ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 8

When architecting Coordination Point (CP) server into a Veritas Cluster Server (VCS) environment, what should be done to ensure the CP service remains online?


Options are :

  • ensure that the CP server is on a reliable network
  • configure multiple CP server instances on the same node
  • configure CP server as a resource in a VCS cluster
  • ensure that the CP server is backed up regularly

Answer : configure CP server as a resource in a VCS cluster

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 12

The failover service group named websg is FROZEN and is ONLINE/PARTIAL in a two-node cluster. The power is unplugged from the system on which websg is ONLINE/PARTIAL. Consider the configuration file below: group wewbsg ( SystemList = { sym1 = 1, sym2 = 2 } AutoFailover = 1 AutoStartList = { sym1, sym2 } Parallel = 0) What will be the state of websg on the surviving system?


Options are :

  • AutoDisabled
  • OFFLINE
  • FROZEN
  • ONLINE/PARTIAL

Answer : OFFLINE

Which two actions must be taken to upgrade an application under Veritas Cluster Server control? (Select two.)


Options are :

  • Verify that the new version is supported with haagent -verify
  • Freeze the application service group
  • Freeze the application resources
  • Stop the application agent on all systems
  • Verify that the application agent supports the new version

Answer : Freeze the application service group Verify that the application agent supports the new version

An administrator adds a new user within a cluster that is running in a non-secure mode. In which file will the user name be stored?


Options are :

  • /etc/VRTSvcs/conf/config/secure.cf
  • /opt/VRTSvcs/conf/config/users.cf
  • /etc/VRTSvcs/conf/config/types.cf
  • /etc/VRTSvcs/conf/config/main.cf

Answer : /etc/VRTSvcs/conf/config/main.cf

ST0-247 Symantec Cluster Server 6.1 for UNIX Certifate Exam Set 3

Which two triggers can only be enabled at the resource level? (Select two.)


Options are :

  • resrestart
  • resfault
  • resadminwait
  • resstatechange
  • resnotoff

Answer : resadminwait resnotoff

What is the impact to unsaved configuration changes in Veritas Cluster Server when an administrator stops the cluster with a force option from the command-line interface?


Options are :

  • Changes are prompted to be discarded.
  • Changes are prompted to be saved.
  • Changes are automatically discarded.
  • Changes are automatically saved.

Answer : Changes are automatically discarded.

What is one function of a Network Discover scanner?


Options are :

  • It scans an organization's network to identify Network Discover targets
  • It specifies the types of repositories that can be scanned.
  • It collects content and metadata from a variety of repositories.
  • It sends collected content to the Enforce Server for processing.

Answer : It collects content and metadata from a variety of repositories.

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 5

Which method encrypts the Oracle password on the Enforce Server?


Options are :

  • Data Encryption Standard (DES)
  • Secure Socket Layer (SSL)
  • Rivest, Shamir, Adleman (RSA)
  • Advanced Encryption Standard (AES)

Answer : Advanced Encryption Standard (AES)

There is a two-node Veritas cluster with two independent heartbeat connections, and fencing is disabled. What happens when one of the heartbeat connections is lost?


Options are :

  • The cluster will be fully functional, but will be unsupported
  • The cluster will take all service groups offline until both heartbeats are restored.
  • The cluster will automatically configure a low-pri heartbeat over the public net.
  • The cluster will disable service group failover on system fault.

Answer : The cluster will disable service group failover on system fault.

Which VCS resource attribute setting prevents VCS from interpreting a Monitor entry point timeout as a resource fault?


Options are :

  • FaultMonitor=240
  • MonitorFault=0
  • MonitorFaultTimeout=240
  • FaultOnMonitor=4

Answer : FaultOnMonitor=4

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 3

An administrator needs to set up a service group dependency with the following characteristics: The parent group depends on the child group being online on the same system. If the child group faults, the parent group should be taken offline. If the parent group faults, then the child group should go offline. Which type of dependency is this?


Options are :

  • Online global firm
  • Online local firm
  • Online local hard
  • Online global soft

Answer : Online local hard

Which Veritas Cluster Server command should be used to change OnlineRetryLimit for all Mount resources?


Options are :

  • haattr
  • haagent
  • hatype
  • hagrp

Answer : hatype

Which command should be used to view keyless licenses on a Veritas cluster?


Options are :

  • vxkeyless
  • vxkeydisplay
  • vxlicdump
  • vxkeylist

Answer : vxkeyless

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 5

Which directive in the llttab file defines a network interface for a heartbeat?


Options are :

  • Heartbeat
  • Nic
  • Hbdev
  • Link

Answer : Link

During a test of a NIC resource the VCS engine log indicates that the service group and the IP resource enter the FAULTED state on all systems in the cluster. The NIC resource enters the ONLINE state after the root cause of the fault is corrected. Which default attribute setting allows the service group to attempt to start without manual intervention?


Options are :

  • AutoClear
  • AutoRestart
  • AutoStart
  • AutoFailover

Answer : AutoRestart

Which types of monitoring can be performed on Oracle resources? (Choose two.)


Options are :

  • Detail monitoring
  • Basic level monitoring
  • Service monitoring
  • Kernel level monitoring
  • Specific monitoring

Answer : Detail monitoring Basic level monitoring

ST0-237 Symantec Loss Prevention Technical Practice Exam Set 2

Two resources of type Process named web1proc and web2proc are configured in the failover websg service group and are online on the sym1 cluster node. The web2proc resource is linked as dependent on the web1proc resource, and the Critical resource attribute of the web2proc is modified from the default value. Resource restart is set to the default value. What are the states of the web1proc and web2proc resources on the sym1 cluster node after shutting down the process managed by the web2proc from outside of Veritas Cluster Server?


Options are :

  • web1proc is faulted, and web2proc is offline.
  • web1proc is online, and web2proc is online
  • web1proc is online, and web2proc is faulted.
  • web1proc and web2proc are both faulted.

Answer : web1proc is online, and web2proc is faulted.

Which conditions are recommended for a successful VCS patch installation? (Choose two.)


Options are :

  • GAB and LLT must be shut down on all cluster nodes.
  • VCS must be shut down on all cluster nodes
  • The clustered application must be shut down.
  • GAB and LLT must remain running and connected.
  • VCS must be shut down only on the server being patched.

Answer : GAB and LLT must be shut down on all cluster nodes. VCS must be shut down on all cluster nodes

Which three protocols are system-configured and are recognized by Network Monitor by their individual signatures? (Select three.)


Options are :

  • IM: AIM
  • TFTP
  • IM: ICQ
  • NNTP
  • FTP

Answer : IM: AIM NNTP FTP

251-312 Administration Symantec Backup Exec 12 Windows Exam Set 3

Where can an incident responder find the exact location of the file copy created by the Protect: Copy File response action?


Options are :

  • in the Incident Snapshot
  • in the Discover Target configuration
  • in the System Event
  • in the Marker File

Answer : in the Incident Snapshot

An administrator is manually adding a node named sym3 to an existing two-node cluster. What must be done after installing Veritas Cluster Server and configuring cluster communications on the new node?


Options are :

  • Run hasys -force sym3 on the new node
  • Run hastart -add sym3 on any node
  • Run hastart on the new node
  • Run haclus -addnode sym3 on the new node

Answer : Run hastart on the new node

A two-node Veritas Cluster with I/O fencing configured has two service groups running, one on each node. What happens when all heartbeat links are lost simultaneously?


Options are :

  • All service groups fault and shut down.
  • All service groups remain where they are.
  • All nodes race for the coordinator disks, and one node panics.
  • All nodes race for the data disks, and one node panics.

Answer : All nodes race for the coordinator disks, and one node panics.

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 2

What is commonly observed during the Notification phase of Risk Reduction?


Options are :

  • improved business processes
  • improved employee communication
  • more business unit involvement
  • a significant drop in incident volume

Answer : a significant drop in incident volume

What should an administrator do when the License Key expires?


Options are :

  • Edit the key in the Protect.properties file
  • Enter a new key on the Advanced Settings page
  • Edit the key in the VontuManager.conf file
  • Enter a new key on the System Settings page

Answer : Enter a new key on the System Settings page

Which resource type attributes can be set in order to tune VCS failover characteristics? (Choose two.)


Options are :

  • OfflineTimeout
  • OfflineMonitorInterval
  • Flags
  • RestartLimit
  • ToleranceLimit

Answer : RestartLimit ToleranceLimit

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Exam Set 11

What is a function of the Enforce Server?


Options are :

  • detects incidents
  • deploys agents to endpoint computers
  • writes incidents to all detection servers
  • provides a GUI for policy creation

Answer : provides a GUI for policy creation

VCS is to be installed in a secure environment where remote installation between systems is impossible. The VCS configuration parameters were captured in a file using the installation script on the first system. What can be used to read the contents of the configuration file when executing locally on the remaining systems?


Options are :

  • #NAME?
  • #NAME?
  • #NAME?
  • #NAME?

Answer : #NAME?

Which components are installed when you execute the installvcs script? (Choose two.)


Options are :

  • Cluster file system
  • Gab driver
  • Cluster volume manager
  • Database agents
  • Bundled agents

Answer : Gab driver Bundled agents

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 11

What is the sequence of message processing for Network Monitor?


Options are :

  • Packet Capture -> File Reader -> Incident Writer
  • Incident Persister -> File Reader -> Manager
  • Incident Persister -> Manager -> Notifier
  • Detection -> Packet Capture -> Incident Writer

Answer : Packet Capture -> File Reader -> Incident Writer

Which attributes impact service group failover? (Choose three.)


Options are :

  • FailOver
  • AutoFailOver
  • Frozen
  • Faulted
  • FaultPropagation

Answer : AutoFailOver Frozen FaultPropagation

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions