250-270 Administration of Symantec NetBackup 7.0 Unix Test Set 5

.Which two methods are used to set up disk spanning to allow backups to span multiple BasicDiskstorage units? (Select two.)A. select Host Properties -> Media Servers -> Media -> Allow backups to span disksB. select Storage Units -> Storage Unit -> Allow backup to span disksC. configure a storage unit group and add all disk storage units regardless of media serverD. configure a storage unit group that consists only of disk storage units defined on a single mediaserverE. confirm a Round Robin storage unit is selected at the group level


Options are :

  • AD
  • ED
  • AB
  • DC

Answer : AD

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 6

.An administrator installs two new LTO4 drives in a tape library with two existing LTO3 tape drives.What should the administrator configure next?


Options are :

  • a new storage unit for the LTO4 tape drives
  • an existing storage unit because LTO4 is backwards compatible with LTO3
  • the two new LTO4 tape drives into an existing storage unit with the existing tape drives
  • a new storage unit for each tape drive

Answer : a new storage unit for the LTO4 tape drives

.What does Media Manager do when a volume reaches maximum mounts?


Options are :

  • suspend the tape
  • freeze the tape
  • expire the tape
  • return the tape to scratch pool

Answer : suspend the tape

.What is the maximum number of characters supported for a Media ID?


Options are :

  • 10
  • 8
  • 16
  • 6

Answer : 6

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 5

.Which network setting converts the host name to an IP address if reverse host lookup fails?


Options are :

  • allowed
  • restricted
  • prohibited
  • temporary

Answer : restricted

.A company purchased and installed a new robotic tape library controlled by Symantec NetBackup7.0. This device has been configured in Symantec NetBackup and needs to be tested prior toinitiating any backups. Which command should be run to verify robotic library functionality?


Options are :

  • nbdevquery
  • robtest
  • vmverify
  • libtest

Answer : robtest

.A backup has allocated SQL001 for a SQL backup job from the scratch pool and has assignedthis tape to the NetBackup volume pool. The administrator now needs to move SQL001 to apreviously created volume pool called SQLTapes. How is this accomplished?


Options are :

  • right-click SQL001 and select Change
  • expire SQL001, right-click SQL001 and select Change
  • right-click SQL001 and select Move
  • delete SQL001, right-click SQL001 and select Move

Answer : expire SQL001, right-click SQL001 and select Change

250-352 Administration of Storage Foundation Practice Exam Set 2

.Refer to the exhibit.The administrator is attempting to create a new volume pool called EmptyTapes for theenvironment's scratch tapes.Why is the Scratch Pool checkbox disabled?


Options are :

  • Volume groups are nonexistent.
  • Tape media are nonexistent.
  • The Symantec NetBackup temporary license key has expired.
  • A scratch pool already exists.

Answer : A scratch pool already exists.

.Which action must be performed to add new media to a tape library?


Options are :

  • move Volumes dialog box
  • update volume configuration
  • compare contents with volume
  • import media

Answer : update volume configuration

.A Prioritized storage unit group is configured with two BasicDisk storage units and one tapestorage unit that is configured with three DLT tape drives. What happens if a backup is running onthis storage unit group and one of the two BasicDisk storage units becomes full as the job is beingwritten to it?


Options are :

  • The backup fails because spanning is only allowed on tape storage units.
  • The backup can continue on the other disk storage unit (if available) in the group if "disk spanning" is enabled.
  • The backup continues to a tape on the same media server.
  • The backup continues on another media server if "media server spanning" is enabled and a storage unit is free.

Answer : The backup can continue on the other disk storage unit (if available) in the group if "disk spanning" is enabled.

ST0-237 Symantec Data Loss Prevention 12 Technical Test Set 7

.What is the default media server SCSI reserve setting?


Options are :

  • SPC-3 SCSI reserve
  • SPC-2 SCSI reserve
  • SCSI Persistent reserve
  • SPC-4 SCSI reserve

Answer : SPC-2 SCSI reserve

.Which command must be run to reset the cleaning statistics after manually cleaning the drive?


Options are :

  • tpclean -c
  • tpclean -f
  • tpclean -l
  • tpclean -m

Answer : tpclean -m

.A company needs to update the volume configuration.Which prerequisite must be met before proceeding?


Options are :

  • The robotic library must be configured with a robot type.
  • The robotic library must be TLD.
  • The Symantec NetBackup environment must consist of at least one Media ID generation rule.
  • The robotic library must contain media type HCART.

Answer : The robotic library must be configured with a robot type.

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 4

.Which Symantec NetBackup 7.0 command can be used to move a tape volume to a differentvolume pool?


Options are :

  • vmupdate
  • vmchange
  • bpmedia
  • bpmove

Answer : vmchange

.An administer needs to limit the activity to a disk storage unit. Which setting modification shouldthe administrator implement?


Options are :

  • decrease the Max Concurrent Job setting
  • increase the High Water Mark setting
  • decrease the Max Concurrent Write Drives setting
  • decrease the Low Water Mark setting

Answer : decrease the Max Concurrent Job setting

.An administrator has installed a new Symantec NetBackup 7.0 UNIX media server and hasattached two tape drives. How can the administrator verify that Symantec NetBackup canconfigure the tape drives?


Options are :

  • use the "scan" command
  • install the Symantec tape drivers
  • list the contents of the /dev/rmt folder
  • modify thevm.conf

Answer : use the "scan" command

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 7

.In Symantec NetBackup 7.0 there are currently three storage units (STU-A, STU-B, and STU-C).Only STU-A is set as On Demand Only. Three policies have been created as follows:PolicyA is set up to use storage unit STU-A.PolicyB is set up as an "Any Available" storage unit.PolicyC is set up to use STU-C.If STU-B fills up, and STU-A and STU-C still have available space, what happens to futurebackups for PolicyB?


Options are :

  • Backups will fail with an error message indicating that media is unavailable.
  • Backups will use STU-A.
  • Backups will use STU-C.
  • Backups will remain queued waiting for available space on STU-B.

Answer : Backups will use STU-C.

.An administrator creates a storage lifecycle policy with the following configuration:Use ForStorage UnitRetention PeriodBackupAdvancedDisk12 weeksDuplicationPureDisk11 monthDuplicationTLD_012341 yearUpon saving the policy the administrator receives an error.Which setting should the administrator change to resolve the error?


Options are :

  • change the default "Maximum backup copies"
  • change the second storage unit to TLD tape
  • change the first retention period to 1 month
  • change the default "Maximum number of jobs per client"

Answer : change the default "Maximum backup copies"

.A tape library had the robot replaced and now the robot is reading the barcodes with additionalcharacters. Which rule can be established so that Symantec NetBackup 7.0 uses the originalcharacters?


Options are :

  • MediaID setup
  • MediaID generation
  • MediaID barcode
  • MediaID creation

Answer : MediaID generation

ST0-237 Symantec Data Loss Prevention 12 Technical Test Set 1

.Which action must the administrator perform to direct backups to tape drives using SymantecNetBackup 7.0?A. add new media into the scratch volume poolB. delete this optionC. install Media Manager software on the master serverD. create and configure storage devicesE. install Media Manager software on the EMM server


Options are :

  • DC
  • DA
  • BD
  • DB

Answer : BD

.A request is made to change volume residences. Which two conditions must be met in the volumegroup that is associated with the changes? (Select two.)A. All volumes in a volume group must have the same residence.B. All volumes must have barcode labels.C. All volumes must be assigned to scratch pool.D. All volumes must be vaulted before adding volumes to the group.E. All volumes must have the same media type.


Options are :

  • BC
  • CA
  • AE
  • AD

Answer : AE

Which default Windows Open File Backup method is used during a backup for a newly installedSymantec NetBackup 7.0 Windows 2003 client?


Options are :

  • VERITAS Snapshot Provider (VSP)
  • snapshot provider configured in Global Client Attribute
  • Advanced Open File Option (AOFO)
  • Microsoft Volume Shadow Copy Service (VSS)

Answer : Microsoft Volume Shadow Copy Service (VSS)

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 9

.Cleaning media resides in which volume pool?


Options are :

  • Scratch
  • NetBackup
  • Clean
  • None

Answer : None

.An administrator configures two standalone LTO4 tape drives on a Symantec NetBackup 7.0media server with an existing tape library with an LTO4 drive. How should the administratorconfigure the storage units?


Options are :

  • place the two standalone drives in an existing storage unit with the other LTO4 drives
  • place each standalone drive in its own storage unit
  • place the two standalone drives in a single new storage unit
  • place the two standalone drives in a new storage unit group

Answer : place the two standalone drives in a single new storage unit

.In addition to NetBackup and None, which two are default volume pools in Symantec NetBackup7.0? (Select two.)A. ScratchB. CatalogBackupC. DataStoreD. CleanE. Vault


Options are :

  • DC
  • AD
  • BC
  • CB

Answer : BC

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Exam Set 2

.When changes have been made to devices, which service must be stopped and restarted on themaster server and all affected media servers?


Options are :

  • bpdbm
  • ltid
  • vmd
  • bprd

Answer : ltid

A previously used volume has been inserted into a robot without a barcode reader.Which Symantec NetBackup 7.0 administration console operation should be used to update theslot number of the tape within the robot?


Options are :

  • move
  • change
  • update
  • rescan

Answer : move

If frequency-based cleaning of a drive is desired, which parameter must be set in the SymantecNetBackup 7.0 administration console?


Options are :

  • Cleaning Frequency (In GB)
  • Cleaning Frequency (Between mounts)
  • NONE
  • Cleaning Frequency (Between backups)
  • Cleaning Frequency (In hours)

Answer : Cleaning Frequency (In hours)

ST0-085 Symantec Security Information Manager 4.7 Technical Set 3

.By default, new media is assigned to which volume pool during robot inventory without aconfigured barcode rule?


Options are :

  • CatalogBackup
  • None
  • Scratch
  • NetBackup

Answer : NetBackup

Which two have a media and/or density type? (Select two.)A. barcodesB. robotsC. volume poolsD. drivesE. storage units


Options are :

  • BC
  • DE
  • ED
  • CA

Answer : DE

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions