250-270 Administration of Symantec Net Backup 7.0 Unix Exam Set 1

In which two areas of Symantec NetBackup 7.0 is multiplexing configured? (Select two.)


Options are :

  • master server host properties
  • storage unit configuration
  • policy schedules attributes
  • media server host properties
  • storage unit group configuration

Answer :storage unit configuration policy schedules attributes

251-312 Administration Symantec Backup Exec 12 Windows Exam Set 5

An administrator attempted a catalog backup that failed with Status Code 168: cannot overwrite media, data on it is protected. The administrator determines that this is the correct media and wants to overwrite it. Which two actions can the administrator take to allow the catalog backup to run successfully using the same tape? (Select two.)


Options are :

  • unfreeze the media and move it into a valid catalog backup volume pool
  • configure "allow media overwrite" in the media server's host properties
  • provide the encrypted tape's password to allow it to be overwritten
  • run a long erase on the media without verifying the media label
  • eject the tape from the library and remove the physical write protection

Answer :configure "allow media overwrite" in the media server's host properties run a long erase on the media without verifying the media label

A company recently purchased the Shared Storage Option (SSO) for Symantec NetBackup 7.0. The SSO license has been added to all media servers and the master server. Which two steps should be performed before configuring SSO in Symantec NetBackup? (Select two.)


Options are :

  • runtpconfig to initialize the library
  • run ping to verify connectivity between servers
  • run the Storage Device Wizard to initialize the library
  • runbpclntcmd to verify name resolution
  • runrobtest to verify the library

Answer :run ping to verify connectivity between servers runbpclntcmd to verify name resolution

A job fails with Status Code 96: unable to allocate new mediA. What are two causes of this error? (Select two.)


Options are :

  • The available media is on a media server that is offline.
  • The available media is in a tape device that is down.
  • The available media is in a storage unit that is frozen
  • The available media's density is invalid.
  • The available media's status is suspended.

Answer :The available media's density is invalid. The available media's status is suspended.

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 1

An administrator needs to back up a file system with millions of files in the shortest amount of time. Which option should be used?


Options are :

  • enable "Compression" in the policy
  • enable "Collect True Image Restore" in the policy
  • use theFlashBackup policy type
  • use the AFS policy type

Answer :use theFlashBackup policy type

The nbemmcmd -getemmserver command on a new Symantec NetBackup 7.0 media server produces the error: Failed to initialize EMM connection. Which two steps are used to diagnose the issue? (Select two.)


Options are :

  • run thebpclntcmd -hn command on the EMM server to confirm the master server was able to resolve its own hostname
  • verify that network access to the EMM server is available
  • verify thenbemm and pbx_exchange daemons/services are running on the EMM server
  • telnet from the master server to the media server's VNETD port
  • run thebpmedia -listhost command on the EMM server from the new UNIX media server

Answer :verify that network access to the EMM server is available verify thenbemm and pbx_exchange daemons/services are running on the EMM server

A company has changed the SAN configuration. After reconnecting the robotic tape library to the Symantec NetBackup 7.0 media server, the administrator begins to process backup jobs. Symantec NetBackup times out trying to mount a volume for backup indicating error code 52. What is the cause of this error?


Options are :

  • The device path to the tape drives on the SAN has changed.
  • The robot is reading an incorrect barcode.
  • The device mappings file is corrupt.
  • The robot lacks cleaningmediA.

Answer :The device path to the tape drives on the SAN has changed.

250-254 Administration of Symantec Cluster Server 6.1UN Exam Set 7

Which two commands are used for configuring and managing unified logging? (Select two.)


Options are :

  • vxlogview
  • vxlogcfg
  • vxlogmgr
  • vxullogview
  • vxullogmgr
  • vxullogcfg

Answer :vxlogcfg vxlogmgr

A backup job exits with Status Code 1: the requested operation was partially successful. How is this exit code analyzed?


Options are :

  • by reviewing thebpdbm log file on the master server
  • by reviewing devicemonitor status
  • by reviewing thebpdbjobs log file on the master server
  • by reviewing All Log Entries under Reports on the master server

Answer :by reviewing All Log Entries under Reports on the master server

A job log in Symantec NetBackup 7.0 indicates that a status 84 error occurred. Which two problems can be attributed to this code? (Select two.)


Options are :

  • specified volume pool that is empty
  • inability to communicate with robot control host
  • a tape that iswrite protected
  • defective or dirty drive
  • span media that is disabled for the storage unit

Answer :a tape that iswrite protected defective or dirty drive

250-270 Administration of Symantec Net Backup 7.0 Unix Exam Set 5

A new Symantec NetBackup 7.0 client is installed that must communicate across a firewall to its master/media server. Which Symantec NetBackup process helps reduce the number of ports that must be opened in the firewall?


Options are :

  • PBX
  • vxat
  • bpcd
  • vnetd

Answer :vnetd

Which two logs are used to determine the performance of a backup to a tape drive over the network? (Select two.)


Options are :

  • bpbkar
  • bparchive
  • bptm
  • bplog
  • bpfis

Answer :bpbkar bptm

Which action can be taken to determine the cause of a backup job failing with status code 150?


Options are :

  • view the logs for theNetBackup Tape Manager (bptm) for the timeframe of the failed job
  • talk to the administrator who was logged in to the administration console at the time of the error
  • run a verify job on the tape or disk that was used in the backup job
  • view the logs for theNetBackup Service Monitor (nbsvcmon) for the timeframe of the failed job

Answer :talk to the administrator who was logged in to the administration console at the time of the error

ST0-237 Symantec Loss Prevention Technical Practice Exam Set 2

What is the state of the catalog backup media at the successful completion of a catalog recovery using the Catalog Recovery Wizard?


Options are :

  • Full
  • Suspended
  • Imported
  • Frozen

Answer :Frozen

In a Symantec NetBackup 7.0 environment, a client with the hostname Pluto returns error code 57 whenever the media server requests Pluto to start a backup. The administrator is able to ping Pluto from the media server, then run the command "telnet Pluto bpcd" from the root prompt on the media server. What does this telnet command check?


Options are :

  • whether Pluto has any service listening on thebpcd port
  • whether Pluto meets media server proxy link requirements
  • whether connectivity exists between Pluto and the media server
  • whether Pluto allows remote login viabpcd

Answer :whether Pluto has any service listening on thebpcd port

The Symantec NetBackup Startup and Shutdown commands on UNIX are "netbackup start" and "netbackup stop". What is the default installation directory in which these commands are found?


Options are :

  • /usr/openv/NetBackup/bin
  • /usr/openv/NetBackup/bin/support
  • /usr/openv/NetBackup/bin/goodies
  • /usr/openv/NetBackup/bin/admincmd

Answer :/usr/openv/NetBackup/bin/goodies

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Exam Set 6

What effect does enabling robust logging have on logging in Symantec NetBackup 7.0?


Options are :

  • It enables enhanced verbose detail in logs.
  • It enables log rotation for legacy logs.
  • It enables log size limits of unified logs.
  • It enables logs when an error is encountered.

Answer :It enables log rotation for legacy logs.

A job fails with Status Code 96: unable to allocate new mediA. What are two causes of this error? (Select two.)


Options are :

  • The "Enable unrestricted media sharing for all media servers" has been enabled.
  • The available media is in a scratch volume pool.
  • The available media has expired
  • The "Allow multiple retentions per media" setting has been enabled.
  • The available media has exceeded the maximum mounts.

Answer :The available media has expired The available media has exceeded the maximum mounts.

Every time there is a backup attempt of the client named Alpha, the Symantec NetBackup 7.0 administrator receives a network connectivity error. Which command can be used to help determine if the Symantec NetBackup client service is listening?


Options are :

  • bptestbpcd
  • bpcd
  • bpresolve
  • bpclient

Answer :bptestbpcd

ST0-135 Symantec Network Access Controls Technical Exam Set 1

A company needs to configure storage unit groups in Symantec NetBackup 7.0 to attempt to equally distribute backup jobs among available storage units. Which two storage unit group options satisfy the requirement? (Select two.)


Options are :

  • Failover
  • Round Robin
  • FirstIn First Out (FIFO)
  • Prioritized
  • Media Server Load Balance

Answer :Round Robin Media Server Load Balance

A network administrator sent an email stating that emergency maintenance was required during the night on the network used for backup traffic. Which status code indicates a job was affected by the network maintenance?


Options are :

  • Status Code 11
  • Status Code 84
  • Status Code 58
  • Status Code 150

Answer :Status Code 58

Which Symantec NetBackup 7.0 process is responsible for scheduling backup jobs on the master server?


Options are :

  • bpsched
  • bpjobd
  • nbemm
  • nbpem

Answer :nbpem

ST0-91W Symantec NetBackup 7.0 for Windows Practice Exam Set 5

The master server catalog is being recovered to a new server and the following error is displayed: Please insert the following media and run the volume configuration wizard or the vmupdate command to update the NetBackup database. Host - train1 MediaID - GBP847 Barcode - GBP847S1 In the administration console, barcode GBP847S1 is associated with media ID P847S1. What should be done?


Options are :

  • right-click media ID GBP847 in the administration console and rename it to P847S1, then perform recovery
  • delete the tape and set the barcode rule accordingly, then re-inventory the library and run recovery
  • delete the tape and set the media ID generation rule accordingly, then re-inventory the library and run recovery
  • find the tape labeled P847S1, insert it into the robot, and then perform recovery

Answer :delete the tape and set the media ID generation rule accordingly, then re-inventory the library and run recovery

A company has purchased and installed a new LTO4 tape library. After the installation of the new library and the decommission of the previous library, the administrator notices that the backups are taking longer. How should the administrator resolve this problem?


Options are :

  • edit the device_mappings.txt file
  • edit the values in the nbrb.conf file
  • enable Bare Metal Restore in the backup policies
  • enable multiplexing in the backup policies

Answer :enable multiplexing in the backup policies

Which two logs are useful in troubleshooting backup issues on a Symantec NetBackup 7.0 client? (Select two.)


Options are :

  • tar
  • bpbkar
  • bpbrm
  • bpcd
  • ssm

Answer :bpbkar bpcd

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 2

Which script moves client software to a remote UNIX client from a UNIX master server?


Options are :

  • install_client_files
  • ftp_to_client
  • send_client_files
  • update_client
  • client_config

Answer :install_client_files

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 4

An administrator is installing Symantec NetBackup 7.0 and needs to use AdvancedDisk and Media Server Deduplication. In Symantec NetBackup, what happens if the capacity-based licenses for these features is exceeded?


Options are :

  • The services for these features, such as theNetBackup Deduplication Engine, will stop running.
  • Restores will be allowed, however backups will fail to run.
  • The features will be unaffected and backups will continue to use these disk locations.
  • The storage lifecycle policies will be automatically deactivated.

Answer :The features will be unaffected and backups will continue to use these disk locations.

In a Symantec NetBackup 7.0 environment, where does the image database reside?


Options are :

  • within the master server's Sybase database
  • on the media server
  • within the EMM database
  • on the master server

Answer :on the master server

A company has just expanded the Symantec NetBackup 7.0 environment by adding an additional media server. What is the fastest way to update several hundred Symantec NetBackup clients with the new media server information?


Options are :

  • run theupdate_all_clients script
  • run theadd_media_server_on_clients script
  • specify the new media server in the Backup, Archive, and Restore interface
  • specify the new media server in the client properties

Answer :run theadd_media_server_on_clients script

250-400 Administration of Altiris Client Management Suite Set 3

What is an accurate description of a Symantec NetBackup 7.0 domain?


Options are :

  • all clients owned by multiple master servers
  • all media servers and clients owned by multiple master servers
  • all media servers and clients owned by one master server
  • all master and media servers on the same subnet

Answer :all media servers and clients owned by one master server

An administrator successfully creates a disk pool for Symantec NetBackup 7.0, then attempts to create a new storage unit using the bpstuadd command. In the bpstuadd command, the storage unit name is specified as diskpool1_storageunit-#01. An error message is returned indicating the storage unit name is invalid. How should the storage unit name be modified to fix the problem?


Options are :

  • remove the "#" from the name
  • shorten the name to fewer than twenty characters
  • remove all the numbers from the name
  • remove the "-" from the name

Answer :remove the "#" from the name

An organization has Symantec NetBackup 7.0 client machines with a large number of files distributed across multiple file systems that are being backed up to a library with high-speed tape drives. Which two steps should the administrator take to ensure the greatest number of backup streams are active concurrently? (Select two.)


Options are :

  • select the Enable multiplexing attribute within the storage unit and the policy schedule
  • configure the "Max drives this master" attribute to the number of tape drives that are available within the library
  • select the "Enable multiple data streams" policy attribute and edit the "Maximum jobs per client" master server host property
  • enable the client-side deduplication feature so that only unique data is sent from the client to the media server
  • create a "Media Server Load Balancing" type storage unit group to enable additional backup streams to become active simultaneously

Answer :select the Enable multiplexing attribute within the storage unit and the policy schedule select the "Enable multiple data streams" policy attribute and edit the "Maximum jobs per client" master server host property

ST0-237 Symantec Loss Prevention Technical Practice Exam Set 1

Which two statements are true about the function of the Initiate Import utility in Symantec Netbackup 7.0? (Select two.)


Options are :

  • Phase I requires each tape to be mounted if tape media is used.
  • Phase II lists and creates image files from tape or disk.
  • Phase II imports the backups and creates fragments.
  • Phase Icreates a list of expired images.
  • Phase Ireads and creates image files in the image database.

Answer :Phase I requires each tape to be mounted if tape media is used. Phase Icreates a list of expired images.

A collection of all backup data from a client is assembled into a single stream and written to tape or disk. What is this called?


Options are :

  • backup image
  • backup policy
  • file metadata
  • catalog .f file

Answer :backup image

What is required to perform remote administration or user operations using the NetBackup-Java console?


Options are :

  • a valid LDAP account
  • a valid user on the SymantecNetBackup client machine
  • a valid user in thebp.conf
  • a valid account on the SymantecNetBackup server or client machine

Answer :a valid account on the SymantecNetBackup server or client machine

ST0-237 Symantec Data Loss Prevention 12 Technical Test Set 1

The configuration parameters MIN_GB_SIZE_PER_DUPLICATION_JOB and IMAGE_EXTENDED_RETRY_PERIOD_IN_HOURS are part of the configuration for which feature?


Options are :

  • NetBackup Vault
  • FlashBackup
  • Storage Lifecycle Policy
  • Catalog Replication

Answer :Storage Lifecycle Policy

What is required to install a Symantec NetBackup 7.0 media server?


Options are :

  • an EMM server that is already installed
  • a valid SymantecNetBackup license key
  • a master server that is already installed
  • installed media devices (disk or tape)

Answer :a valid SymantecNetBackup license key

Attempts to remotely install Symantec NetBackup 7.0 client software using the administration console to a new UNIX client fail. Which action resolves this failure?


Options are :

  • enabling the Client Services on the SymantecNetBackup master server
  • adding the master server and root in the .rhosts file in the root directory
  • enabling Authorization Services on the SymantecNetBackup master server
  • adding the MASTER_SERVER= entry to the client'sbp.conf file

Answer :adding the master server and root in the .rhosts file in the root directory

250-400 Administration of Altiris Client Management Suite Set 1

Which two databases are used by Symantec NetBackup 7.0? (Select two.)


Options are :

  • Device
  • Image
  • Media
  • EMM
  • Volume

Answer :Image EMM

An administrator is remotely logged into a Symantec NetBackup 7.0 server via the terminal window and needs to configure robots and drives. Which command should be used to complete the configuration?


Options are :

  • vmconf
  • tpreq
  • tpconfig
  • nbdevconfig

Answer :tpconfig

A Symantec NetBackup 7.0 environment uses a multi-tiered architecture. Which system functions as the top tier?


Options are :

  • master server
  • client
  • enterprise client
  • media server

Answer :master server

ST0-135 Symantec Network Access Controls Technical Exam Set 6

Which two types of information are displayed in the Tape Summary report? (Select two.)


Options are :

  • the number of tapes each client is using
  • the number of tapes that are using compression
  • the number of tapes that are suspended
  • the number of tapes that are offsite
  • the number of tapes that are active

Answer :the number of tapes that are suspended the number of tapes that are active

Which two calculations are required to size the Symantec NetBackup 7.0 catalog for a new installation? (Select two.)


Options are :

  • multiply number of backups per day by number of clients
  • multiply number of files per backup by number of backups per retention period
  • divide number of files by retention period
  • multiply number of files by average length of file names E. divide full backups by retention period

Answer :multiply number of files per backup by number of backups per retention period multiply number of files by average length of file names E. divide full backups by retention period

How long will a failed restore job remain in an Incomplete state prior to being moved to a Done state?


Options are :

  • one day
  • three days
  • until the administrator cancels the restore job
  • seven days

Answer :seven days

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 7

An administrator is removing a media server from a Symantec NetBackup 7.0 environment. Which two actions must be performed prior to shutting down the media server? (Select two.)


Options are :

  • uninstall the media server software from the media server being removed
  • remove the storage unit reference to the media server
  • usebpmedia to migrate media from the old server to another media server
  • usebpmedia to expire the media server images from the older server
  • run a complete backup on the old media server

Answer :remove the storage unit reference to the media server usebpmedia to migrate media from the old server to another media server

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions