ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 10

Given the partial main.cf definition: group GroupA ( SystemList = { SystemA = 0, SystemB = 1, SystemC = 2, SystemD = 4 } AutoStartList = { SystemA, SystemD } OnlineRetryLimit = 3 OnlineRetryInterval = 120) GroupA is online on SystemA. All other systems are up and available. Where will GroupA fail over to when SystemA faults?


Options are :

  • SystemD
  • SystemC
  • SystemA
  • SystemB

Answer : SystemB

ST0-237 Symantec Loss Prevention Technical Practice Exam Set 12

During a failover, what attribute determines where the service group will go online?


Options are :

  • Critical
  • TakeOverPolicy
  • FailOverPolicy
  • AutoFailOverPolicy

Answer : FailOverPolicy

What are valid user categories in VCS? (Choose three.)


Options are :

  • Domain Administrator
  • Cluster Power User
  • Enterprise User
  • Cluster Guest
  • Cluster Operator
  • Group Operator

Answer : Cluster Guest Cluster Operator Group Operator

Cluster1 is being merged into Cluster2. All the appropriate network heartbeat links are in place. The merged cluster keeps the name and ID of Cluster2. On which cluster(s) will LLT need to be restarted?


Options are :

  • Cluster1
  • Cluster2
  • Both clusters
  • Neither cluster

Answer : Cluster1

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 7

Proxy resources can reference which type of resources? (Choose three.)


Options are :

  • NIC
  • ElifNone
  • IP
  • FileOnOff
  • FileOnOnly

Answer : NIC ElifNone FileOnOnly

What can be used to install VCS on remote systems using the provided install script? (Choose two.)


Options are :

  • http
  • ftp
  • rsh
  • ssh
  • rcp

Answer : rsh ssh

How would you determine the minimum RAM required to run a VCS cluster?


Options are :

  • Check user guide
  • Run installvcs -precheck
  • Check install guide
  • Run installvcs -ramcheck

Answer : Check install guide

251-312 Administration of Symantec Backup Exec 12 for Exam Set 3

Assume that the GroupA service group is online on SystemB. Given the following configuration file: group GroupA ( SystemList = { SystemA = 1, SystemB = 2 } AutoStartList = { SystemA } ) IP ip0 ( Device = nic0 Address = "10.10.10.10" NetMask = "255.255.255.0" ) NIC nic0 ( Device = nic0 NetworkType = ether ) NIC nic1 ( Device = nic1 NetworkType = ether ) ip0 requires nic0 What happens to the GroupA service group if the network cable connected to nic0 is unplugged on SystemB?


Options are :

  • GroupA faults on SystemB and attempts to restart on SystemB.
  • The nic0 resource faults and GroupA stays partially online.
  • GroupA faults on SystemB and attempts to fail over to SystemA.
  • IP traffic is rerouted to the nic1 interface

Answer : GroupA faults on SystemB and attempts to fail over to SystemA.

What is the default level of authorization of a new VCS user?


Options are :

  • Group Operator
  • Cluster Operator
  • Cluster Guest
  • Cluster Administrator
  • Group Administrator

Answer : Cluster Guest

Which directive is used in /etc/llttab to define a low-priority link?


Options are :

  • Link-lowpri
  • lowpri
  • Link
  • lowpri-link

Answer : Link-lowpri

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 3

While in Jeopardy, the system with the ONLINE GroupA service group crashes. Which GroupA attribute is set on the surviving systems?


Options are :

  • AutoDisabled
  • AutoStart
  • FAULTED
  • STALE_ADMIN_WAIT

Answer : AutoDisabled

Which system is unsuitable for use in a multinode cluster? System S1: one local drive three network interfaces access to shared storage multiple processors two HBAs System S2: two mirrored local drives three network interfaces access to shared storage a single processor two HBAs System S3: two mirrored local drives three network interfaces access to shared storage multiple processors one HBA System S4: two mirrored local drives three network interfaces multiple processors two HBAs


Options are :

  • System S4
  • System S1
  • System S2
  • System S3

Answer : System S4

Which files can you use to recreate a corrupt main.cf configuration file? (Choose two.)


Options are :

  • main.cf.previous
  • types.cf.previous
  • main.cmd
  • types.cf
  • main.cmd.previous

Answer : main.cf.previous main.cmd

ST0-91W Symantec NetBackup 7.0 for Windows Practice Exam Set 1

You are installing a VCS upgrade that does not require a system reboot, but does require a VCS restart. Which method maximizes user access to the clustered applications during the upgrade?


Options are :

  • Stop VCS using the all option and then restart VCS on each system
  • Evacuate service groups while upgrading one system at a time
  • Use the VCS rolling upgrade option which restarts VCS transparently
  • Stop VCS using the orce option and then restart VCS on each system

Answer : Stop VCS using the orce option and then restart VCS on each system

If the host name is changed in the sysname file, which other files need to be modified? (Choose three.)


Options are :

  • llthosts
  • types . cf
  • llttab
  • main . cf
  • gabtab

Answer : llthosts llttab main . cf

A PostOnline trigger is being tested on a three-system cluster with system named SystemA, SystemB, and SystemC. The trigger works on SystemA, but it fails to run on SystemB and SystemC. What is a possible reason for this?


Options are :

  • The PostOnline attribute is set to false on SystemB and SystemC.
  • The hatrigger script must be run on all systems to enable the PostOnline trigger.
  • The PostOnline trigger is missing from SystemB and SystemC.
  • The VCS engine had an error while replicating the trigger to SystemB and SystemC.

Answer : The PostOnline trigger is missing from SystemB and SystemC.

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 8

How would you enable the setting of different values for the Device attribute of the NIC resource named NetNIC?


Options are :

  • hares -local NetNIC Device
  • hares -onlinelocal NetNIC Device
  • hares -localize NetNIC Device
  • hares -enable NetNIC Device

Answer : hares -local NetNIC Device

What is a required attribute of a service group?


Options are :

  • SystemList
  • AutoStartList
  • AutoStart
  • SystemStartList

Answer : SystemList

For which VCS feature is configuration optional during the install using installvcs?


Options are :

  • I/O Fencing
  • Bundled Agents
  • Notification
  • Perl

Answer : Notification

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 6

Given a service group where FailOverPolicy=Load, which system attribute does HAD use to determine the failover target?


Options are :

  • Prerequisites
  • Load
  • Capacity
  • AvailableCapacity

Answer : AvailableCapacity

An application is started and stopped using custom scripts and consists of a single running daemon process. Which type of resource is recommended to cluster this application?


Options are :

  • Application
  • Program
  • Process
  • Init

Answer : Application

The hastatus command shows the systems are in STALE_ADMIN_WAIT. What causes this?


Options are :

  • The configuration was not closed before restarting HAD.
  • The main.cf is different on the systems in the cluster.
  • There is a syntax error in the main.cf configuration file
  • There is a main.stale file in the configuration directory.

Answer : There is a syntax error in the main.cf configuration file

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 5

How do you add the admin account to receive notification?


Options are :

  • Modify the notifier SmtpRecipients attribute while online
  • Modify the SmtpRecipients attribute and restart the notifier
  • Edit SmtpRecipients in the main.cf file of the active cluster
  • Run the notifier [email protected] l=Warning command

Answer : Modify the SmtpRecipients attribute and restart the notifier

Given the partial main.cf definition: cluster VCS1 ( UserNames = { admin = ElmElgLimHmmKumGlj, Administrators = { admin } CounterInterval = 5 ) system S1 ( ) system S2 ( ) VCS1 has two private heartbeat links. During the tests, both heartbeat links were unplugged simultaneously. What could be added to the configuration to prevent split-brain condition?


Options are :

  • HeartBeat service group
  • I/O Fencing
  • FireDrill
  • Quorum disk

Answer : I/O Fencing

What will happen to the notifier if it is correctly configured and the system on which it is running in a multisystem VCS cluster fails?


Options are :

  • The notifier will go offline.
  • The notifier will fail over and run on another system.
  • The notifier will be faulted.
  • The notifier is in a parallel service group, it will already be running elsewhere.

Answer : The notifier will fail over and run on another system.

ST0-237 Symantec Loss Prevention Technical Assessment Exam Set 7

What can a system administrator do to ensure that Veritas Volume Manager volumes are started by the Volume resource rather than the DiskGroup resource?


Options are :

  • Change the service group so that it excludes the DiskGroup resource
  • Change the default value of the StartVolumes attribute of the DiskGroup agent
  • Create a dependency from the DiskGroup resource to the Volume resource
  • Make sure that all VCS volumes are present in /etc/vfstab

Answer : Change the default value of the StartVolumes attribute of the DiskGroup agent

Which VCS bundled agent can be used to mirror the state of a NIC resource to another service group?


Options are :

  • Shadow
  • Proxy
  • IPMultiNIC
  • Phantom

Answer : Proxy

You need to remove a service group named Group A. You have already removed all resources from the group. Which command do you use to remove the group?


Options are :

  • hagrp elete group GroupA
  • hagrp elete GroupA
  • hagrp emove GroupA
  • hagrp emove group GroupA

Answer : hagrp elete GroupA

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 2

What is the first step you should take to upgrade the operating system on a VCS node?


Options are :

  • Start the upgrade process
  • Shut down VCS on all nodes
  • Freeze the service groups
  • Migrate online service groups

Answer : Migrate online service groups

Which VCS utility is used to verify a configuration to load a configuration file at run time?


Options are :

  • haconf
  • haverify
  • haload
  • hacf

Answer : hacf

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions