250-252 Administration ofVeritas Storage Foundation 6.0 Test Set 7

A disk group is configured for site awareness for two sites (SiteA and SiteB) and the site consistency flag for the disk group is set to off. Each site has four disks assigned. One disk on SiteB fails. What is the state of the disks assigned to the disk group?


Options are :

  • The failed disk is marked as failed and SiteB remains attached.
  • All disks are marked as failed and SiteB is detached.
  • The failed disk is marked as failed and SiteB is detached.
  • The failed disk is marked as failed and both sites are detached.

Answer : The failed disk is marked as failed and SiteB remains attached.

ST0-91W Symantec NetBackup 7.0 for Windows Practice Exam Set 5

Which two are benefits of using IM security features of Symantec Mail Security 8300? (Select two.)


Options are :

  • archives IM traffic
  • provides support for enterprise IM systems
  • enables disclaimers in IM traffic
  • archives IM traffic
  • allows administrator to restrict/allow IM use by network

Answer : archives IM traffic allows administrator to restrict/allow IM use by network

Hot-relocation is available for which two types of volume layouts? (Select two.)


Options are :

  • striped with hot standby disk
  • striped
  • concatenated with hot standby disk
  • striped with parity
  • striped-mirror

Answer : striped with parity striped-mirror

Which is a predefined pattern available with a Premium Content Control subscription?


Options are :

  • valid social security number
  • social security number
  • US phone number
  • ABA routing numbers

Answer : valid social security number

ST0-247 Symantec Cluster Server 6.1 for UNIX Certifate Exam Set 1

What is a valid deduplication chunk size?


Options are :

  • 2K
  • 256K
  • 1K
  • 32K

Answer : 32K

When performing a dry run for deduplication, fsdedupadm may take a '-o threshold=percentage' argument. This argument will initiate an actual deduplication run when the metric reaches which given value?


Options are :

  • the percentage of file system disk usage
  • the percentage of expected savings
  • the percentage of the dry run completed
  • the percentage of duplicate file names

Answer : the percentage of expected savings

What can be used to specify groups of users for group policies?


Options are :

  • Username, domain names, and IP address
  • Email address, domain names, and IP address
  • Email address, domain names, and LDAP group
  • Domain names, LDAP group, and username

Answer : Email address, domain names, and LDAP group

ST0-237 Symantec Loss Prevention Technical Practice Exam Set 1

What is the major source of IP reputation information for the Symantec Sender Reputation Service?


Options are :

  • The Probe Network
  • customer submissions
  • SMTP traffic shaping results
  • 3rd party real-time blacklist services

Answer : The Probe Network

An administrator needs to provide storage for a critical database application that maximizes both database performance and protection against data loss. Which storage configuration should the administrator select?


Options are :

  • RAID-0+1
  • RAID-0
  • RAID-1
  • RAID-1+0

Answer : RAID-1+0

Which requirement must be met when using the Web Installer to install Veritas Storage Foundation 6.0 for UNIX on multiple systems?


Options are :

  • The installation server and all target systems must be running the same operating system.
  • Only one system can be installed at a time.
  • Only the target systems must be running the same operating system.
  • All systems must be running the same operating system patch level.

Answer : The installation server and all target systems must be running the same operating system.

ST0-237 Symantec Loss Prevention Technical Practice Exam Set 5

Which command is required to make changes in I/O policies for multiple paths persistent?


Options are :

  • vxtune
  • vxdctl
  • vxddladm
  • vxdmpadm

Answer : vxdmpadm

Which scanner log would you consult if you suspect that antispam rules are not being updated?


Options are :

  • Filter hub
  • Transmission
  • Conduit
  • MTA

Answer : Conduit

Which two fields must be configured to identify the LDAP server? (Select two.)


Options are :

  • Name (Bind DN)
  • Username
  • Password
  • Host
  • Port

Answer : Host Port

250-371 Administration Symantec NetBackup 7.5 Windows Exam Set 8

What is the function of the Symantec Mail Security 8300 default Email Virus Policy?


Options are :

  • checks for internal and external mass-mailings and suspicious attachments
  • checks for spyware, adware, and all message attributes
  • checks for viruses, mass-mailing worms, spyware, adware, and suspicious attachments
  • checks for viruses, mass-mailing worms, spam, and suspected spam

Answer : checks for viruses, mass-mailing worms, spyware, adware, and suspicious attachments

During which stage of the installation process is external Internet connectivity mandatory?


Options are :

  • when physically connecting the appliance to the network
  • when racking the appliance
  • during the registration phase of the Site Setup Wizard
  • during the bootstrap phase

Answer : during the registration phase of the Site Setup Wizard

Which two can be managed with group policies? (Select two.)


Options are :

  • File transfers over IM
  • Invalid recipient handling
  • Antispam protection
  • SMTP Traffic Shaping
  • Allowed Sender Lists

Answer : File transfers over IM Antispam protection

250-371 Administration Symantec NetBackup 7.5 Windows Exam Set 9

Which two LDAP directories does Symantec Mail Security 8300 support for LDAP Synchronization? (Select two.)


Options are :

  • Active Directory
  • Lotus Domino
  • Open LDAP
  • Groupwise

Answer : Active Directory Lotus Domino

An administrator sets up site awareness on a host and needs to verify that everything is set up correctly. Which command should the administrator execute to break off one of the sites to verify the configuration?


Options are :

  • vxdg detachsite
  • vxdiskadm
  • vxsite detach
  • vxfiredrill

Answer : vxdg detachsite

What does 'online invalid' indicate for a disk?


Options are :

  • The disk is inaccessible
  • The VTOC is invalid
  • The disk is uninitialized
  • The disk is unlabeled

Answer : The disk is uninitialized

ST0-91W Symantec NetBackup 7.0 for Windows (STS) Test Set 3

Which command is used to change the default thin reclaim schedule?


Options are :

  • vxtune
  • vxdmptune
  • vxdmpadm
  • vxdefault

Answer : vxdefault

Which two types of virtual storage provide data redundancy? (Select two.)


Options are :

  • concatenate
  • stripe
  • RAID-0
  • RAID-5
  • mirror

Answer : RAID-5 mirror

ST0-247 Symantec Cluster Server 6.1 for UNIX Technical Test Set 7

Which two commands can be used to determine the approximate amount of free space in a diskgroup? (Select two.)


Options are :

  • vxdg
  • vxdiskadm
  • vxassist
  • vxdisk
  • vxdefault

Answer : vxdg vxassist

Which virtual storage configuration can be created with Veritas Storage Foundation 6.0 for UNIX?


Options are :

  • RAID
  • LPAR
  • SVM
  • LVM

Answer : RAID

An administrator plans to move disks EMC_11 and EMC_12 from diskgroup appdg to diskgroup webdg. There are several volumes residing on both disks, so the administrator needs a list of volumes that will be affected for planning purposes. Which command should the administrator use to generate the list?


Options are :

  • vxdg listmove appdg webdg EMC_11 EMC_12
  • vxdg list appdg webdg
  • vxdg listclone appdg webdg
  • vxdg listmeta EMC_11 EMC_12

Answer : vxdg listmove appdg webdg EMC_11 EMC_12

ST0-085 Symantec Security Information Manager 4.7 Technical Set 3

A server with one disk group is running Veritas Storage Foundation 6.0 for UNIX and suffers a system board failure. An administrator moves the disks in that disk group to a new server. When the administrator tries to import the disk group, the import fails. Which command should the administrator use to successfully import the disk group?


Options are :

  • vxdg -t import
  • vxdg -n newname import
  • vxdg -C import
  • vxdg -f import

Answer : vxdg -C import

What does the following command do? vxassist -g hrdg mirror payroll hrdg03


Options are :

  • mirrors the hrdg03 volume
  • lists the disk under disk group hrdg
  • mirrors the payroll volume
  • fails to complete

Answer : lists the disk under disk group hrdg

Which command can be run from the command line interface of a Scanner appliance to list, backup or restore the current message audit logging logs?


Options are :

  • malquery
  • mallog
  • nslookup
  • ipconfig

Answer : mallog

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 11

Which two operations can be performed with a Veritas Operations Manager (VOM) Management Server (MS) with all add-ons installed? (Select two.)


Options are :

  • manage user privileges in VEA on the managed host
  • manage Business Entities
  • manage host deployment across the enterprise
  • discover Solaris Zones and Solaris LDOMs running on a managed host
  • discover the secure Oracle databases running on the managed host

Answer : manage Business Entities discover the secure Oracle databases running on the managed host

A Veritas Volume Manager (VxVM) disk named Disk_4 has been removed from the datadg disk group. Which command is used to remove this disk from Veritas Volume Manager (VxVM) control?


Options are :

  • vxdiskunsetup Disk_4
  • vxdisk -g datadg rmdisk Disk_4
  • vxdg -g datadg rmdisk Disk_4
  • vxdisksetup -r Disk_4

Answer : vxdiskunsetup Disk_4

Which command-line option allows you to download the most recent version of the system software?


Options are :

  • swupdate
  • update download
  • swupdate download
  • update install

Answer : update download

ST0-248 Symantec Storage Foundation 6.1 UNIX Technical Exam Set 8

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions