250-265 Data Protection Administration UNIX Practice Test Set 5

What is the default location for unified logs?   


Options are :

  • /usr/openv/logs
  • /usr/openv/netbackup/logs
  • /usr/openv/netbackup/bin/logs
  • /usr/openv/bin/logs

Answer : /usr/openv/logs

ST0-237 Symantec Loss Prevention Technical Assessment Exam Set 12

Which statements are true about installing multiple media servers? (Choose two.)A. All media server installations require a server license key.B. All media server installations must be pushed from the master server.C. All media server installations should be performed as root/administrator.D. All media server installations can be pushed from a media server with the same OS.E. All media server installations require a tape drive be configured on the system.



Options are :

  • A,B
  • B,C
  • A,C
  • A,E
  • C,D

Answer : A,C

Which command is used to verify that NetBackup and Media Manager daemons are running?   


Options are :

  • bpdbm -a
  • bpps -a
  • bpbackup -a
  • bpprocess -a

Answer : bpdbm -a

What should you do after Net Backup media server is installed?



Options are :

  • Make sure you have enough disk space for the catalogs.
  • Make sure you have a server license key.
  • Make sure you can communicate with the tape devices.
  • Make sure you have restarted services on the EMM server

Answer : Make sure you can communicate with the tape devices.

ST0-247 Symantec Cluster Server 6.1 for UNIX Certifate Exam Set 4

After successfully installing three UNIX clients, all backups for those clients fail with Status Code 59: access to the client was not allowed. What should the system administrator do to resolve this problem?   


Options are :

  • Reboot the UNIX clients.
  • Restart the master server daemons.
  • Verify that the media server is listed in thebp.conf file
  • Edit the .rhosts file on the client and add the master server name.

Answer : Verify that the media server is listed in thebp.conf file

When installing Net Backup 6.5, which documents should be reviewed before installing theapplication? (Choose three.)A. Release NotesB. HardwareCompatability GuideC. Hardware Supported ListD. Operating SystemCompatability GuideE. Operating System Supported List


Options are :

  • A,B,C
  • B,C,D
  • A,B,D
  • C,D,E

Answer : A,B,D

You review your backup reports and find that last night, a large number of backup jobs failed with status code 196. What could cause this status code? 


Options are :

  • The backup window closed before all backups completed.
  • Heavy network congestion caused timeouts
  • One or more clients failed to respond.
  • The supply of available media was exhausted

Answer : The backup window closed before all backups completed.

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 8

Which processes are found on a NetBackup UNIX client? (Choose three.)A. bpbkarB. bpbrmC. tarD. bpcompatdE. bpcd



Options are :

  • B,C,D
  • C,D,E
  • A,B,C
  • A,C,E

Answer : A,C,E

What is the NetBackup client process on a UNIX server?   


Options are :

  • bpbkar
  • bpbrm
  • bprd
  • bpbkar32

Answer : bpbkar

Which component must be installed before you can complete the Net Backup installation on a master or media server? 



Options are :

  • Net Backup Operations Manager (NOM)
  • Private Branch Exchange (PBX)
  • Authentication (AT)
  • Authorization (AZ)

Answer : Private Branch Exchange (PBX)

ST0-095 ST0-095 Symantec Technical Foundations Security Exam Set 1

In the NetBackup Administration console, where do you specify user administration permissions?   


Options are :

  • None
  • Master Server Properties-->Permissions
  • Master Server Properties-->Authentication
  • Master Server Properties-->Authorization
  • Master Server Properties-->Security

Answer : Master Server Properties-->Authorization

Which NetBackup process is responsible for reading data from the client during a backup?   


Options are :

  • bprd
  • tar
  • bpbkar
  • bpcd

Answer : bpbkar

Attempts to remotely install Net Backup client software on a new UNIX client fail. What arepossible solutions for this problem? (Choose two.)A. Turn on universal access in the /etc/services file.B. Add the user MASTER_SERVER on the client.C. Enter the master server and root in the .rhosts file in the root directory.D. Type the master server's name and IP address in the client'shosts file.E. Update the /etc/inetd file on both machines


Options are :

  • B,C
  • A,B
  • C,D
  • A,E

Answer : C,D

ST0-237 Symantec Data Loss Prevention 12 Technical Test Set 3

Which commands can help resolve NetBackup network problems? (Choose three.)A. pingB. bpverifyC. nbclntcmdD. nslookupE. bpclntcmd


Options are :

  • A,D,E
  • A,B,C
  • B,C,D
  • C,D,E

Answer : A,D,E

Your tape library has just had the robot firmware upgraded and now the robot is reading the bar codes with additional characters. Which rule can be set up to have Net Backup use the same characters as before the firmware upgrade occurred?   


Options are :

  • MediaID generation rule
  • MediaID setup rule
  • MediaID creation rule
  • MediaID barcode rule

Answer : MediaID generation rule

You are performing a disaster recovery of a NetBackup master server to a new system. Anotherperson has configured the system to run the NetBackup database recovery.The recovery is run and you receive the following error message:The following DR media could not be located in NetBackup database.Please insert the following media and run the volume configuration wizard or the vmupdatecommand to update the NetBackup database.You locate the barcode in NetBackup and find the media ID has been set to P847S1. All mediaIDs are in a similar format. The library has 200 tapes and you do not know how many DR tapesyou need. What can you do to guarantee the tapes will be found?


Options are :

  • Note the slot number of GBP847S1, delete it and add it back in manually as media ID GBP847, and then run the recovery.
  • Note the slot number of GBP847S1, delete it and add it back in manually as media ID GBP847, and then run the recovery.
  • Userobtest to mount the media and run the recovery manually.

Answer : Note the slot number of GBP847S1, delete it and add it back in manually as media ID GBP847, and then run the recovery.

ST0-91W Symantec NetBackup 7.0 for Windows Practice Exam Set 2

A recovery of your NetBackup catalogs has failed. Which location contains a log of the recovery?   


Options are :

  • /usr/openv/db/log
  • /usr/openv/netbackup/logs/bprecover
  • /usr/openv/netbackup/logs/user_ops/root/logs
  • /usr/openv/logs (unified logs)

Answer : /usr/openv/netbackup/logs/user_ops/root/logs

What is the name of the Netbackup service running after installation of a Windows client?   


Options are :

  • NetBackup Windows Service
  • NetBackup Client Service
  • NetBackup Remote Service
  • NetBack File System Service

Answer : NetBackup Client Service

Which Symantec shared component is required for the installation of NetBackup OperationsManager?



Options are :

  • Symantec Private Authentication Service
  • Symantec Product Authentication Service
  • Symantec Private Authorization Service
  • Symantec Product Authorization Service

Answer : Symantec Product Authentication Service

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 2

A job fails with Status Code 96: unable to allocate new media. What causes this error? (Choosetwo.)A. The tape device is down.B. The robot is incorrectly defined.C. The media server is offline.D. The density of available media is invalid.E. The scratch pool is empty. 


Options are :

  • B,C
  • D,E
  • A,B
  • C,D

Answer : D,E

As part of a hot catalog backup, which NetBackup components are backed up? (Choose three.)A. EMM databaseB. Image databaseC. NOM databaseD. configuration filesE. hosts file


Options are :

  • C,D,E
  • B,C,D
  • A,B,C
  • A,B,D

Answer : A,B,D

Which statement is true about the relationship between a master server and an EMM server?   


Options are :

  • None of the Above
  • A master server may use more than one EMM server.
  • A master server may use an EMM server one major version behind.
  • An EMM server supports only one master server
  • An EMM server supports more than one master server.

Answer : An EMM server supports more than one master server.

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Exam Set 11

You have the following configuration:NBU master server: Mas-serverNBU media server: Med-serverMas-server and Med-server are configured to share four tape drives. Mas-server is the robotcontrol host. There is a problem with the tape library and you need to run robtest.On which system would you run robtest?



Options are :

  • Mas-server or Med-server
  • Mas-server only
  • EMM server only
  • Med-server only

Answer : Mas-server only

Which statements are true about upgrading an existing NetBackup installation to NetBackup 6.5?(Choose two.)A. All master and media servers must be on the same revision level.B. All clients must be on the same revision level as their media servers.C. A media server may be one major revision level lower than the master server.D. A client may be one major revision level lower than the master server.E. A master server may be one major revision level lower than a media server.



Options are :

  • C,D
  • A,B
  • A,D
  • B,C

Answer : C,D

Consider the following:A heavily-used file server must be configured as a NetBackup client.The server is in production around-the-clock.Backups must have little effect on client disk I/O and CPU.The client data exists on SAN-attached disks.Which NetBackup method would best fit this scenario?


Options are :

  • Copy on write snapshot
  • Off-host backup
  • Raw partition
  • Mirror snapshot

Answer : Off-host backup

250-371 Administration Symantec NetBackup 7.5 Windows Exam Set 1

You receive Status Code 1: the requested operation was partially successful. How do you analyze this result? 


Options are :

  • Review All Log Entries under Reports on the master server.
  • Review thebpdbm log file on the master server.
  • Review thebpdbjobs log file on the master server
  • Review thebpcd log on the master server.

Answer : Review All Log Entries under Reports on the master server.

You want to keep master server debug logs for five days. Which host properties tab do you use to configure the duration to retain logs? 


Options are :

  • Global Attributes
  • Clean-up
  • Servers
  • Logging

Answer : Clean-up

Which statements are true about legacy logging? (Choose three.)A. Legacy logs should always be enabled.B. Processes or services must be restarted to activate some legacy logging.C. Log folders or directories must be created for each process to be logged.D. Logging levels are set in the host properties.E. Legacy logs are written in the same format as unified logs.




Options are :

  • C,D,E
  • A,B,C
  • B,C,D
  • A,C,D

Answer : B,C,D

ST0-085 Symantec Security Information Manager 4.7 Technical Set 6

Which command can be used to display information about the tape library?   


Options are :

  • scan -tape
  • tpconfig -changer
  • tpconfig -changer
  • scan -changer

Answer : scan -changer

You have recovered all of your NetBackup catalogs using the GUI, which has used the only twocatalog backup tapes. The recovery has been successful. A number of backups have taken placeand a catalog backup is run automatically. The catalog backup fails with an error code 96. Youinvestigate and find that all of the tapes have been allocated.What is the cause of this error?





Options are :

  • The catalog recovery places them into a different volume pool.
  • The catalog recovery suspends the tapes.
  • The catalog recovery freezes the tape
  • The catalog recoveryexpires the tape within Media Manager.

Answer : The catalog recovery freezes the tape

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions