ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 3

File system write performance starts to be affected on mirrored volumes assigned to a specific disk array. A path failure is suspected. Which two commands could be used to determine the controllers to the specified disk array? (Select two.)


Options are :

  • vxlist
  • vxdisk (Correct)
  • vxddladm
  • vxdmpadm (Correct)
  • vxprint

Answer : vxdisk vxdmpadm

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 9

Which setting can only be configured during bootstrap?


Options are :

  • product registration
  • time zone configuration
  • appliance role set up (Correct)
  • system settings configuration

Answer : appliance role set up

Which two conditions are applicable to disks of a disk group that have been destroyed with the vxdg destroy command without re-deploying the disks? (Select two.)


Options are :

  • The destroy operation retains the on-disk disk group ID, which makes the disk group recoverable. (Correct)
  • The destroy operation clears the on-disk disk group name and re-initializes all of the disks.
  • The destroy operation clears the on-disk disk group ID, which makes recovery impossible.
  • The destroy operation deports the disk group and re-formats all of the disks.
  • The destroy operation clears the on-disk disk group name and makes disks available for use in other disk groups. (Correct)

Answer : The destroy operation retains the on-disk disk group ID, which makes the disk group recoverable. The destroy operation clears the on-disk disk group name and makes disks available for use in other disk groups.

Which Veritas File System (VxFS) I/O error policy will place the file system into a degraded state upon a metadata write failure?


Options are :

  • mdisable
  • mwdisable
  • wdisable
  • nodisable (Correct)

Answer : nodisable

250-371 Administration Symantec NetBackup 7.5 Windows Exam Set 1

Which command is required to make changes in I/O policies for multiple paths persistent?


Options are :

  • vxdmpadm (Correct)
  • vxtune
  • vxddladm
  • vxdctl

Answer : vxdmpadm

A disk group with four disks contains a two-column striped and mirrored volume. Which step must be performed first to change the volume to have three columns without losing the redundancy?


Options are :

  • use the vxassist command to convert the volume
  • use the vxdg command to add two disks to the disk group (Correct)
  • use the vxrelayout command to relayout the volume
  • use the vxassist command to relayout the volume

Answer : use the vxdg command to add two disks to the disk group

If a system fails during a volume relayout, what happens to the transformation after the system is restored?


Options are :

  • Transformation is reversed and may have to be repeated manually.
  • Data may become corrupted and may have to be restored from backup.
  • Volume configuration can be restored from config copy backed up by vxconfigdbackupd.
  • Transformation continues after the system is restored (Correct)

Answer : Transformation continues after the system is restored

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Exam Set 6

What is the first action an administrator must take when configuring SmartTier on a newly installed Veritas Storage Foundation 6.1 for UNIX server?


Options are :

  • turn on the file change log (FCL)
  • define placement policies
  • create a volume set (Correct)
  • create placement classes

Answer : create a volume set

When performing a dry run for deduplication, fsdedupadm may take a '-o threshold=percentage' argument. This argument will initiate an actual deduplication run when the metric reaches which given value?


Options are :

  • the percentage of duplicate file names
  • the percentage of file system disk usage
  • the percentage of expected savings (Correct)
  • the percentage of the dry run completed

Answer : the percentage of expected savings

What enables combining disks or LUNs into logical collections to make administration easier?


Options are :

  • volume
  • subdisk
  • plex
  • disk group (Correct)

Answer : disk group

ST0-10X Veritas Storage Foundation 5 for Unix Practice Test Set 6

An administrator is unable to receive output from vxprint, vxdisk list, or other reporting commands but does have access to volumes and file system data. What is the likely cause of this problem?


Options are :

  • vxdctl has stopped running.
  • The disk.info file is corrupt.
  • A disk has failed. (Correct)
  • vxconfigd has stopped running.

Answer : A disk has failed.

Hot-relocation is available for which two types of volume layouts? (Select two.)


Options are :

  • concatenated with hot standby disk
  • striped with hot standby disk
  • striped-mirror (Correct)
  • striped
  • striped with parity (Correct)

Answer : striped-mirror striped with parity

Which option can be selected for the log level from the Veritas Operations Manager (VOM) Management Server setting page?


Options are :

  • Warning (Correct)
  • Notice
  • Error
  • Critical

Answer : Warning

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 6

Which requirement must be met when using the Web Installer to install Veritas Storage Foundation 6.1 for UNIX on multiple systems?


Options are :

  • Only one system can be installed at a time
  • Only the target systems must be running the same operating system
  • The installation server and all target systems must be running the same operating system. (Correct)
  • All systems must be running the same operating system patch level.

Answer : The installation server and all target systems must be running the same operating system.

Which command should be used to manage the contents of volboot?


Options are :

  • vxedit
  • vxdctl (Correct)
  • vxconfigd
  • vxvolboot

Answer : vxdctl

Which Storage Foundation utility is used to generate random read and random write workloads so that the performance of a file system can be analyzed?


Options are :

  • vxbench
  • vxtrace
  • vxstat
  • vmstat (Correct)

Answer : vmstat

250-252 Administration ofVeritas Storage Foundation 6.0 Test Set 6

Which information is required when backing up the system to a remote location using the Control Center?


Options are :

  • the domain, port, and path of the ftp server (Correct)
  • the IP address of the dedicated backup appliance
  • a username and host to facilitate secure copy protocol (SCP) transfer
  • the directory where the compressed backup should be downloaded

Answer : the domain, port, and path of the ftp server

What is the primary purpose of Compliance Folders?


Options are :

  • to block attempts to send confidential information outside the organization
  • to store archived messages
  • to monitor, track, and remediate violations of a policy (Correct)
  • to provide access to the document storage repository to monitor potential policy violations

Answer : to monitor, track, and remediate violations of a policy

A disk has been initialized for use in Veritas Volume Manager (VxVM). Which command is used to create a disk group named datadg on a device shown as device_tag and using a disk media name of datadg01?


Options are :

  • vxdginitdatadg datadg01=device_tag (Correct)
  • vxdginitdatadgdevice_tag=datadg01
  • vxdg setup datadg datadg01=device_tag
  • vxdg define datadgdevice_tag=datadg01

Answer : vxdginitdatadg datadg01=device_tag

250-253 Administration of Veritas Cluster Server 6.0 Test Set 1

A snapshot is created under the command vxassistsnapstart and successfully completes. The server is subsequently rebooted. What is the snapshot plex state after the server has come completely online?


Options are :

  • SNAPCOMPLETE
  • SNAPATT
  • SNAPRECOVER
  • SNAPDONE (Correct)

Answer : SNAPDONE

A system administrator needs to optimize the use of solid state disks in a data center by automatically allocating them to files that are frequently accessed and that require high throughput. Using Veritas Operation Manager (VOM) to configure SmartTier, which Canned File Placement Policy should be configured to optimize the use of solid state disks?


Options are :

  • Update age-based
  • Access age-based
  • I/O activity-based (Correct)
  • Access age-based with preferred files

Answer : I/O activity-based

An administrator needs to provide storage for a critical database application that maximizes both database performance and protection against data loss. Which storage configuration should the administrator select?


Options are :

  • RAID-1
  • RAID-0+1
  • RAID-0
  • RAID-1+0 (Correct)

Answer : RAID-1+0

ST0-10X Veritas Storage Foundation 5 for Unix Practice Test Set 5

On which two areas on the Control Center can you view license expiration status? (Select two.)


Options are :

  • On the Alerts page
  • On the Control Center Dashboard (Correct)
  • On the Licenses page (Correct)
  • On the License Summary Report

Answer : On the Control Center Dashboard On the Licenses page

Which command is used to change the default thin reclaim schedule?


Options are :

  • vxdefault (Correct)
  • vxtune
  • vxdmptune
  • vxdmpadm

Answer : vxdefault

Which is a predefined pattern available with a Premium Content Control subscription?


Options are :

  • social security number
  • valid social security number (Correct)
  • ABA routing numbers
  • US phone number

Answer : valid social security number

ST0-085 Symantec Security Information Manager 4.7 Technical Set 7

Which two fields must be configured to identify the LDAP server? (Select two.)


Options are :

  • Host (Correct)
  • Name (Bind DN)
  • Username
  • Port (Correct)
  • Password

Answer : Host Port

By default, how many times will Dynamic Multi-Pathing (DMP) retry a failed I/O request for a single path?


Options are :

  • 2
  • 5 (Correct)
  • 3
  • 4

Answer : 5

What is a valid deduplication chunk size?


Options are :

  • 32K (Correct)
  • 256K
  • 2K
  • 1K

Answer : 32K

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 8

When should an administrator use the remount option with the mount command on a local Veritas File System (VxFS)?


Options are :

  • if the file system was accidentally unmounted
  • after a file system corruption
  • to mount the file system in multiple places
  • when updating mount options (Correct)

Answer : when updating mount options

An administrator suspects that file creation performance is degraded in several directories on a Veritas File System (VxFS). Which command should be used to analyze directory organization?


Options are :

  • fsadm (Correct)
  • fsapadm
  • fiostat
  • fsppadm

Answer : fsadm

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions