ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 1

A tape drive under robotic control is available to Symantec NetBackup 7.0. An administrator needs to make it unavailable for maintenance, without affecting other drives in the tape library. How should the administrator make the tape drive temporarily unavailable for backups, using the administration console?


Options are :

  • in the Device Monitor, right-click the drive and select Down Drive
  • under Devices -> Media Servers, right-click the media server and select Deactivate
  • under Devices -> Drives, right-click the drive and select Deactivate
  • select the appropriate storage unit and reduce the "Maximum concurrent write drives" setting by 1

Answer : in the Device Monitor, right-click the drive and select Down Drive

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 1

Which statement best describes your ability to modify and maintain the Symantec NetBackup 7.0 configuration?


Options are :

  • I can modify and maintain the SymantecNetBackup 7.0 configuration with SIGNIFICANT assistance (e.g., calling support or working with a mentor).
  • I can modify and maintain the SymantecNetBackup 7.0 configuration with MINIMAL assistance (e.g., referring to documentation).
  • I am familiar with how to modify and maintain the SymantecNetBackup 7.0 configuration but have NO field experience.
  • I can modify and maintain the SymantecNetBackup 7.0 configuration WITHOUT assistance.
  • I am NOT familiar with how to modify and maintain the SymantecNetBackup 7.0 configuration.

Answer : I can modify and maintain the SymantecNetBackup 7.0 configuration with SIGNIFICANT assistance (e.g., calling support or working with a mentor).

Which statement best describes your level of understanding of Symantec NetBackup 7.0 performance tuning?


Options are :

  • I am NOT familiar with SymantecNetBackup 7.0 performance tuning and cannot describe them.
  • I fully understand ALL SymantecNetBackup 7.0 performance tuning and can describe them in detail without assistance.
  • I understand SOME SymantecNetBackup 7.0 performance tuning and can describe them in detail with assistance.
  • I am familiar with SOME SymantecNetBackup 7.0 performance tuning but am UNABLE to describe them.
  • I understand MOST SymantecNetBackup 7.0 performance tuning and can describe them in detail without assistance.

Answer : I understand SOME SymantecNetBackup 7.0 performance tuning and can describe them in detail with assistance.

Which statement best describes your ability to back up and recover Symantec NetBackup 7.0 catalogs?


Options are :

  • I am familiar with how to back up and recover SymantecNetBackup 7.0 catalogs but have NO field experience
  • I can back up and recover SymantecNetBackup 7.0 catalogs with MINIMAL assistance (e.g., referring to documentation).
  • I am NOT familiar with how to back up and recover SymantecNetBackup 7.0 catalogs.
  • I can back up and recover SymantecNetBackup 7.0 catalogs WITHOUT assistance
  • I can back up and recover SymantecNetBackup 7.0 catalogs with SIGNIFICANT assistance (e.g., calling support or working with a mentor).

Answer : I can back up and recover SymantecNetBackup 7.0 catalogs with SIGNIFICANT assistance (e.g., calling support or working with a mentor).

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 7

What should be entered into the SIZE_DATA_BUFFERS file to set the data buffer size to 64 KB?


Options are :

  • 64
  • BUFFERSIZE = 65536
  • BUFFERSIZE = 64
  • 65536

Answer : 65536

Which operation can be performed against all active and queued jobs when using the Activity Monitor from the administration console?


Options are :

  • cancel all jobs
  • suspend all jobs
  • delete all jobs
  • checkpoint all jobs

Answer : cancel all jobs

Which statement best describes your understanding of Symantec NetBackup 7.0 in a Windows environment?


Options are :

  • I have an ADVANCED LEVEL of understanding of SymantecNetBackup 7.0 in a Windows environment.
  • I have a BEGINNING LEVEL of understanding of SymantecNetBackup 7.0 in a Windows environment.
  • I have an INTERMEDIATE LEVEL of understanding of SymantecNetBackup 7.0 in a Windows environment.
  • I am NOT familiar with SymantecNetBackup 7.0 in a Windows environment.

Answer : I have an INTERMEDIATE LEVEL of understanding of SymantecNetBackup 7.0 in a Windows environment.

ST0-237 Symantec Data Loss Prevention 12 Technical Test Set 9

Two tapes with Media IDs TP501L and TP502L exist in a Symantec NetBackup 7.0 environment. Media ID TP501L was originally allocated to the SERVERS volume pool and Media ID TP502L was allocated to the SCRATCH volume pool. A policy is configured to use the SERVERS volume pool. The policy runs and media ID TP501L is allocated for use. All images on media ID TP501L have now expired. Media ID TP501L will be allocated to which volume pool?


Options are :

  • SERVERS
  • SCRATCH
  • None
  • NetBackup

Answer : SERVERS

Which version of NetBackup client (at a minimum) is required to use Symantec NetBackup LiveUpdate?


Options are :

  • 7.0 GA
  • 6.0 MP4
  • 6.5 GA
  • 6.0 GA

Answer : 6.5 GA

An administrator is removing a media server from a Symantec NetBackup 7.0 environment. Which two actions must be performed prior to shutting down the media server? (Select two.)


Options are :

  • usebpmedia to expire the media server images from the older server
  • uninstall the media server software from the media server being removed
  • run a complete backup on the old media server
  • remove the storage unit reference to the media server
  • usebpmedia to migrate media from the old server to another media server

Answer : remove the storage unit reference to the media server usebpmedia to migrate media from the old server to another media server

ST0-237 Symantec Loss Prevention Technical Practice Exam Set 10

An administrator is remotely logged into a Symantec NetBackup 7.0 server via the terminal window and needs to configure robots and drives. Which command should be used to complete the configuration?


Options are :

  • tpreq
  • vmconf
  • nbdevconfig
  • tpconfig

Answer : tpconfig

In a Symantec NetBackup 7.0 environment, where does the image database reside?


Options are :

  • on the media server
  • on the master server
  • within the master server's Sybase database
  • within the EMM database

Answer : on the master server

What is required to update clustered systems using Symantec NetBackup 7.0 LiveUpdate?


Options are :

  • All virtual node names must be entered in theLiveUpdate policy.
  • OneLiveUpdate policy must be created per Symantec NetBackup domain.
  • Unlimited jobs must be used per policy
  • All cluster node names must be entered in theLiveUpdate policy.

Answer : All cluster node names must be entered in theLiveUpdate policy.

250-405 Administration of Symantec Management Platform Exam Set 4

An administrator needs to ensure that a restore job is initiated at 3 a.m. tomorrow morning. The administrator will leave the data center tonight at 9 p.m. and will only have access to the system after 6 a.m. tomorrow morning. What should the administrator do to initiate the job at 3 a.m.?


Options are :

  • schedule a task to automatically start a bprestore command at 3 a.m.
  • use the "Go into effect at" setting on the restore job to start the job at 3 a.m.
  • initiate and then suspend the restore job, then select "resume at" and select "in 6 hours"
  • create a restore policy that goes active at 3 a.m.

Answer : schedule a task to automatically start a bprestore command at 3 a.m.

What is the default media server SCSI reserve setting?


Options are :

  • SPC-2 SCSI reserve
  • SPC-3 SCSI reserve
  • SPC-4 SCSI reserve
  • SCSI Persistent reserve

Answer : SPC-2 SCSI reserve

Which component of Symantec NetBackup 7.0 includes Symantec NetBackup encryption?


Options are :

  • EMM server
  • client
  • master server
  • bare metal restore

Answer : client

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 5

An administrator must recover an expired image from a tape volume where only one remaining copy exists and there are other unexpired images on the volume. Which action should the administrator perform?


Options are :

  • run the Tape Contents report
  • duplicate the volume
  • inventory the media then run verify
  • import the volume

Answer : import the volume

Which storage unit types are supported with synthetic backup?


Options are :

  • Media Manager and NDMP storage units only
  • Disk and NDMP storage units only
  • Media Manager storage units
  • Disk and Media Manager storage units only

Answer : Disk and Media Manager storage units only

An organization has a library with ten drives on the Storage Area Network (SAN). The library can be reached by all five media servers. Currently, two drives are assigned per media server. Which option or agent can be used to allow each media server to use all drives on the SAN?


Options are :

  • NetBackup Virtual Tape Option
  • NetBackup SAN Media Server
  • Shared Storage Option
  • NetBackup OpenStorage

Answer : Shared Storage Option

ST0-10X Veritas Storage Foundation 5 for Unix Practice Test Set 5

In which two areas of Symantec NetBackup 7.0 is multiplexing configured?(Select two.)


Options are :

  • storage unit group configuration
  • storage unit configuration
  • media server host properties
  • master server host properties
  • policy schedules attributes

Answer : storage unit configuration policy schedules attributes

A company has decided to install Symantec NetBackup 7.0 in a cluster. What are two prerequisites for this installation? (Select two.)


Options are :

  • The installation DVD must be shared across all nodes.
  • Replication must be installed.
  • A virtual host name and IP address must be configured.
  • The shared disk must be accessible to all nodes.
  • Two cross-over cables must be installed.

Answer : A virtual host name and IP address must be configured. The shared disk must be accessible to all nodes.

Which section in the Symantec NetBackup 7.0 administration console provides visibility into the backup image database?


Options are :

  • Media
  • Host Properties
  • Activity Monitor
  • Catalog

Answer : Catalog

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 3

Which statement best describes your ability to configure tape devices, storage units, volumes, and policies using Symantec NetBackup 7.0?


Options are :

  • I can configure tape devices, storage units, volumes, and policies using SymantecNetBackup 7.0 WITHOUT assistance
  • I am NOT familiar with how to configure tape devices, storage units, volumes, and policies using SymantecNetBackup 7.0
  • I can configure tape devices, storage units, volumes, and policies using SymantecNetBackup 7.0 with MINIMAL assistance (e.g., referring to documentation).
  • I am familiar with how to configure tape devices, storage units, volumes, and policies using SymantecNetBackup 7.0 but have NO field experience.
  • I can configure tape devices, storage units, volumes, and policies using SymantecNetBackup 7.0 with SIGNIFICANT assistance (e.g., calling support or working with a entor).

Answer : I can configure tape devices, storage units, volumes, and policies using SymantecNetBackup 7.0 with MINIMAL assistance (e.g., referring to documentation).

In Symantec NetBackup 7.0 there are currently three storage units (STU-A, STU-B, and STU-C). Only STU-A is set as On Demand Only. Three policies have been created as follows: PolicyA is set up to use storage unit STU-A. PolicyB is set up as an "Any Available" storage unit. PolicyC is set up to use STU-C. If STU-B fills up, and STU-A and STU-C still have available space, what happens to future backups for PolicyB?


Options are :

  • Backups will fail with an error message indicating that media is unavailable.
  • Backups will use STU-C
  • Backups will use STU-A.
  • Backups will remain queued waiting for available space on STU-B.

Answer : Backups will use STU-C

Which report identifies volumes that were used for backups within a specified time period?


Options are :

  • Tape Written
  • Tape Contents
  • Tape Logs
  • Tape Summary

Answer : Tape Written

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 7

Which two databases are used by Symantec NetBackup 7.0? (Select two.)


Options are :

  • Device
  • Media
  • Volume
  • EMM
  • Image

Answer : EMM Image

A company purchased and installed a new robotic tape library controlled by Symantec NetBackup 7.0. This device has been configured in Symantec NetBackup and needs to be tested prior to initiating any backups. Which command should be run to verify robotic library functionality?


Options are :

  • robtest
  • vmverify
  • libtest
  • nbdevquery

Answer : robtest

Which report shows how many volumes are at each retention level?


Options are :

  • Tape Logs
  • Tape Contents
  • Tape List
  • Tape Summary

Answer : Tape Summary

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Exam Set 3

A collection of all backup data from a client is assembled into a single stream and written to tape or disk. What is this called?


Options are :

  • backup policy
  • file metadata
  • backup image
  • catalog .f file

Answer : backup image

Which action must be performed to add new media to a tape library?


Options are :

  • move Volumes dialog box
  • import media
  • compare contents with volume
  • update volume configuration

Answer : update volume configuration

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions