SAP C_TBIT44_71 Development Consultant Net Weaver Exam Set 3

The Advanced Adapter Engine is installed as a component on the central Integration Server.However, it can also be installed de-centrally. Why would you do this? Note: There are 2 correct answers to this question


Options are :

  • De-central adapter installations are more secure than central installations, as they have their own certificate store.
  • The Advanced Adapter Engine provides mapping and routing locally. You can gain a great improvement in performance by using an Integrated Configuration. (Correct)
  • So that the administrator can monitor the adapter environment without having to log on to the Integration Server.
  • Because the transfer of data between an adapter and the underlying EIS may not use a protocol that supports transmission across firewalls, additional adapter engines may need to be installed "close" (in a network sense) to the Business System. (Correct)

Answer : The Advanced Adapter Engine provides mapping and routing locally. You can gain a great improvement in performance by using an Integrated Configuration. Because the transfer of data between an adapter and the underlying EIS may not use a protocol that supports transmission across firewalls, additional adapter engines may need to be installed "close" (in a network sense) to the Business System.

The Partner Connectivity Kit (PCK) is a program which enables smaller companies to exchange data with bigger trading partners using the PI message protocol. What is the platform needed to install and run the PCK?


Options are :

  • An SAP Web Application server with both J2EE and ABAP stack installed.
  • An SAP Web Application Server (J2EE only) running on any system. (Correct)
  • A standalone J2SE engine running on any system.
  • An SAP Web Application Server (ABAP only) running on any system.

Answer : An SAP Web Application Server (J2EE only) running on any system.

SAP C_TSCM52_66 Certified Associate - Procurement Exam Set 4

XML validation allows you to check the structure of a PI message payload.Which of the following steps within PI message processing allow the implementation of XML validation?Note: There are 2 correct answers to this question.


Options are :

  • In the outbound processing, the message is validated in the Integration Engine as a new step in the pipeline. (Correct)
  • In the inbound processing, the message is validated in the Business Process Engine or in the Integration Engine.
  • In the outbound processing, message validation is not possible.
  • In the inbound processing, the message is validated in the Advanced Adapter Engine or in the Integration Engine. (Correct)

Answer : In the outbound processing, the message is validated in the Integration Engine as a new step in the pipeline. In the inbound processing, the message is validated in the Advanced Adapter Engine or in the Integration Engine.

The Services Registry provides visibility in an SOA landscape.Which statements describe the Services Registry?Note: There are 2 correct answers to this question.


Options are :

  • The Services Registry is used by developers to find available Web services they can reuse. (Correct)
  • The Services Registry shows where in the landscape, services are located. (Correct)
  • The Services Registry provides a system landscape description.
  • The Services Registry is used to create Enterprise Services.

Answer : The Services Registry is used by developers to find available Web services they can reuse. The Services Registry shows where in the landscape, services are located.

When messages are processed by the Advanced Adapter Engine, which concepts are correct with regards to monitoring? Note: There are 3 correct answers to this question.


Options are :

  • The detailed status of the messages can be monitored by looking at the audit log via the Runtime Workbench or the NWA. (Correct)
  • The status of the messages in the adapter engine can be monitored by drilling down into the MSGUID from the transaction sxmb_moni.
  • The detailed status of the messages can be monitored by looking at the audit log via the Runtime Workbench or the NWA. (Correct)
  • The RFC adapter and SOAP adapter can be monitored directly in the Advanced Adapter Engine
  • The messages are processed in the adapter engine with the same MSGUID as in the Integration Server. (Correct)

Answer : The detailed status of the messages can be monitored by looking at the audit log via the Runtime Workbench or the NWA. The detailed status of the messages can be monitored by looking at the audit log via the Runtime Workbench or the NWA. The messages are processed in the adapter engine with the same MSGUID as in the Integration Server.

SAP C_TSCM42_66 Certified Associate Production Planning Exam Set 8

A database error caused a system failure on the SAP NetWeaver PI server and stopped the XBQIx queue.Messages for which Quality of Service (QoS) will be affected by that?


Options are :

  • Best Effort (BE)
  • Exactly Once (EO)
  • Exactly Once In Order (EOIO) (Correct)
  • Acknowledgement (ACK)

Answer : Exactly Once In Order (EOIO)

Which of the following standard monitoring types are provided in SAP NetWeaver Process Integration? (Choose two)


Options are :

  • Process monitoring with Process Monitoring Infrastructure (PMI) (Correct)
  • Functional Business Process Monitoring using Enterprise JavaBeans (EJB) modules
  • System monitoring using the Application Interface Framework (AIF)
  • System monitoring using the Computing Center Management System (CCMS) (Correct)

Answer : Process monitoring with Process Monitoring Infrastructure (PMI) System monitoring using the Computing Center Management System (CCMS)

What is a PI Pipeline?


Options are :

  • An integration engine configured as a HUB
  • A proxy object in the Java runtime
  • A configured sequence of pipeline services (Correct)
  • An integration server on an application system

Answer : A configured sequence of pipeline services

SAP C_TSCM42_66 Certified Associate - Production Exam Set 3

Which statements correctly describe asynchronous messages within a PI environment?Note: There are 3 correct answers to this question.


Options are :

  • They are processed with Quality of Service (QoS) Exactly Once (EO) or Exactly Once In Order (EOIO). (Correct)
  • They are not persisted on the Integration Server unless logging is switched on.
  • They are persisted on the Integration Server and can be re-sent from this location in case of problems. (Correct)
  • They are queued for processing by the Integration Engine. (Correct)

Answer : They are processed with Quality of Service (QoS) Exactly Once (EO) or Exactly Once In Order (EOIO). They are persisted on the Integration Server and can be re-sent from this location in case of problems. They are queued for processing by the Integration Engine.

Which of these operations can be performed by a Container Operation step?Note: There are 2 correct answers to this question.


Options are :

  • Removing a message from a multiline container element.
  • Setting the value of an XML element of a message.
  • Incrementing a counter variable. (Correct)
  • Appending a message to a multiline container element (Correct)

Answer : Incrementing a counter variable. Appending a message to a multiline container element

SAP C_TSCM52_66 Certified Associate - Procurement Exam Set 3

You have created a deadline branch. When the deadline has expired, the integration process should be canceled. How can this be achieved?


Options are :

  • As the process can only be stopped by the administrator, a control step that raises an alert to inform the administrator has to be inserted.
  • Insert a switch with an appropriate condition to stop the process.
  • In the deadline branch, insert a control step that cancels the process. (Correct)
  • The process is automatically stopped once the deadline has expired.

Answer : In the deadline branch, insert a control step that cancels the process.

You configure the sender RFC adapter to convert RFC calls from a sender to XML messages.These XML messages are then sent to the Integration Server or to the PCK. What is the purpose of the RFC adapter parameter "Program ID"?


Options are :

  • The Program ID identifies proxy classes for Service Interfaces
  • The Program ID is used in correlation for binding abstract interfaces.
  • The Program ID must uniquely describe the RFC sender communication channel in the configured application server gateway. (Correct)
  • The Program ID is a unique identifier for outbound proxies

Answer : The Program ID must uniquely describe the RFC sender communication channel in the configured application server gateway.

You can influence the transactional behavior during the definition of an integration process in the process editor. This can improve the performance of your integration process. Which step types allow the suppression of the creation of a new transaction? Note: There are 3 correct answers to this question.


Options are :

  • Receive Step
  • Send Step (Correct)
  • Transformation Step (Correct)
  • Receiver Determination Step (Correct)

Answer : Send Step Transformation Step Receiver Determination Step

SAP C_TSCM66_66 Certified Associate Logistics Execution Exam Set 4

For the delivery mode of an integration process, you can choose between inbound processing with or without buffering.Which of these statements correctly describes the Inbound processing mode?Note: There are 3 correct answers to this question.


Options are :

  • If you select inbound processing without buffering, the qRFC entry returns an error when a message is to be delivered to a process instance for which no receive step is active. (Correct)
  • SAP recommends the mode for inbound processing with buffering.
  • If you select inbound processing with buffering and there is no active receive step available to receive an incoming message, the message is buffered in a separate, processinstance-specific queue. (Correct)
  • SAP recommends the mode for inbound processing without buffering. (Correct)

Answer : If you select inbound processing without buffering, the qRFC entry returns an error when a message is to be delivered to a process instance for which no receive step is active. If you select inbound processing with buffering and there is no active receive step available to receive an incoming message, the message is buffered in a separate, processinstance-specific queue. SAP recommends the mode for inbound processing without buffering.

Which of the following is a correct statement about a Software Component?


Options are :

  • A Software Component is an alternate means of organizing content development within the Enterprise Services Directory.
  • A Software Component is the basic building block of an enterprise service.
  • A Software Component is a collection of Products; both the Software Component and the Products have their own versions.
  • A Software Component is a unit of software delivery that has its own versioning and its own support package track. (Correct)

Answer : A Software Component is a unit of software delivery that has its own versioning and its own support package track.

When deciding whether an integration process might be the right solution for your integration scenario, you have to consider some prerequisites.Which of them are relevant for integration processes? Note: There are 3 correct answers to this question.


Options are :

  • The scenario does not require complex user interaction. (Correct)
  • The scenario must require synchronous communication.
  • The process should have a clear end condition. (Correct)
  • The messages to be processed are related to each other in some way. (Correct)

Answer : The scenario does not require complex user interaction. The process should have a clear end condition. The messages to be processed are related to each other in some way.

SAP C_TSCM66_66 Certified Associate Logistics Execution Exam Set 4

Considerable throughput improvements can be expected for BPE processes when using message packaging. What are the advantages of this feature? Note: There are 3 correct answers to this question.


Options are :

  • Improved alert handling
  • Increased message throughput (Correct)
  • Increased BPE performance (Correct)
  • Reduced computer time (Correct)

Answer : Increased message throughput Increased BPE performance Reduced computer time

If a system error occurs in a send step, an alert can be triggered for Alert Management and the integration process should then be terminated.Where do you define the Alert Category for the appropriate Control Step?


Options are :

  • Within the SLD
  • Within the Process Editor
  • Within the Enterprise Services Builder
  • Within the transaction ALRTCATDEF on the Integration Server (Correct)

Answer : Within the transaction ALRTCATDEF on the Integration Server

A special aspect in B2B business processes is that the business partners involved in these processes do not usually provide information about their internal system landscape. Which configuration objects are relevant for B2B configuration?Note: There are 3 correct answers to this question.


Options are :

  • Software Component Version (SWCV)
  • Receiver Determination (Correct)
  • Communication Party (Correct)
  • Communication Channel (Correct)

Answer : Receiver Determination Communication Party Communication Channel

C_TFIN52_05 SAP Financial Accounting Consultant PracticeTest Set 8

You have implemented a scenario where IDocs are posted to an ERP system using the receiver IDoc adapter. Which statements correctly describe the receiver IDoc adapter of SAP NetWeaver PI? Note: There are 3 correct answers to this question.


Options are :

  • A receiver communication channel must be defined in the Integration Builder. (Correct)
  • Specific fields in the IDoc control record can be overwritten using the 'header mapping' functionality in the Receiver Agreement. (Correct)
  • Quality of service EOIO (exactly once in order) is supported, provided that the target system is a SAP Web AS 6.40 or above. (Correct)
  • If the target system is SAP Web AS 6.20 or under, then the quality of service BE (best effort) and EO (exactly once) can be used.
  • IDoc packages are not supported, unless all IDocs are collected by BPM

Answer : A receiver communication channel must be defined in the Integration Builder. Specific fields in the IDoc control record can be overwritten using the 'header mapping' functionality in the Receiver Agreement. Quality of service EOIO (exactly once in order) is supported, provided that the target system is a SAP Web AS 6.40 or above.

Assume that your customer has a scenario in which a database table needs to be queried (i.e. to perform a SELECT statement and obtain the result set). What are the viable options for implementing this with the PI JDBC adapter? Note: There are 2 correct answers to this question.


Options are :

  • Use the sender JDBC adapter to query the database synchronously.
  • Use the receiver JDBC adapter to query the database asynchronously.
  • Use the receiver JDBC adapter to query the database synchronously (Correct)
  • Use the sender JDBC adapter to query the database asynchronously. (Correct)

Answer : Use the receiver JDBC adapter to query the database synchronously Use the sender JDBC adapter to query the database asynchronously.

Which transaction can be used in order to configure the Business Process Engine? Note: There are 2 correct answers to this question.


Options are :

  • SMQ2
  • SWIA
  • SWF_XI_CUSTOMIZING (Correct)
  • SWF_INB_CONF (Correct)

Answer : SWF_XI_CUSTOMIZING SWF_INB_CONF

SAP C_TSCM66_66 Certified Associate Logistics Execution Exam Set 6

To react to situations where it is not possible or not advisable to continue a process in the normal way, you can define exceptions. Which statements correctly describe the triggering of exceptions? Note: There are 3 correct answers to this question.


Options are :

  • A Transformation step can trigger an exception (Correct)
  • A Control step can trigger an exception. (Correct)
  • A synchronous or asynchronous Send step can trigger an exception when a system error occurs. (Correct)
  • Every step type can trigger an exception when a permanent error occurs.

Answer : A Transformation step can trigger an exception A Control step can trigger an exception. A synchronous or asynchronous Send step can trigger an exception when a system error occurs.

The PI Mail adapter is used to send and receive emails. Which protocols are supported? Note: There are 3 correct answers to this question.


Options are :

  • POP3 (Correct)
  • IMAP4 (Correct)
  • SMTP (Correct)
  • HTTP

Answer : POP3 IMAP4 SMTP

The communication between the Integration Server and the backend applications can be achieved without adapters. Which message protocol should you use for this communication type?


Options are :

  • JDBC 2.0
  • RFC-XML
  • PI-SOAP Protocol (Correct)
  • File

Answer : PI-SOAP Protocol

SAP C_TSCM62_65 Certified Associate - Order Fulfilment Exam Set 6

You are implementing an IDoc-based scenario using SAP Netweaver PI and more specifically the sender IDoc adapter. Which of these steps are mandatory for the sender IDoc adapter to function properly? Note: There are 3 correct answers to this question.


Options are :

  • IDoc metadata must be imported into the Enterprise Services Repository (Correct)
  • An RFC destination must be defined on the sender system, pointing to the Integration Server client. (Correct)
  • The Logical System name (ALE name) for the Business System must be defined in the SLD. (Correct)
  • A sender communication channel must be defined in the Integration Builder.

Answer : IDoc metadata must be imported into the Enterprise Services Repository An RFC destination must be defined on the sender system, pointing to the Integration Server client. The Logical System name (ALE name) for the Business System must be defined in the SLD.

You can create multiple configurations for one Integration Process without changing the appropriate process definition.Which of these parameters allows you to achieve this behavior?


Options are :

  • Configurable Parameters in Conditions (Correct)
  • Container Definition
  • Process Signature
  • Correlation

Answer : Configurable Parameters in Conditions

Which Process Integration objects can be used in an integration process?


Options are :

  • All objects displayed in the Process Integration Scenario using this process.
  • Only the objects within the namespace of the integration process.
  • All objects displayed in the navigation area of the Integration Builder.
  • All objects within the software component version of the integration process (Correct)

Answer : All objects within the software component version of the integration process

SAP C_TADM51702 Certified Technology Associate - System Exam Set 1

Which statements are correct when using the Receiver File adapter to process XML messages? Note: There are 2 correct answers to this question.


Options are :

  • The quality of service can be 'best effort' (BE) only.
  • The messages are processed based on a poll cycle.
  • The adapter can convert the XML payload into a flat file. (Correct)
  • The adapter can FTP the file to a remote directory. (Correct)

Answer : The adapter can convert the XML payload into a flat file. The adapter can FTP the file to a remote directory.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions