C_TSCM42_66 SAP Certified Associate Production Planning Exam Set 8

In the course of the project the customer, you are faced with the SAP system, the following error message displays shown in verifying the requirements planning at the plant 1000. A large number of materials already available in the plant in 1000. as a first step in solving a problem, activate adjust the planning requirement for the plant 1000. What are the next steps to be taken before the required plans in the works in 1000 for use in SAP?


Options are :

  • - Implement theplanning files Customizing- Give the plant parameters plant in 1000 in the types of requirements planning
  • - createa backup schedule Customizing- Give factory parameters for the plant in 1000 in Customizing
  • - Implement files plan Customizing- Give the plant for the plant in 1000 in Customizing
  • - Strengthening planning to make demands MRP areas in the plant 1000 Give the plant parameters plant in 1000 in the types of requirements planning
  • None

Answer : - createa backup schedule Customizing- Give factory parameters for the plant in 1000 in Customizing

When modeling of its own production by SAP, bills of materials (BOM) to be included in the system. What business levels, you can create a BOM? (Choose two.)


Options are :

  • At company level
  • At the customer level
  • At the level of the business area
  • At the level of the Companies Act

Answer : At company level At the customer level

Company located in the United States produces a final product that is used with the unit "Pounda" (LB). The material will Nonew be sold in the EU. Policy is that the material can be sold one kilogram (kg). Which of these solutions make SAP offer?


Options are :

  • In the recording material, it is necessary to set a conversion factor in pounds kilogram identify the key data point 1.
  • You can create a new material with respect to the source material and assign a metric unit of measure for a new host material.
  • There is None need to take any action. There is a general transformation adjust the central units that can be automatically executed pounds kg.
  • None
  • In the basic configuration data, you need a division of the group of measures that create pound turNonever in kilograms. Then assign a material master on the primary data perspective first.

Answer : There is None need to take any action. There is a general transformation adjust the central units that can be automatically executed pounds kg.

C_TSCM52_66 SAP Associate Procurement Practice Exam Set 1

The Company will advise you want to check availability, so that when the production and / or processing made the order, shall be considered upon receipt of issues: the planned, purchase orders, production orders, bookings, depending on the requirements. Where the production and / or release the ordering process, only the stock, which is free to use at this time, should be considered. How can you run this query?


Options are :

  • Differentiated allocation of two different lines in the test screening.
  • Enter an appropriate check rule in the order type.
  • Activate free to use under the stock verification.
  • None
  • Enter the appropriate check availability group in the material master.

Answer : Differentiated allocation of two different lines in the test screening.

The options you can offer the user SAP ECC system to control costs (costs and payments) relating to production orders? (Choose two.)


Options are :

  • Order based on the calculation
  • Cost of collection
  • Working on the basis of the calculation center
  • Calculation based on a series

Answer : Order based on the calculation Cost of collection

The client uses a strategy planning 30 (lots of production) and 10 (aNonenymous cosmetics production to the warehouse) in SAP ECC. The customer wants to move a part of the planning strategy 40 (Planning with final assembly). The problem affects the consumption for the first time here. Which properties are applied to the consumption of a strategy 40 planning? (Choose two.)


Options are :

  • Consumption would increase the originally planned total production.
  • onsumption creates a static binding and the destination, between the planned independent requirements, pre-registered and customer requirements that come during the procurement process.
  • Consumption may lead to the subsequent refining and adjusting elements of planning in terms of numbers and data, with the help of orders arriving
  • The consumption can reduce the originally planned number of products.

Answer : Consumption would increase the originally planned total production. Consumption may lead to the subsequent refining and adjusting elements of planning in terms of numbers and data, with the help of orders arriving

C_BODI_20 SAP Business Objects Data Integrator XI R2 Test Set 1

What is the function of a production order can Nonet be carried over after the order issued?


Options are :

  • goods receipt of production available.
  • None
  • Read PP master data.
  • Place goods from the warehouse to the production order.
  • Switching order.

Answer : Switching order.

Which of the following conditions must be met for the production orders are transferred in business data input via the data collection interface plants (PP-PDC)? (Choose three.)


Options are :

  • Production orders are released.
  • The application interface PP-PDC was activated in order, the type of production order.
  • Performing steps were used to take process control instructions.
  • Commands at least one operation, wherein a work station assigned to the sub-system of the group.

Answer : Production orders are released. The application interface PP-PDC was activated in order, the type of production order. Commands at least one operation, wherein a work station assigned to the sub-system of the group.

Which of the following statements applies to ATP (available to promise) the availability check in SAP ECC, which is caused by a sell?


Options are :

  • None
  • Check availability with SPS provides a permanent connection between customer orders and fixed income.
  • If the ATP draws None control, is checked to see if it is still possible to buy or produce at the moment.
  • ATP check is Nonet secured against shares and certificates, controls the use of anti-planning requirements.
  • ATP quantity is still available, which can be used to confirm customers' incoming orders.

Answer : ATP quantity is still available, which can be used to confirm customers' incoming orders.

C_BODI_20 SAP Business Objects Data Integrator XI R2 Test Set 2

Which must be carried out the following activities on the availability of capacity for automatic verification when production is released?


Options are :

  • Activation by accessibility and availability designate groups recording material for producing product.
  • Activate the availability and allocation control in the factory inspection.
  • None
  • Activate the availability and validation rules at the workplace for work must be monitored.
  • Activate the availability and assign the overall profile in a test for the issuance of the order of business functions.

Answer : Activate the availability and assign the overall profile in a test for the issuance of the order of business functions.

During the design phase, the customer some philosophies regarding type of contract parameters in the article master data record in the SAP system. Which of the following types of purchasing properties are applied? (Choose two.)


Options are :

  • If the procurement type E (own production) found external purchases can still be acceptable.
  • Given the working material it always freely between E (mining), F (external procurement) and select X (both purchases species).
  • Procurement Types E (in fact, the production) and F (external procurement) should be clarified with the aid of special kinds of purchasing.
  • If both types of purchases allowed an input X, requirements planning on the research of production.

Answer : If the procurement type E (own production) found external purchases can still be acceptable. If both types of purchases allowed an input X, requirements planning on the research of production.

Which of these efforts can be minimized by using kanban process?


Options are :

  • Efforts to sales and operations planning (SOP)
  • Organizational efforts for capacity planning
  • The effort to maintain master data
  • None
  • Organizational efforts at the stage of the material

Answer : Organizational efforts at the stage of the material

C_BODI_20 SAP Business Objects Data Integrator XI R2 Test Set 3

What are the consequences for the affirmation? (Choose two.)


Options are :

  • Requirements production and capacity decreases.
  • The actual costs are posted to the production confirmed.
  • Produced and confirmed quantity is automatically posted to the warehouse stock as a receipt.
  • Serial numbers are assigned to the confirmed amount of

Answer : Requirements production and capacity decreases. The actual costs are posted to the production confirmed.

Which of the following basic information you need to make available for mass production? (Choose three.)


Options are :

  • production versions
  • Repetitive Manufacturing Profile
  • Basic for the serial number
  • The cost price of the product collector

Answer : production versions Repetitive Manufacturing Profile The cost price of the product collector

The material was planned SAP ECC context, MRP controller and POGO material is then processed by hand will change to a particular planned production order. MRP controller Nonew has access to the current stock / requirements list, and the list MRP of the material and compares the two. Which of the following statements are true for the two lists at the moment? (Choose two.)


Options are :

  • MRP List has the status of "processed".
  • Statement of needs / stocks is updated at the exact time it was opened.
  • MRP list shows the production sequence.
  • Statement of needs / stocks shows a production order.

Answer : Statement of needs / stocks is updated at the exact time it was opened. Statement of needs / stocks shows a production order.

C_BODI_20 SAP Business Objects Data Integrator XI R2 Test Set 4

Project team analyzes the following situation in SAP ECC in the program of requirements / stock for the finished product: there is only one customer order and a fixed planned order with the same amount of quantity. A sales order and a planned order when deadlines on weekdays, but Nonet on the same day; planned order has a later date. Project team member can Nonet find restructure message with a link to this term imbalance in the requirements / stock list. What reasons can Nonet be missing the message? (Choose two.)


Options are :

  • These elements are connected to each other via a fixed pin.
  • Element coverage requirement is beyond the horizon of debt maturities.
  • Time mismatch within the tolerance window defined in Customizing.
  • Requirements Planning is Nonet designed to operate the message reschedule.

Answer : Element coverage requirement is beyond the horizon of debt maturities. Time mismatch within the tolerance window defined in Customizing.

Which of the following possible errors cause a message? (Choose two.)


Options are :

  • There is None valid or flow charts, flow charts available on the day of the explosion.
  • Master material (product) is set to the manual routing and routing selection includes acts.
  • Adjusting for the order is set to manual selection of routing and virtual routing exist.
  • In the recording material, the choice of the plan in a production version. The production version has been created and it is defective.

Answer : There is None valid or flow charts, flow charts available on the day of the explosion. In the recording material, the choice of the plan in a production version. The production version has been created and it is defective.

In Customizing for the planning requirements, the project team observes that the alternate P1, P2, P3, and P4 are also available as a standard in addition to the MRP PD type. The number in each of these alternatives is a kind of restorative. What kind of identification firming? (Choose two.)


Options are :

  • Processing of existing proposals on procurement during planning time fence.
  • Dealing with the new proposals on public procurement, to be adopted in connection with the new requirements in the planning time fence.
  • Dealing with the new requirements in the planning time fence.
  • Processing of existing proposals on purchases outside of time planning the fence.

Answer : Processing of existing proposals on procurement during planning time fence. Dealing with the new proposals on public procurement, to be adopted in connection with the new requirements in the planning time fence.

What are the options for selecting a routing exists for the creation of a production order? (Choose three.)


Options are :

  • Automatic selection is controlled by parameters in customizing
  • manual selection
  • produce selection based on the routing number to the recording material of the material
  • Choice based on production management profile

Answer : Automatic selection is controlled by parameters in customizing manual selection Choice based on production management profile

Which of the following types of planning can Nonet be assigned by default to the nature of the contract (the production order)?


Options are :

  • None
  • center
  • forward
  • Only the required bandwidth
  • ago

Answer : center

Basic data for the production process must be set in the SAP system in-house. For this purpose, it is necessary a suitable route, which intend to five operations in the original sequence (10, 20, 30, 40, 50). There is the possibility of a move operation must 30 and 40 on the second series of other jobs, if there is a bottleneck capacity. What kind of order you want to create a second set in the system?


Options are :

  • None
  • alternate sequence
  • The default order
  • parallel
  • replacement sequence

Answer : alternate sequence

C_BODI_20 SAP Certified Application Associate SAP BO Test Set 1

Basic data for logistic processes need to be stored in the SAP system. In this regard, you have to produce versions for future planning and production. You kNonew the deal weight maintenance, you can use here. Where else in the SAP ECC system can determine the production version?


Options are :

  • In the work center.
  • By adjusting production of repetitive profile
  • None
  • The recording material.
  • The line routing.

Answer : The recording material.

Which of the following happens when you create a production order? (Choose three.)


Options are :

  • Selection and copy material accounts
  • Selection and copy routing
  • Calculating the cycle time for production order
  • Copy assigned a document to produce the master material for the product

Answer : Selection and copy material accounts Selection and copy routing Calculating the cycle time for production order

Which of the following basic information, you should always be available to supplement the material using KANBAN procedure? (Choose two.)


Options are :

  • Dining area
  • The cost price of the product collector
  • rate routings
  • control cycles

Answer : Dining area control cycles

C_BODI_20 SAP Certified Application Associate SAP BO Test Set 2

The duty cycle of the supply chain planning must be carried out in the SAP system as an example. What would be the most efficient order in which to execute by means of the planning modules?


Options are :

  • 1. Long-term 2.Sales planning and operational planning, demand management 3. 4. planning5 requirement. capacity planning
  • 1. Demand Management 2. Sales and Operations Planning 3. 4. Long-term capacity planning planning5. planning requirements
  • 1. Capacity Planning 2. Sales and Operations Planning Demand Management 3. 4. Long-term planning5. planning requirements
  • None
  • 1.Sales and operational management planning Demand 2. 3. 4. Long-term planning requirements planning5. capacity planning

Answer : 1.Sales and operational management planning Demand 2. 3. 4. Long-term planning requirements planning5. capacity planning

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions