250-265 Data Protection Administration UNIX Practice Exam Set 1

You review your backup reports and find that last night, a large number of backup jobs failed with status code 196. What could cause this status code?


Options are :

  • Heavy network congestion caused timeouts.
  • One or more clients failed to respond.
  • The backup window closed before all backups completed.
  • The supply of available media was exhausted.

Answer : The backup window closed before all backups completed.

ST0-10X Veritas Storage Foundation 5 for Unix Practice Test Set 6

Which statement is true about the relationship between a master server and an EMM server?


Options are :

  • A master server may use an EMM server one major version behind.
  • An EMM server supports more than one master server.
  • An EMM server supports only one master server.
  • A master server may use more than one EMM server

Answer : An EMM server supports more than one master server.

You are performing a disaster recovery of a NetBackup master server to a new system. Another person has configured the system to run the NetBackup database recovery. The recovery is run and you receive the following error message: The following DR media could not be located in NetBackup database. Please insert the following media and run the volume configuration wizard or the vmupdate command to update the NetBackup database. You locate the barcode in NetBackup and find the media ID has been set to P847S1. All media IDs are in a similar format. The library has 200 tapes and you do not know how many DR tapes you need. What can you do to guarantee the tapes will be found?


Options are :

  • Userobtest to mount the media and run the recovery manually.
  • Note the slot number of GBP847S1, delete it and add it back in manually as media ID GBP847, and then run the recovery.
  • Delete all of the tapes and set the Media ID generation rule,reinventory the library, and then run the recovery.
  • Usetpreq to mount the media and run the recovery manually.

Answer : Delete all of the tapes and set the Media ID generation rule,reinventory the library, and then run the recovery.

When installing Net Backup 6.5, which documents should be reviewed before installing the application? (Choose three.)


Options are :

  • Hardware Supported List
  • Operating SystemCompatability Guide
  • Operating System Supported List
  • HardwareCompatability Guide
  • Release Notes

Answer : Operating SystemCompatability Guide HardwareCompatability Guide Release Notes

ST0-135 Symantec Network Access Control 12 Technical Exam Set 6

In the NetBackup Administration console, where do you specify user administration permissions?


Options are :

  • Master Server Properties-->Authentication
  • Master Server Properties-->Authorization
  • Master Server Properties-->Permissions
  • Master Server Properties-->Security

Answer : Master Server Properties-->Authorization

What is the NetBackup client process on a UNIX server?


Options are :

  • bpbkar32
  • bpbkar
  • bprd
  • bpbrm

Answer : bpbkar

Which processes are found on a NetBackup UNIX client? (Choose three.)


Options are :

  • bpcd
  • bpbkar
  • bpbrm
  • bpcompatd
  • tar

Answer : bpcd bpbkar tar

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 7

Which command can be used to display information about the tape library?


Options are :

  • tpconfig -tape
  • tpconfig -changer
  • scan -tape
  • scan -changer

Answer : scan -changer

A recovery of your NetBackup catalogs has failed. Which location contains a log of the recovery?


Options are :

  • /usr/openv/logs (unified logs)
  • /usr/openv/netbackup/logs/bprecover
  • /usr/openv/netbackup/logs/user_ops/root/logs
  • /usr/openv/db/log

Answer : /usr/openv/netbackup/logs/user_ops/root/logs

You have the following configuration: NBU master server: Mas-server NBU media server: Med-server Mas-server and Med-server are configured to share four tape drives. Mas-server is the robot control host. There is a problem with the tape library and you need to run robtest. On which system would you run robtest?


Options are :

  • Mas-server only
  • EMM server only
  • Med-server only
  • Mas-server or Med-server

Answer : Mas-server only

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 6

Which statements are true about legacy logging? (Choose three.)


Options are :

  • Legacy logs are written in the same format as unified logs.
  • Processes or services must be restarted to activate some legacy logging
  • Legacy logs should always be enabled.
  • Logging levels are set in the host properties.
  • Log folders or directories must be created for each process to be logged.

Answer : Processes or services must be restarted to activate some legacy logging Logging levels are set in the host properties. Log folders or directories must be created for each process to be logged.

Which component must be installed before you can complete the Net Backup installation on a master or media server?


Options are :

  • Net Backup Operations Manager (NOM)
  • Authorization (AZ)
  • Private Branch Exchange (PBX)
  • Authentication (AT)

Answer : Private Branch Exchange (PBX)

You receive Status Code 1: the requested operation was partially successful. How do you analyze this result?


Options are :

  • Review thebpdbjobs log file on the master server
  • Review thebpdbm log file on the master server.
  • Review All Log Entries under Reports on the master server.
  • Review thebpcd log on the master server.

Answer : Review All Log Entries under Reports on the master server.

ST0-237 Symantec Loss Prevention Technical Assessment Exam Set 11

Which Symantec shared component is required for the installation of NetBackup Operations Manager?


Options are :

  • Symantec Private Authentication Service
  • Symantec Product Authentication Service
  • Symantec Product Authorization Service
  • Symantec Private Authorization Service

Answer : Symantec Product Authentication Service

You have recovered all of your NetBackup catalogs using the GUI, which has used the only two catalog backup tapes. The recovery has been successful. A number of backups have taken place and a catalog backup is run automatically. The catalog backup fails with an error code 96. You investigate and find that all of the tapes have been allocated. What is the cause of this error?


Options are :

  • The catalog recoveryexpires the tape within Media Manager.
  • The catalog recovery freezes the tapes
  • The catalog recovery places them into a different volume pool.
  • The catalog recovery suspends the tapes.

Answer : The catalog recovery freezes the tapes

What is the name of the Netbackup service running after installation of a Windows client?


Options are :

  • NetBackup Client Service
  • NetBack File System Service
  • NetBackup Remote Service
  • NetBackup Windows Service

Answer : NetBackup Client Service

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 6

Which command is used to verify that NetBackup and Media Manager daemons are running?


Options are :

  • bpps -a
  • bpdbm -a
  • bpbackup -a
  • bpprocess -a

Answer : bpdbm -a

As part of a hot catalog backup, which NetBackup components are backed up? (Choose three.)


Options are :

  • NOM database
  • configuration files
  • hosts file
  • EMM database
  • Image database

Answer : configuration files EMM database Image database

A job fails with Status Code 96: unable to allocate new media. What causes this error? (Choose two.)


Options are :

  • The robot is incorrectly defined.
  • The tape device is down.
  • The media server is offline.
  • The scratch pool is empty.
  • The density of available media is invalid.

Answer : The scratch pool is empty. The density of available media is invalid.

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 9

Which statements are true about installing multiple media servers? (Choose two.)


Options are :

  • All media server installations must be pushed from the master server.
  • All media server installations require a server license key.
  • All media server installations require a tape drive be configured on the system.
  • All media server installations can be pushed from a media server with the same OS.
  • All media server installations should be performed as root/administrator.

Answer : All media server installations require a server license key. All media server installations should be performed as root/administrator.

Which commands can help resolve NetBackup network problems? (Choose three.)


Options are :

  • ping
  • bpverify
  • nbclntcmd
  • bpclntcmd
  • nslookup

Answer : ping bpclntcmd nslookup

What should you do after Net Backup media server is installed?


Options are :

  • Make sure you can communicate with the tape devices.
  • Make sure you have enough disk space for the catalogs.
  • Make sure you have restarted services on the EMM server
  • Make sure you have a server license key.

Answer : Make sure you can communicate with the tape devices.

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 5

What is the default location for unified logs?


Options are :

  • /usr/openv/bin/logs
  • /usr/openv/logs
  • /usr/openv/netbackup/bin/logs
  • /usr/openv/netbackup/logs

Answer : /usr/openv/logs

Attempts to remotely install Net Backup client software on a new UNIX client fail. What are possible solutions for this problem? (Choose two.)


Options are :

  • Enter the master server and root in the .rhosts file in the root directory
  • Update the /etc/inetd file on both machines
  • Turn on universal access in the /etc/services file.
  • Add the user MASTER_SERVER on the client.
  • Type the master server's name and IP address in the client'shosts file.

Answer : Enter the master server and root in the .rhosts file in the root directory Type the master server's name and IP address in the client'shosts file.

Which NetBackup process is responsible for reading data from the client during a backup?


Options are :

  • bpbkar
  • bprd
  • bpcd
  • tar

Answer : bpbkar

ST0-135 Symantec Network Access Control 12 Technical Exam Set 5

Which statements are true about upgrading an existing NetBackup installation to NetBackup 6.5? (Choose two.)


Options are :

  • A master server may be one major revision level lower than a media server.
  • All master and media servers must be on the same revision level.
  • A media server may be one major revision level lower than the master server.
  • All clients must be on the same revision level as their media servers
  • A client may be one major revision level lower than the master server.

Answer : A media server may be one major revision level lower than the master server. A client may be one major revision level lower than the master server.

Consider the following: A heavily-used file server must be configured as a NetBackup client. The server is in production around-the-clock. Backups must have little effect on client disk I/O and CPU. The client data exists on SAN-attached disks. Which NetBackup method would best fit this scenario?


Options are :

  • Mirror snapshot
  • Copy on write snapshot
  • Off-host backup
  • Raw partition

Answer : Off-host backup

After successfully installing three UNIX clients, all backups for those clients fail with Status Code 59: access to the client was not allowed. What should the system administrator do to resolve this problem?


Options are :

  • Edit the .rhosts file on the client and add the master server name.
  • Restart the master server daemons.
  • Reboot the UNIX clients.
  • Verify that the media server is listed in thebp.conf file.

Answer : Verify that the media server is listed in thebp.conf file.

ST0-91W ST0-91W Symantec NetBackup 7.0 for Windows Exam Set 5

Your tape library has just had the robot firmware upgraded and now the robot is reading the bar codes with additional characters. Which rule can be set up to have Net Backup use the same characters as before the firmware upgrade occurred?


Options are :

  • MediaID generation rule
  • MediaID creation rule
  • MediaID barcode rule
  • MediaID setup rule

Answer : MediaID generation rule

You want to keep master server debug logs for five days. Which host properties tab do you use to configure the duration to retain logs?


Options are :

  • Universal Settings
  • Servers
  • Logging
  • Clean-up
  • Global Attributes

Answer : Clean-up

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions