ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 5

Every command prevents the Veritas Volume Manager disk space allocation DISK_8 when volumes are created without specifying a plate division?


Options are :

  • None
  • vxedit reserve DISK_8
  • vxdisk on the reserve = DISK_8
  • vxdisk reserve DISK_8
  • vxedit the reserve = on DISK_8

Answer : vxedit the reserve = on DISK_8

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 8

When the output from vxdisk -o list command alldgs no entries DISK and GROUP columns. However, you will see the output of the network in the Status column. What online status indicate? (Choose three.)


Options are :

  • at this time the disk is not addressed to the disk array.
  • The disc is currently being imported from another system.
  • The disc is formatted.
  • The disc is currently expelled from another machine
  • The disc is the free pool.

Answer : at this time the disk is not addressed to the disk array. The disc is formatted. The disc is the free pool.

Which command is used to view datadg disk group configuration that should be restored from a backup?


Options are :

  • None
  • vxconfigrestore -C datadg
  • vxconfigrestore -p datadg
  • vxconfigrestore -v datadg
  • vxconfigrestore -l datadg

Answer : vxconfigrestore -p datadg

Datadg disk group is defined as a default disk group system. the name of which disk group should be specified with vxdctl defaultdg command clears the default?


Options are :

  • nulldg
  • None
  • rootdg
  • bootdg
  • nodg

Answer : nodg

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 7

Which command is used to determine the amount of unallocated disk space for all groups?


Options are :

  • None
  • vxdg free
  • vxdg list
  • vxdg -o alldgs list
  • vxdg -o alldgs for free

Answer : vxdg free

Wear command to start the daemon configuration on the troubleshooting at the highest level?


Options are :

  • vxconfigd -k -x 9
  • vxconfigd -r -d 9
  • vxconfigd -k -d 9
  • vxconfigd -d 9
  • None

Answer : vxconfigd -k -x 9

Every vxassist parameter is used to set the size of the volume of tracks on the track?


Options are :

  • stsize
  • stripeunit
  • stripecolsize
  • stripesize
  • None

Answer : stripeunit

ST0-10X Veritas Storage Foundation 5 for Unix Practice Exam Set 4

The new Veritas File System is needed that will give very quickly writings of many large files, most of which are larger than 2 GB. Write performance is a top priority. Which two file system tasks would be the best way to accomplish this? (Choose two.)


Options are :

  • -F vxfs mount / dev / vx / dsk / datadg / o datavol fsize g = 2, large files / data
  • mkfs -F vxfs / dev / vx / rdsk / datadg / datavol bsize = o 8192, large files
  • #NAME?
  • mkfs -F vxfs / dev / vx / rdsk / datadg / datavol bsize = o 2048, large files
  • #NAME?

Answer : mkfs -F vxfs / dev / vx / rdsk / datadg / datavol bsize = o 8192, large files #NAME?

What are the advantages of using logic-in-time copy (PITC)? (Choose two.)


Options are :

  • Storage space is needed, is the same regardless of disk size.
  • PITC is the first complete copy of the primary data.
  • PITC may be divided into a different position.
  • Possibly less storage space is needed.
  • PITC is available immediately.

Answer : Possibly less storage space is needed. PITC is available immediately.

Each conversion right is used to convert a RAID 0 + 1 volume of a layered volume?


Options are :

  • mirror-polished finishing stripe Concatenate
  • mirror-stripe stripe-mirror
  • mirror-mirror-connect the daisy chain
  • stripe-mirror mirror-stripe
  • None

Answer : mirror-stripe stripe-mirror

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 10

Before you create a group using the new disk VEA SAN environment, it is recommended that you_____.


Options are :

  • Run the refresh SAN disk group functions Tools
  • Double-click the disk group icon
  • Use a new disk group task, select Actions VEA?> SAN?> The new disk group
  • Seeking re-operation to upgrade the VEA view
  • None

Answer : Seeking re-operation to upgrade the VEA view

When using the VEA, the two products can be clicked on the mouse to create a volume? (Choose two.)


Options are :

  • Basic Group
  • host
  • enclosures
  • Groups plate
  • plates

Answer : Groups plate plates

After a system crash and reboot, all plexes has a volume that is marked Plex active state, but also marked Plex kernel mode disabled data collected the_____ task.


Options are :

  • vxconfigd back
  • None
  • vxvol resync
  • vxresync back
  • vxiod resync

Answer : vxvol resync

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 9

Keep track of changes and file system directories to improve the performance of the search engine application, which Veritas File System feature do you use?


Options are :

  • The aim Log
  • file change history
  • quotas file
  • Object location table file
  • None

Answer : file change history

Each menu lists the discs disk group that contains a copy of the configuration database?


Options are :

  • vxdg disk group listconfig
  • vxdg list disk group
  • vxdg disk group listdb
  • vxdg list metadata disk group
  • None

Answer : vxdg list disk group

The plate removed from the plate group with the following command: vxdg -g datadg rmdisk datadg01 disk space is _____.


Options are :

  • Away
  • foreign
  • invalid
  • Online
  • None

Answer : Online

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 4

Datavol volume has been created, but the volume of content has not yet been initialized. Volume datavol is what state?


Options are :

  • None
  • BLANK
  • NEEDSYNC
  • NEEDINIT
  • INSIDE OF IT

Answer : BLANK

for Emergency Restoration, data is mirrored between two locations in chips. Read the policy to make sure that the local system retrieves data from a local site?


Options are :

  • None
  • local
  • choose
  • Read pages
  • rather

Answer : Read pages

Which Veritas Volume Manager command to permanently remove the disc Volume Manager control?


Options are :

  • vxdg DEPORT
  • vxvolunsetup
  • vxdiskunsetup
  • vxdisk init
  • None

Answer : vxdiskunsetup

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 9

Each command can be used to display the default disk group?


Options are :

  • vxdctl defaultdg
  • None
  • vxdg list
  • vxdg defaultdg
  • vxdctl listdefault

Answer : vxdg defaultdg

Every command to change the volume read policy to force the Volume Manager to read from each plex is mirrored volume datavol datadg group on the disc?


Options are :

  • vxvol -g datadg rdpol Round Robin datavol
  • vxedit datadg set to g = rdpol Round Robin datavol
  • vxedit -g datadg plurality rdpol = round datavol
  • vxvol -g datadg rdpol round datavol
  • None

Answer : vxvol -g datadg rdpol round datavol

What are the different modes vxconfigd daemon? (Choose three.)


Options are :

  • in use
  • defective
  • Disabled
  • stopped
  • started

Answer : in use Disabled started

ST0-91W Symantec NetBackup 7.0 for Windows Practice Exam Set 2

In datavol volume has two plexes, as well as a disabled / CLEAN mode. What command would plexes and volumes available?


Options are :

  • vxvol start datavol
  • vxvol set datavol = ON
  • None
  • vxedit start datavol
  • vxedit set datavol = ON

Answer : vxedit start datavol

Every command creates a RAID-5 volume, in connection with which there is a log?


Options are :

  • vxassist -g datadg do datavol layout = RAID5 addlog Nco I = 3
  • vxassist -g datadg do datavol layout = RAID5 Nco I = 3
  • vxassist -g datadg do datavol layout = RAID5 raid5log Nco I = 3
  • None
  • vxassist -g datadg do datavol layout = RAID5 rlog Nco I = 3

Answer : vxassist -g datadg do datavol layout = RAID5 Nco I = 3

Every three functions does the vxassist utility used to do? (Choose three.)


Options are :

  • Creating volumes
  • Creating mirrors
  • Configuring DMP
  • reconfiguring volumes
  • reconfiguring the Daylight Saving Time rules

Answer : Configuring DMP reconfiguring volumes reconfiguring the Daylight Saving Time rules

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 11

Wear command displays the current I / O parameters of the Veritas file system?


Options are :

  • vxprint
  • None
  • vxprintfs
  • vxtunefs
  • vxfstune

Answer : vxtunefs

What are the two advantages layered, vs. a non-layered, volumes? (Choose two.)


Options are :

  • improved disk space usage
  • greater flexibility
  • improved write performance
  • lower complexity
  • faster recovery time

Answer : greater flexibility faster recovery time

Every volume status indicates that the volume resynchronization waiting for?


Options are :

  • CONVOSYNC
  • DELAYSYNC
  • None
  • SYNC
  • NEEDSYNC

Answer : NEEDSYNC

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 1

What is the result of the command vxdg -n -tC appldg import datadg?


Options are :

  • Datadg disk group forcibly brought under a new name appldg, if the import of locks exist, in which case the import will fail.
  • Datadg disk group temporarily ground with the new name appldg and import locks are cleared on imports.
  • Appldg disk group temporarily ground with the new name datadg and import locks are cleared on imports.
  • Appldg disk group will be renamed datadg and forcibly brought to the new host.
  • None

Answer : Datadg disk group temporarily ground with the new name appldg and import locks are cleared on imports.

When using Veritas Volume Manager, which is the correct definition of RAID 1 + 0?


Options are :

  • None
  • The mirrors are striped reading performance and simplicity.
  • Data and parity stripes are mirrored read performance and flexibility.
  • The track data is reflected in the number of performance and flexibility.
  • The track data is mirrored with a parity write performance and recovery.

Answer : The track data is reflected in the number of performance and flexibility.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions