ST0-10X Veritas Storage Foundation 5 for Unix Practice Test Set 4

While troubleshooting the Storage Foundation 5. 0 environment in your organization, you discover that a disk group is disabled. You need to run the vxconfigrestore command to restore the disk group. In this situation, which switch will you use to perform a precommit analysis of the state of the disk group configuration?


Options are :

  • Use the -l switch
  • Use the -c switch
  • Use the -p switch
  • Use the -d switch

Answer : Use the -p switch

You are responsible for managing and monitoring the Storage Foundation 5. 0 environment in your organization. You notice that VxFS is not performing at an optimal level. You decide to run the fsadm utility. How will the fsadm utility help you resolve this problem?


Options are :

  • Defragment VxFS
  • Remount VxFS and administer it for changes
  • Check and repair VxFS
  • Administer VxFS File Change Logs.

Answer : Defragment VxFS

An incorrectable I/O error has occurred on a RAID volume due to a disk failure that caused the data on the disk to become unavailable. For the RAID volume, the subdisk becomes unavailable and is considered stale and detached. What is the RAID level in the volume in this situation?


Options are :

  • 4
  • 5
  • 2
  • 0

Answer : 5

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Exam Set 2

You are monitoring the Storage Foundation 5. 0 environment in your organization. A disk starts receiving intermittent I/O errors and shows signs of hardware fatigue. All the data on the disk is redundant; however, in this situation, you cannot interrupt I/O. How should you resolve this error?


Options are :

  • Copy the volume to another disk.
  • Add a new drive and wait for it to populate.
  • Move all the subdisks to healthier disks.
  • Force the subdisks to move to a stripped volume.

Answer : Move all the subdisks to healthier disks.

You are managing Storage Foundation 5. 0 server in your organization. When working on Veritas Enterprise Administrator Server, you are prompted with an error message "VxVM Provider initialization warning: vxinstall has not been run." What should you do to resolve this problem?


Options are :

  • Reconfigure Veritas Enterprise Administrator.
  • Restart the Veritas Enterprise Administrator.
  • Install Volume Manager
  • Configure Volume Manager and Initialize.

Answer : Configure Volume Manager and Initialize.

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 1

You are attempting to install Storage Foundation 5. 0 on a server that has SUSE Linux Enterprise Server 9. 0 installed on it. When you initiate the installation, it fails. You must ensure that installing Storage Foundation 5. 0 has minimum impact on the server. What should you do to install Storage Foundation 5. 0 on the server?


Options are :

  • Upgrade the existing operating system to SUSE Linux Enterprise Server 10.0.
  • Upgrade the existing operating system with SP 3.
  • Change the operating system to Red Hat Fedora 4.
  • Change the operating system to Solaris 9

Answer : Upgrade the existing operating system to SUSE Linux Enterprise Server 10.0.

You have installed Storage Foundation for DB2. You need to create a multi-mirror snapshot. When you attempt to add the second mirror and the data change object (DCO) log, db2ed_vmchecksnap fails. What could be the probable cause?


Options are :

  • All tagged snapshot mirrors are in the SNAPDONE state
  • Newly added mirror is not tagged with the same tag as the first mirror
  • Snap volumes are not splittable.
  • The SNAPSHOT_MIRROR keyword to the snapplan has not been added.

Answer : Snap volumes are not splittable.

While performing disk operation under Volume Manager Control, you will execute the command vxassist -g mktdg make mktvol 10g. What will be the output of this command?


Options are :

  • The command will create default disk group.
  • The command will create a sub disk in a disk group
  • The command will create a volume in a disk group.
  • The command will create boot disk group.

Answer : The command will create a volume in a disk group.

251-312 Administration of Symantec Backup Exec 12 for Exam Set 5

You execute the qio_convertdbfiles command to convert the database files to use Quick I/O. The command results with an error that the database files are not on a VxFS file system. You need to convert the database files to use Quick I/O. What should you do?


Options are :

  • Set the database type to DB2.
  • Run the qio_getdbfiles command to get the database files on the VxFS file system.
  • Predefine the DB2 environment variable $DB2DATABASE.
  • Remove the files from the mkgio.dat file.

Answer : Remove the files from the mkgio.dat file.

What is the default naming format for a plex?


Options are :

  • volume_name-xx
  • volumename-xx
  • volume_namexx
  • volumenamexx

Answer : volume_name-xx

When you are administrating Veritas Volume Manager on the Solaris platform, you want to remove a disk using vxdiskunsetup command from the Veritas Volume Manager without erasing the VxVM metadata on the disk. What is the necessary step you need to do before running the command in the scenario and to prevent a data loss?


Options are :

  • Move data using Veritas Volume Manager
  • Data on the disk should be evacuated from the disk.
  • Disable a disk group before you remove a disk
  • You need to encapsulate the disk.

Answer : Data on the disk should be evacuated from the disk.

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 3

You are administering the Veritas Volume Manager. While working on the Veritas Volume Manager, you execute the vxprint -hvt command. What will be the outcome of the command?


Options are :

  • Command will list the stopped volume and its plexes information.
  • Command will display the volume information.
  • Command will list the free Plexes information.
  • Command will display the general information for all sub disks.

Answer : Command will display the volume information.

You have installed Storage Foundation 5. 0 on the Unix platform and need to add licenses. You want to ensure that the licenses are correctly installed on the system. What should you do?


Options are :

  • Add the vxlicrep package.
  • Add the VRTSspt package.
  • Add the VRTSvlic package.
  • Add the valistat package.

Answer : Add the VRTSvlic package.

While working under Veritas Volume Manager, you want to put a disk under the Veritas Volume Manager control. You execute the command vxdiskadd c0t1d0. What is the result of this command?


Options are :

  • The command encapsulates the second disk on the first controller
  • The command checks for the disks can be encapsulated.
  • The command initializes second disk on the first controller.
  • The command puts first disk under VxVM control on the first controller.

Answer : The command initializes second disk on the first controller.

ST0-135 Symantec Network Access Controls Technical Exam Set 7

You were running Storage Foundation 5. 0 on an evaluation license. Two days back, the evaluation license expired. You want to retain the configuration of the existing system. You want a solution that requires minimum administrative effort. What should you do?


Options are :

  • Back date the system and continue using it.
  • Replace the evaluation key with a permanent license key.
  • Obtain another evaluation key and replace it with the existing one.
  • Reinstall Storage Foundation with another evaluation key.

Answer : Replace the evaluation key with a permanent license key.

You have initialized a disk under VxVM control on a UNIX platform. You want to make it accessible on other operating systems. What changes does VxVM make to the disk so that the disk is accessible to the operating systems?


Options are :

  • It changes the format of platform-specific data structures on the physical disk.
  • It formats the VxVM disk with the Cross-platform Data Sharing (CDS) layout.
  • It makes the underlying physical devices inaccessible.
  • It preserves user data on the physical disk.

Answer : It formats the VxVM disk with the Cross-platform Data Sharing (CDS) layout.

Which object is used to initialize a file system for application use?


Options are :

  • A partition
  • A subdisk
  • A partition
  • A volume

Answer : A volume

ST0-237 Symantec Data Loss Prevention 12 Technical Test Set 12

After you install Veritas Enterprise Administrator to manage Storage Foundation 5. 0, you attempt to start the Veritas Enterprise Administrator, but are prompted with an error "Veritas VM Storage Administrator Server Terminated. Stopping Veritas VM Storage Administrator Server ### Terminated." How do you solve this problem?


Options are :

  • Enable the VMSA auto-start mode and restart.
  • Restart the Volume Manager Storage administrator (VMSA) Server.
  • Restart Veritas Enterprise Administrator.
  • Disable the VMSA auto-start mode and restart.

Answer : Disable the VMSA auto-start mode and restart.

You have installed the Veritas Enterprise Administrator to manage Storage Foundation 5. 0. You want to manage the Veritas Enterprise Administrator from remote system using the Graphical User Interface (GUI). What services must be running on the remote system? (Select two.)


Options are :

  • vea
  • vxservice
  • vxsvc
  • vxsvcctrl
  • vxconfigd

Answer : vxsvc vxconfigd

You are managing a Storage Foundation 5. 0 using Storage Foundation Management Server on Solaris 10. You need to manage hosts with different domain names from the Storage Foundation Management Server. What should you do?


Options are :

  • Modify the nsswitch.conf in the /etc directory.
  • Modify the system in the /etc directory
  • Modify the hosts file in the /etc directory.
  • Modify the resolv.conf in the /etc directory.

Answer : Modify the resolv.conf in the /etc directory.

250-405 Administration of Symantec Management Platform Exam Set 4

Modify the system in the /etc directory


Options are :

  • The command verifies the Fully Qualified Host Name.
  • The command verifies the status of Authentication Broker.
  • The command verifies the status of Root Broker.
  • The command verifies the status of Symantec Authentication service.

Answer : The command verifies the status of Symantec Authentication service.

You are installing the Storage Foundation Management Server 1. 0 in Storage Foundation 5. 0 Environment. What resource you require before installing?


Options are :

  • IP address of the host
  • Authentication Broker and Management Server not set to same UC/UTC
  • Type of File System
  • Fully Qualified Host Name of the system

Answer : Fully Qualified Host Name of the system

Which RAID-levels are the parts of Data Redundancy layout? (Each correct Answer presents part of the solution. Select three)


Options are :

  • RAID-0+1
  • RAID-0
  • RAID-1
  • RAID-1+0
  • RAID-5

Answer : RAID-0+1 RAID-1 RAID-5

ST0-91W ST0-91W Symantec NetBackup 7.0 For Windows Exam Set 9

You have Storage Foundation 5. 0 installed on Solaris 10. When managing Storage Foundation 5. 0 from Storage Foundation Management server, you get an error "The action agent has stopped running. Rule manager is no longer available. " You need to resolve this error immediately. What should you do?


Options are :

  • Restart the agent.
  • Restart the Storage Foundation Management Server.
  • Reinstall the agent.
  • Reconfigure the agent.

Answer : Restart the agent.

You want to implement Storage Foundation Enterprise in your storage environment. You want to ensure you have at least 5 GB of free space after the Storage Foundation 5. 0 has been installed on your computer. You are installing Storage Foundation on the same drive where the operating system has been installed. What should be the size of the system drive to meet the requirement?


Options are :

  • 6524 MB
  • 6287 MB
  • 5922 MB
  • 6245 MB

Answer : 5922 MB

You are the administrator for Veritas Volume Manager. You are resizing a device by reducing the size of the device, which has a volume configured on it. However, when you attempt to reduce the size, the resize operation fails. You want to ensure you are able to reduce the size of the device. What should you do? (Each correct Answer presents a unique solution.)(Select two.)


Options are :

  • Add the Storage Foundation license for LUN expansion
  • Move the volume
  • Replace the disk with a disk of different size
  • Reduce the size of the volume

Answer : Move the volume Reduce the size of the volume

ST0-237 Symantec Data Loss Prevention 12 Technical Test Set 3

You have planned to implement Storage Foundation Basic in pre-production environment. You identify a server that has the following configuration: Operating System: SUSE Linux Enterprise Server 9 with SP3. Number of CPUs: 4. Memory: 1 Gigabyte. Disk Space: 40 GB with 25 GB free. When you begin the installation, it fails with an error. What could be a probable cause?


Options are :

  • You need to increase the memory in the system.
  • You have exceeded the maximum number of VxVM volumes
  • You have exceeded the maximum CPUs in the server.
  • You need to upgrade the operating system to SUSE Linux Enterprise Server 10.

Answer : You have exceeded the maximum CPUs in the server.

You are working on Storage foundation for DB2. You create a file system and you want to mount the file system to enable a Quick I/O. However, you are not able to mount the file system. What could be a probable cause? (Each correct Answer presents part of the solution. Select two.)


Options are :

  • The mount point path is not an absolute path name.
  • The Quick I/O is not licensed.
  • You are not logged in as a root user.
  • The file system is read-only.

Answer : The mount point path is not an absolute path name. You are not logged in as a root user.

After installing Veritas Enterprise Administrator, you start the VEA with the profile name that you have specified. When you click the Console View, what does it display? (Select two.)


Options are :

  • Volume Summary
  • Active Events
  • Disk History
  • Alerts

Answer : Active Events Alerts

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 1

When working on Storage Foundation 5. 0 from Storage Foundation Management Server 1. 0, you get an error "Could not connect to central server. Central server may not be running. Given the following steps: 1. Start Veritas Private Branch Exchange. 2. Stop the Management server Web applications. 3. Start the Database and Domain Controller. 4. Stop all agents and the Database. 5. Start the Management Server Web Applications. 6. Start VxPAL Agents. Identify the correct sequence of steps to solve the problem?


Options are :

  • 4, 2,5,3,2,6
  • 3, 4,6,2,1,5
  • 5, 4,1,2,6,3
  • 3, 1,4,2,6,5

Answer : 3, 1,4,2,6,5

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions