ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 6

An administrator is removing a media server from a Symantec NetBackup 7.0 environment. Which two actions must be performed prior to shutting down the media server? (Select two.)


Options are :

  • usebpmedia to expire the media server images from the older server
  • uninstall the media server software from the media server being removed
  • run a complete backup on the old media server
  • remove the storage unit reference to the media server (Correct)
  • usebpmedia to migrate media from the old server to another media server (Correct)

Answer : remove the storage unit reference to the media server usebpmedia to migrate media from the old server to another media server

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 4

An administrator is remotely logged into a Symantec NetBackup 7.0 server via the terminal window and needs to configure robots and drives. Which command should be used to complete the configuration?


Options are :

  • tpreq
  • vmconf
  • nbdevconfig
  • tpconfig (Correct)

Answer : tpconfig

In a Symantec NetBackup 7.0 environment, where does the image database reside?


Options are :

  • on the media server
  • on the master server (Correct)
  • within the master server's Sybase database
  • within the EMM database

Answer : on the master server

What is required to update clustered systems using Symantec NetBackup 7.0 LiveUpdate?


Options are :

  • All virtual node names must be entered in theLiveUpdate policy.
  • OneLiveUpdate policy must be created per Symantec NetBackup domain.
  • Unlimited jobs must be used per policy
  • All cluster node names must be entered in theLiveUpdate policy. (Correct)

Answer : All cluster node names must be entered in theLiveUpdate policy.

ST0-237 Symantec Loss Prevention Technical Practice Exam Set 5

An administrator needs to ensure that a restore job is initiated at 3 a.m. tomorrow morning. The administrator will leave the data center tonight at 9 p.m. and will only have access to the system after 6 a.m. tomorrow morning. What should the administrator do to initiate the job at 3 a.m.?


Options are :

  • schedule a task to automatically start a bprestore command at 3 a.m. (Correct)
  • use the "Go into effect at" setting on the restore job to start the job at 3 a.m.
  • initiate and then suspend the restore job, then select "resume at" and select "in 6 hours"
  • create a restore policy that goes active at 3 a.m.

Answer : schedule a task to automatically start a bprestore command at 3 a.m.

What is the default media server SCSI reserve setting?


Options are :

  • SPC-2 SCSI reserve (Correct)
  • SPC-3 SCSI reserve
  • SPC-4 SCSI reserve
  • SCSI Persistent reserve

Answer : SPC-2 SCSI reserve

Which component of Symantec NetBackup 7.0 includes Symantec NetBackup encryption?


Options are :

  • EMM server
  • client (Correct)
  • master server
  • bare metal restore

Answer : client

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 5

An administrator must recover an expired image from a tape volume where only one remaining copy exists and there are other unexpired images on the volume. Which action should the administrator perform?


Options are :

  • run the Tape Contents report
  • duplicate the volume
  • inventory the media then run verify
  • import the volume (Correct)

Answer : import the volume

Which storage unit types are supported with synthetic backup?


Options are :

  • Media Manager and NDMP storage units only
  • Disk and NDMP storage units only
  • Media Manager storage units
  • Disk and Media Manager storage units only (Correct)

Answer : Disk and Media Manager storage units only

An organization has a library with ten drives on the Storage Area Network (SAN). The library can be reached by all five media servers. Currently, two drives are assigned per media server. Which option or agent can be used to allow each media server to use all drives on the SAN?


Options are :

  • NetBackup Virtual Tape Option
  • NetBackup SAN Media Server
  • Shared Storage Option (Correct)
  • NetBackup OpenStorage

Answer : Shared Storage Option

250-254 Administration of Symantec Cluster Server 6.1UN Exam Set 3

In which two areas of Symantec NetBackup 7.0 is multiplexing configured?(Select two.)


Options are :

  • storage unit group configuration
  • storage unit configuration (Correct)
  • media server host properties
  • master server host properties
  • policy schedules attributes (Correct)

Answer : storage unit configuration policy schedules attributes

A company has decided to install Symantec NetBackup 7.0 in a cluster. What are two prerequisites for this installation? (Select two.)


Options are :

  • The installation DVD must be shared across all nodes.
  • Replication must be installed.
  • A virtual host name and IP address must be configured. (Correct)
  • The shared disk must be accessible to all nodes. (Correct)
  • Two cross-over cables must be installed.

Answer : A virtual host name and IP address must be configured. The shared disk must be accessible to all nodes.

Which section in the Symantec NetBackup 7.0 administration console provides visibility into the backup image database?


Options are :

  • Media
  • Host Properties
  • Activity Monitor
  • Catalog (Correct)

Answer : Catalog

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 11

Which statement best describes your ability to configure tape devices, storage units, volumes, and policies using Symantec NetBackup 7.0?


Options are :

  • I can configure tape devices, storage units, volumes, and policies using SymantecNetBackup 7.0 WITHOUT assistance
  • I am NOT familiar with how to configure tape devices, storage units, volumes, and policies using SymantecNetBackup 7.0
  • I can configure tape devices, storage units, volumes, and policies using SymantecNetBackup 7.0 with MINIMAL assistance (e.g., referring to documentation). (Correct)
  • I am familiar with how to configure tape devices, storage units, volumes, and policies using SymantecNetBackup 7.0 but have NO field experience.
  • I can configure tape devices, storage units, volumes, and policies using SymantecNetBackup 7.0 with SIGNIFICANT assistance (e.g., calling support or working with a entor).

Answer : I can configure tape devices, storage units, volumes, and policies using SymantecNetBackup 7.0 with MINIMAL assistance (e.g., referring to documentation).

In Symantec NetBackup 7.0 there are currently three storage units (STU-A, STU-B, and STU-C). Only STU-A is set as On Demand Only. Three policies have been created as follows: PolicyA is set up to use storage unit STU-A. PolicyB is set up as an "Any Available" storage unit. PolicyC is set up to use STU-C. If STU-B fills up, and STU-A and STU-C still have available space, what happens to future backups for PolicyB?


Options are :

  • Backups will fail with an error message indicating that media is unavailable.
  • Backups will use STU-C (Correct)
  • Backups will use STU-A.
  • Backups will remain queued waiting for available space on STU-B.

Answer : Backups will use STU-C

Which report identifies volumes that were used for backups within a specified time period?


Options are :

  • Tape Written (Correct)
  • Tape Contents
  • Tape Logs
  • Tape Summary

Answer : Tape Written

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 5

Which two databases are used by Symantec NetBackup 7.0? (Select two.)


Options are :

  • Device
  • Media
  • Volume
  • EMM (Correct)
  • Image (Correct)

Answer : EMM Image

A company purchased and installed a new robotic tape library controlled by Symantec NetBackup 7.0. This device has been configured in Symantec NetBackup and needs to be tested prior to initiating any backups. Which command should be run to verify robotic library functionality?


Options are :

  • robtest (Correct)
  • vmverify
  • libtest
  • nbdevquery

Answer : robtest

Which report shows how many volumes are at each retention level?


Options are :

  • Tape Logs
  • Tape Contents
  • Tape List
  • Tape Summary (Correct)

Answer : Tape Summary

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 6

A collection of all backup data from a client is assembled into a single stream and written to tape or disk. What is this called?


Options are :

  • backup policy
  • file metadata
  • backup image (Correct)
  • catalog .f file

Answer : backup image

Which action must be performed to add new media to a tape library?


Options are :

  • move Volumes dialog box
  • import media
  • compare contents with volume
  • update volume configuration (Correct)

Answer : update volume configuration

Where are exclude list configurations stored?


Options are :

  • client (Correct)
  • Enterprise Media Manager (EMM) server
  • media server
  • master server

Answer : client

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 1

An administrator is having difficulty determining the status of a drive and wants to manually load a tape into the drive. Which command should the administrator use to accomplish this?


Options are :

  • vmcheckxxx
  • vmoprcmd
  • bpmedia
  • robtest (Correct)

Answer : robtest

A company needs to silently push install Symantec NetBackup 7.0 clients to the Windows servers. Which file does the administrator need to modify to silently install clients?


Options are :

  • pushinstall.bat
  • silentclient.cmd (Correct)
  • unattended.txt
  • setup.exe /silent

Answer : silentclient.cmd

What is required to install a Symantec NetBackup 7.0 media server?


Options are :

  • installed media devices (disk or tape)
  • an EMM server that is already installed
  • a master server that is already installed
  • a valid SymantecNetBackup license key (Correct)

Answer : a valid SymantecNetBackup license key

250-253 Administration of Veritas Cluster Server 6.0 Test Set 2

A Symantec NetBackup 7.0 client and media server are separated by a slow wide area network (WAN) connection. Which policy attribute should be enabled to minimize the amount of data that travels over the WAN?


Options are :

  • allow multiple data streams
  • limit jobs per policy
  • enable network throttle
  • compression (Correct)

Answer : compression

Which statement best describes your ability to manage media, images, and backup copies using Symantec NetBackup 7.0?


Options are :

  • I am NOT familiar with how to manage media, images, and backup copies using SymantecNetBackup 7.0.
  • I can manage media, images, and backup copies using SymantecNetBackup 7.0 WITHOUT assistance.
  • I am familiar with how to manage media, images, and backup copies using SymantecNetBackup 7.0 but have NO field experience.
  • I can manage media, images, and backup copies using SymantecNetBackup 7.0 with SIGNIFICANT assistance (e.g. calling support or working with a mentor)
  • I can manage media, images, and backup copies using SymantecNetBackup 7.0 with MINIMAL assistance (e.g., referring to documentation). (Correct)

Answer : I can manage media, images, and backup copies using SymantecNetBackup 7.0 with MINIMAL assistance (e.g., referring to documentation).

An administrator attempts to use the Backup, Archive, and Restore interface to restore the server's data. Upon selecting the client name and policy type, the administrator notices that restore points are unavailable. The backup jobs have been completed successfully. What should the administrator do first to troubleshoot this issue?


Options are :

  • verify the restore policy is enabled
  • verify the backup image has yet to expire (Correct)
  • verify the tape media is available in the tape library
  • verify the date and time are set correctly on the media server

Answer : verify the backup image has yet to expire

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 8

A restore must be performed. The administrator is trying to view the valid images for a client, but the following error occurs: WARNING: Server does not contain any valid images. Which two may be incorrectly configured? (Select two.)


Options are :

  • schedule type for restores
  • destination client for restores
  • policy types for restore (Correct)
  • server to use for backups and restores (Correct)
  • media server for backups and restores

Answer : policy types for restore server to use for backups and restores

Which two utilities can be used to view and monitor all running Symantec NetBackup 7.0 jobs? (Select two.)


Options are :

  • MMC Snap-in
  • Backup, Archive, and Restore interface
  • Activity Monitor (Correct)
  • Job Tracker
  • OpsCenter (Correct)

Answer : Activity Monitor OpsCenter

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions