12 hours (Correct)
  • once in 24 hours
  • once in 8 hours
  • twice in 24 hours

Answer : twice in 12 hours

An administrator configures STU-A with the "On Demand Only" option. When will backups write to this storage unit? 


Options are :

  • when the policy specifies STU-A as an attribute (Correct)
  • when the storage unit specified in the policy is full or unavailable
  • when the Any Available storage unit is selected in the policy
  • when all other storage units are unavailable

Answer : when the policy specifies STU-A as an attribute

250-352 Administration of Storage Foundation and HA 6.0 Test Set 8

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions