250-352 Administration of Storage Foundation and HA 6.0 Test Set 2

A cluster administrator has a service group that repeatedly gets resource faults. The cluster administrator needs to gather logs to determine what is happening on the server at the time of the failure. The cluster administrator would like to use the manage faults service group attribute. What are two valid settings for the ManageFaults service group attribute? (Select two.)


Options are :

  • None
  • FALSE
  • All
  • 1
  • 0
  • TRUE

Answer : None All

ST0-237 Symantec Data Loss Prevention 12 Technical Test Set 10

Which service group dependency permits a parent group to be brought online when the child group is offline?


Options are :

  • online remote
  • online local
  • offline remote
  • offline local

Answer : offline local

How can two separate Veritas Cluster Server clusters share a common heartbeat network?


Options are :

  • All LLT node IDs must be unique across the clusters.
  • Quorum disks must be unique across the clusters
  • Cluster IDs must be unique across the clusters.
  • GAB network IDs must be unique across the clusters.

Answer : Quorum disks must be unique across the clusters

Refer to the service group definition displayed below. group SG1 ( SystemList = { SystemA, SystemB } AutoStartList = { SystemA } ) FileOnOff tmp_file01_txt ( PathName = "C:\\tmp\\file01.txt" ) Which service group attribute should an administrator consider for Veritas Cluster Server (VCS) to ignore resource failures within the service group SG1?


Options are :

  • ManageFaults
  • ManualOps
  • IntentOnline
  • Responding

Answer : ManageFaults

ST0-91W Symantec NetBackup 7.0 for Windows Practice Exam Set 3

Microsoft Exchange Server 2007 is clustered using Veritas Storage Foundation and High Availability Solutions 6.0 for Windows and the mailbox database is set to mount on start up. The database state is displayed as dismounted on the primary node of the cluster. Which attribute must be set to ensure that the service group fails over to the secondary node?


Options are :

  • ResFaultPoilcy
  • FaultOnMountFailure
  • ToleranceLimit
  • FaultOnMonitorTimeout

Answer : FaultOnMountFailure

Which task is out of scope when dealing with the functionality of the Recovery Point Browser in Symantec Backup Exec System Recovery 8.5?


Options are :

  • restoring folders
  • mounting a recovery point
  • adding files to a recovery point
  • viewing encryption strength

Answer : adding files to a recovery point

Which Symantec Backup Exec System Recovery Manager 8.5 (BESR 8.5) component must be installed on each BESR 8.5 Agent for centralized management?


Options are :

  • Indexing Server
  • Management Control
  • Management Console
  • LightsOut Restore

Answer : Management Control

250-400 Administration Altiris Client Management Suite Exam Set 2

Which two attributes impact service group failover? (Select two.)


Options are :

  • AutoFailOver
  • FailOver
  • FaultPropagation
  • Probed
  • Faulted

Answer : AutoFailOver FaultPropagation

Which tool is used to verify that the configuration meets all software and hardware requirements?


Options are :

  • VxExplorer
  • Configuration Checker
  • Windows Data Collector
  • hagetcf

Answer : Windows Data Collector

Which three license editions are available for Symantec Backup Exec System Recovery 8.5? (Select three.)


Options are :

  • Advanced Server Edition
  • Server Edition
  • Desktop Edition
  • Essential Business Server Edition
  • Small Business Server Edition

Answer : Server Edition Desktop Edition Small Business Server Edition

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 8

A two-system cluster has two independent heartbeat connections as the only heartbeat mechanisms. What happens when one of the heartbeat connections is lost?


Options are :

  • Veritas Cluster Server automatically configures a low-pri heartbeat over the public net.
  • Service group failover is disabled on system fault
  • Veritas Cluster Server automatically marks all service groups auto-disabled.
  • Service group failover functions normally on system fault.

Answer : Service group failover is disabled on system fault

A city-wide power failure caused a data center to power down all systems. An organization has a three node cluster and one node failed to start after the power was restored. The network administrator noticed that a critical business application is unavailable and has determined that the cause is that the cluster is in a waiting state. It is critical to get the business application started immediately. What can the administrator do to force the cluster to start on one of the working nodes?


Options are :

  • gabconfig -cx
  • hacf -verify
  • hastart -all
  • net start vcscomms

Answer : gabconfig -cx

An organization is upgrading all network switches in its data center. Per standard operating procedures, the administrator shut down all systems in the data center. After the switches were upgraded, the servers were restarted. However, a two node cluster was in a waiting state after the servers were restarted. Which command can the administrator run to help determine whether the heartbeat network is running properly?


Options are :

  • ipconfig
  • gabconfig -a
  • lltstat -H
  • hacf -verify

Answer : gabconfig -a

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Exam Set 12

An administrator changes the default value for Process agent attributes RestartLimit to 2 and ConfInterval to 180. The Process resource faulted and Veritas Cluster Server (VCS) restarted the resource. The Process resource faults again after surviving a stable online period of 4 minutes. VCS restarts the resource. How will VCS behave if the Process resource fails again after surviving a stable online period of 2 minutes?


Options are :

  • VCS offlines the resource.
  • VCS faults the resource.
  • VCS restarts the resource.
  • VCS waits for user intervention.

Answer : VCS restarts the resource.

Both Microsoft Windows (NTFS) and Symantec Backup Exec System Recovery 8.5 (BESR 8.5) can create recovery points. Which two recovery point characteristics apply to BESR 8.5 as opposed to NTFS? (Select two.)


Options are :

  • Recovery points are unusable for restore if the volume gets corrupted
  • Recovery points are created using the System Recovery feature.
  • Recovery points can be saved to a different location.
  • Recovery points are created for the entire volume or specific files.
  • Recovery points are saved on the same volume by default.

Answer : Recovery points can be saved to a different location. Recovery points are created for the entire volume or specific files.

What is a benefit of an active/active cluster configuration?


Options are :

  • Applications with different I/O and memory requirements run on the same system properly.
  • Each server is configured to run a specific application.
  • Multiple applications that run on the same system always co-exist properly.
  • Applications only run on a primary server

Answer : Each server is configured to run a specific application.

ST0-085 Symantec Security Information Manager 4.7 Technical Set 1

Which two tasks are performed by the rolling upgrade wizard during the upgrade process? (Select two.)


Options are :

  • evacuates online service groups
  • backs up configuration data
  • upgrades nodes without rebooting
  • assigns temporary cluster ID
  • performs pre-installation checks

Answer : evacuates online service groups assigns temporary cluster ID

Which application can be installed to allow central monitoring of recovery point status for Windows Servers, desktops, and laptops across an entire organization, all from a single console?


Options are :

  • Symantec Backup Exec System Recovery 8.5 Monitor
  • Symantec Backup Exec System Recovery Manager 8.5
  • Symantec Backup Exec System Recovery 8.5 Agent
  • Symantec Backup Exec System Recovery 8.5 Client

Answer : Symantec Backup Exec System Recovery Manager 8.5

When a critical resource faulted, Veritas Cluster Server (VCS) attempted to restart a faulted service group on the same system on which the group faulted instead of failing over the service group to the next available node. Which two attributes does an administrator need to consider for a normal failover operation of a service group? (Select two.)


Options are :

  • OnlineRestartLimit
  • OnlineRestartInterval
  • OnlineNumRetries
  • OnlineRetryLimit
  • OnlineRetryInterval

Answer : OnlineRetryLimit OnlineRetryInterval

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 13

Which option to gabconfig explicitly defines the number of systems that are necessary to seed the cluster?


Options are :

  • #NAME?
  • #NAME?
  • #NAME?
  • -c

Answer : #NAME?

What is required to make a fileshare highly available?


Options are :

  • The fileshare must be created first.
  • The fileshare wizard must be run on the active node.
  • The volumes must be mounted to a mountpoint.
  • The fileshare wizard must be run on an inactive node.

Answer : The fileshare wizard must be run on the active node.

250-270 Administration of Symantec NetBackup 7.0 Unix Test Set 2

For which three applications could Symantec Backup Exec System Recovery 8.5 leverage Volume Shadow Copy Service (VSS)? (Select three.)


Options are :

  • Microsoft Virtual Server
  • Microsoft Active Directory
  • Microsoft Exchange 2000
  • Microsoft Exchange 2007
  • Microsoft SQL 2008

Answer : Microsoft Active Directory Microsoft Exchange 2007 Microsoft SQL 2008

Which two options are correct for expanding a 1GB striped volume with two columns to a 2GB volume? (Select two.)


Options are :

  • Add 2 1GB disks to the disk group and expand the volume using the max-size option
  • Add 4 256MB disks to the disk group and expand the volume using the max-size option
  • Add 1 1GB disk to the disk group and expand the volume using the max-size option
  • Add 4 512MB disks to the disk group and expand the volume using the max-size option
  • Add 2 512MB disks to the disk group and expand the volume using the max-size option

Answer : Add 4 256MB disks to the disk group and expand the volume using the max-size option Add 2 512MB disks to the disk group and expand the volume using the max-size option

What is the default Veritas Cluster Server Web console service group?


Options are :

  • ClusterService
  • ClusterWeb
  • WebService
  • WWWService

Answer : WWWService

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 9

Which requirement must be met when implementing a Veritas Cluster Server (VCS) environment?


Options are :

  • The processors in every clustered node must be the same make, model, and architecture.
  • The disks must be SCSI-3 compliant and accessible by all clustered nodes.
  • Clustered applications must be able to restart to a known state after a failure.
  • Clustered resources must be able to run simultaneously across all cluster nodes.

Answer : Clustered applications must be able to restart to a known state after a failure.

Which file extension is used for file and folder backup files?


Options are :

  • .V2i
  • .FBF
  • .FFB
  • .iV2i

Answer : .FBF

Which feature creates simultaneous, multiple, split-mirror copies of volumes?


Options are :

  • mirroring
  • duplication
  • RAID
  • FlashSnap

Answer : FlashSnap

ST0-10X Veritas Storage Foundation 5 for Unix Practice Exam Set 4

Which new feature was introduced with Symantec Backup Exec System Recovery 8.5?


Options are :

  • Custom Recovery Disk Wizard
  • Schedule Virtual to Physical (V2P) Conversion
  • Schedule Physical to Virtual (P2V) Conversion
  • Consolidate Differential Recovery Points

Answer : Schedule Physical to Virtual (P2V) Conversion

Which two are valid options for mirroring a 500GB striped volume created with two 500GB disks? (Select two.)


Options are :

  • add the unallocated space left from each disk in the disk group where the volume resides and mirror the volume
  • add 3 150GB disks to the disk group where the volume resides, select mirror, then select auto select disks
  • add 2 250GB disks to the disk group where the volume resides, select mirror, then select auto select disks
  • add 2 200GB disks to the disk group where the volume resides, select mirror, then select auto select disks
  • add 1 500GB disk to the disk group where the volume resides, select mirror, then select auto select disks

Answer : add 2 250GB disks to the disk group where the volume resides, select mirror, then select auto select disks add 1 500GB disk to the disk group where the volume resides, select mirror, then select auto select disks

With the enhancements to the Custom Symantec Recovery Disk Wizard, which three new options allow users to customize? (Select three.)


Options are :

  • graphic resolution
  • display language
  • user accounts
  • time zone
  • keyboard layout

Answer : display language time zone keyboard layout

ST0-237 Symantec Data Loss Prevention 12 Technical Test Set 5

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions