251-312 Administration Symantec Backup Exec 12 Windows Exam Set 5

The backup administrator is given the responsibility to protect the remote site that contains the server 30 TB of storage capacity by 10%. Management mandates that a backup administrator to develop a backup strategy, with the primary goal of a rapid recovery. To achieve this, a backup administrator to purchase high-capacity tape library, the independent status of the DVD-RW drive. The backup administrator also ensure specify a backup Backup toDisk folder to the destination device. To achieve rapid recovery, which is the backup device should be used when creating a backup job?


Options are :

  • Backup-to-Disk folder
  • DVD-RW UDF packet writing support
  • None
  • Large-capacity tape library
  • Independent drive

Answer : Backup-to-Disk folder

What are the three functions of the device configuration wizard? (Choose three.)


Options are :

  • Create a backup-to-Disk folder
  • Specifies the robotic library drives
  • Install tape device drivers
  • Edits properties of Backup-to-Disk folder
  • Determine hot-swap device drivers

Answer : Create a backup-to-Disk folder Specifies the robotic library drives Install tape device drivers

Where the media series feature determines how long the data can be added to a piece of media?


Options are :

  • Overwrite protection period
  • Connect Period
  • None
  • retention
  • Media update period

Answer : Connect Period

Disk space charge is configured in disk space threshold 2 GB all backup toDisk (B2D) folders. What is the expected behavior of Symantec Backup Exec 12 for Windows Servers (Backup Exec) media server when it reaches the threshold of disk space?


Options are :

  • All active jobs to complete B2D folder and B2D folder is set to offline.
  • All active jobs is B2D folder to the queue and scheduled backup jobs remain on schedule.
  • None
  • All active jobs is B2D folder canceled scheduled backup jobs remain scheduled
  • All active jobs to complete B2D folders and scheduled backup jobs remain on schedule.

Answer : All active jobs is B2D folder to the queue and scheduled backup jobs remain on schedule.

The backup administrator finds out that some of the backup jobs that ran on the tape have failed, but all backup jobs that ran successfully to disk. What action can the backup administrator to perform backup jobs to ensure the use of all available devices?


Options are :

  • Create a shared media pool
  • Create a device pool
  • None
  • Take a drive sharing
  • Enable device replacement option

Answer : Create a device pool

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 7

Which encryption algorithm is used for Symantec Backup Exec 12 for Windows Servers?


Options are :

  • None
  • Federal Information Processing Standard (FIPS)
  • Triple Data Encryption Standard (3TDES)
  • Advanced Encryption Standard (AES)
  • Data Encryption Standard (DES)

Answer : Advanced Encryption Standard (AES)

Two Backup-to-Disk (B2D) folders placed in the device pool called Levy ackup pool. What happens when the first backup folder runs out of free space?


Options are :

  • None
  • The oldest backup is deleted to make room for other backup.
  • The work extends to the next B2D folder and complete the backup.
  • The work is on hold until the status is available in the folder.
  • Work will fail with a "lack of free disk space" error.

Answer : The work extends to the next B2D folder and complete the backup.

Every Symantec Backup Exec 12 for Windows Servers wizard can be seen in the attached iSCSI media server?


Options are :

  • Hot-swappable device wizard
  • iSCSI Wizard
  • Disk identification of the Wizard
  • Disk Discovery Wizard
  • None

Answer : Hot-swappable device wizard

Those two processes can transfer media files from a place offline back online? (Choose two.)


Options are :

  • Scan robot
  • Create an import job
  • Warehouse offline media
  • Catalog offline media
  • Remove the media and the warehouse robot

Answer : Scan robot Warehouse offline media

What happens to existing Backup Exec 12 for Windows Servers (Backup Exec) working model when the corresponding encryption key is removed?


Options are :

  • Backup Exec asks for a replacement as soon as the encryption key for each model
  • Backup Exec asks for a replacement of the encryption key when the work is based on the vulnerability of models are run.
  • None
  • Backup Exec automatically switches the models unencrypted state.
  • Backup Exec asks for a replacement of the encryption key when the work is based on the vulnerability of designs created.

Answer : Backup Exec asks for a replacement as soon as the encryption key for each model

Where is the reset button located on the cleaning statistics?


Options are :

  • General tab of the Drive Properties window
  • Under the Cleaning tab window Drive Properties
  • Less than after the device properties by right-clicking Devices
  • Tools of the device and media operations tab
  • None

Answer : Under the Cleaning tab window Drive Properties

250-371 Administration Symantec NetBackup 7.5 Windows Exam Set 2

Two non Backup Exec 12 for Windows Servers create survive from an offsite? (Choose two.)


Options are :

  • offsite rules
  • Vault rules
  • Backup model rules
  • export Companies
  • Media vaults

Answer : Vault rules Media vaults

What a setting prevents the Backup-to-Disk folder using all the available disk space to run?


Options are :

  • Low disk space threshold
  • The available space threshold
  • High disk space threshold
  • None
  • Disk capacity threshold

Answer : Low disk space threshold

What are the two ways of Symantec Backup Exec 12 for Windows Servers (Backup Exec) encryption keys can be transferred to Media Media ServerA ServerB? (Choose two.)


Options are :

  • Create new keys Media ServerB using the original passphrase
  • Exports of encryption keys to media server and bring the volume ServerB
  • Copy the encryption key file in a media server Media ServerB
  • Use the Central Administration Server Option to synchronize encryption keys
  • Restore Backup Exec media server database Media ServerB

Answer : Create new keys Media ServerB using the original passphrase Restore Backup Exec media server database Media ServerB

Media moved to the online location of the offline location. Every effect is on the move to Settings Connect the season (AP) and overwrite protection period (OPP), the material goes offline location?


Options are :

  • AP OPP and accept the settings for offline media location.
  • AP OPP and return to the OEM defaults.
  • OPP will be returned to the infinite Do not let overwrite mode.
  • None
  • AP OPP and the media remain in force.

Answer : AP OPP and the media remain in force.

Which two wizards Backup Exec does not provide for adding memory slots media server? (Choose two.)


Options are :

  • Device Setup Wizard
  • backup Wizard
  • IDR Wizard
  • Hot Swap Device Wizard
  • policy Wizard

Answer : Device Setup Wizard Hot Swap Device Wizard

Re-retrieval company has a server farm 30 TB of storage 10% capacity. Information Technology Management Group to develop a backup strategy. The primary objective is to support backups of the entire server farm capacity with the least media. To meet these needs, the IT team to invest in high-capacity tape library, independent drive and DVD-RW UDF packet writing support. IT team also sets up a Backup-to-Disk folder.To to achieve the primary objective, which is the backup device is best used when creating a backup job?


Options are :

  • None
  • 4mm stand-alone drive
  • DVD-RW UDF packet writing support
  • Cascaded drive pool
  • Large-capacity tape library

Answer : Large-capacity tape library

ST0-237 Symantec Loss Prevention Technical Practice Exam Set 12

A plurality of stand-alone tape drives, all of the same type is attached to the media server, but none of them has enough capacity to perform regular backups without extend over several tracks. The operation of which makes it possible to run regular backups to tape without having someone on site to manually switch to ribbons?


Options are :

  • Create a Standard appliance pool and add to it each independent tape drive
  • Create a Backup-to-Disk device pool and more each separate tape drive to
  • Create a Cascaded device pool and add to it each independent tape drive
  • None
  • Create a virtual machine pool for each tape drive and then manually load backups

Answer : Create a Cascaded device pool and add to it each independent tape drive

Symantec Backup Exec 12 for Windows Servers (Backup Exec) is installed on a Windows 2000 Server. How to backup administrator to verify that the Symantec tape device drivers for the device is installed?


Options are :

  • None
  • Devices watch Backup Exec, right-click the tape device, and click Properties
  • In Windows Explorer, go to the program FilesExecfolder
  • Tape Drives, click the Windows Device Manager and check the driver's provider
  • Windows registry, go to HKEY_Local_MachineExec

Answer : Tape Drives, click the Windows Device Manager and check the driver's provider

Which one time only cleaning method is invoked by Symantec Backup Exec 12 for Windows Servers administrator?


Options are :

  • tape Alert
  • None
  • run now
  • Clean now
  • manual

Answer : manual

Including two default system media sets, Symantec Backup Exec 12 for Windows Servers? (Choose two.)


Options are :

  • retired Media
  • Online Media
  • Media catalog
  • Scratch Media
  • Offline Media

Answer : retired Media Scratch Media

A high degree of fragmentation of the disc has become a problem on the disk that contains a backup to disk (B2D) folders. Every change can be made, Symantec Backup Exec 12 for Windows Servers mitigate future fragmentation?


Options are :

  • Enable the option "allocate file size for B 2D files"
  • None
  • B 2D to reduce the size of files
  • Reduce the concurrent operations permitted B 2D files
  • Removes the option "Maximum file size: B 2D files appropriations"

Answer : Enable the option "allocate file size for B 2D files"

The backup administrator wants to block all the distributed and introduced into the media from being overwritten unless the scratch is transferred to the media set. Every Media Overwrite Protection level should implement a backup administrator to configure?


Options are :

  • Size
  • Complete
  • None
  • Nothing
  • Blank

Answer : Size

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 4

The target for the backup device settings has failed and must be replaced. The operation of which makes this possible?


Options are :

  • Changes the device and the Media settings the default properties for this job in Job Monitor
  • Deletes the job and create a new one using the original selection list
  • Device and modify the default settings for all the media work in the global settings
  • Change device settings, and Media Properties of the labor work regulations
  • None

Answer : Change device settings, and Media Properties of the labor work regulations

Symantec Backup Exec 12 for Windows Servers (Backup Exec) is installed successfully, but physically attached to autonomous tape drive does not appear within the Backup Exec administration console. The tape drive is displayed in the Microsoft Windows 2003 Device Manager under the tape devices branch. Two steps to resolve this problem? (Choose two.)


Options are :

  • Make sure that the tape drive is the Backup Exec Hardware Compatibility List
  • Start the Backup Exec Server service, and then use the Windows Device Manager to look for new devices
  • Right-click devices tree Backup Exec, and select Scan for New Devices
  • Take the tape drive manufacturer to confirm whether the updates are required for the tape drive firmware
  • Windows' Device Manager, check to see if the device SCSIchanger service is running and restart the service if it does not start

Answer : Make sure that the tape drive is the Backup Exec Hardware Compatibility List Take the tape drive manufacturer to confirm whether the updates are required for the tape drive firmware

What is the default setting for simultaneous operations to a Backup-to-Disk folder?


Options are :

  • 16
  • 2
  • None
  • 10
  • 1

Answer : 1

The two tape drives (drive1 and drive2) attached to the media server is placed in the Tape Pool device pool. Three time backups handled in the same time period designated Tape Pool. The first two backups are allocated to two tape drives. To which the device is the third in a backup job is written?


Options are :

  • None
  • Drive2
  • Drive1
  • The first available drive
  • All Devices pool

Answer : The first available drive

As the backup administrator to use the encryption key instead of restricted common encryption key?


Options are :

  • Limits the encryption using a key
  • Limits the encryption and decryption using the key
  • None
  • Limits the encryption using a key
  • To limit the export of encryption key

Answer : Limits the encryption using a key

A single tape drive robotic library attached to Symantec Backup Exec 12 for Windows Servers (Backup Exec) media server but fails displayed in the Backup Exec Devices window. The library is below the right place at the robot Libraries tree, but instead of listing to run underneath it is a list of Unknown Drive. The drive name is listed in the Independent stations. What should be done to solve this problem?


Options are :

  • Run the Backup Exec Device Configuration Wizard and drag the correct drive name under the position robotic library
  • Power down the Backup Exec server and the robot attached to the library, then the library starting the robot before starting the Backup Exec server.
  • Start the Backup Exec Server service and searching for new devices in Windows Device Manager.
  • None
  • Because the robotic library does not unserialized and does not support Backup Exec, switch to a supported robotic library robotic library

Answer : Run the Backup Exec Device Configuration Wizard and drag the correct drive name under the position robotic library

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 2

Monthly model policy must be a priority on a weekly basis model of the same policy. The backup administrator wants to create a model rule to determine this ahead. How to backup administrator to determine the model of the rule?


Options are :

  • The policy window, click the New Rule
  • The rules window, click the Add
  • Job screen shield values of the New Rule File menu
  • None
  • The policy window, click Edit Template, and then click New Rule

Answer : The policy window, click the New Rule

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions