C_TBIT44_71 Development Consultant SAP NetWeaver Exam Set 3

What are the characteristics of the integration process? Note: There are two correct answers to this question.


Options are :

  • It is an executable process, between systems.
  • It is not a part-time configuration
  • It is necessary that the configuration scripts to integrate Builder.
  • He is able to receive and collect messages.

Answer : It is an executable process, between systems. He is able to receive and collect messages.

You are working in the system catalog Landscape (SLD), which determines the business system for use in IDoc scenario.Why is the name of the logical system?


Options are :

  • Determine the name of the logical system in the system catalog required distribution landscape model in ALE sending system.
  • If we define the name of the logical system for enterprise systems, directory integration can automatically detect the receiver.
  • IDoc adapter will use this to fix the system name of the company in the name ALE logical system, and vice versa.
  • SOAP-header of the incoming message using the name of the logical system.
  • None

Answer : IDoc adapter will use this to fix the system name of the company in the name ALE logical system, and vice versa.

mapping the message has the concept of "place", which can be used in user-defined functions with the parameter Β «Design TypeA" is set to "All the values ??of the queue '.that statements correctly describe the job queues and contexts in Message Mapping Notes: there are 3 correct answers to this question.


Options are :

  • If no additional items will not be imported to a certain level in the hierarchy, the context of the changes included in the queue.
  • Context includes one or more queues.
  • the node functions are used to manage changes in the communications hierarchy.
  • Mapping message through code runs inside.

Answer : If no additional items will not be imported to a certain level in the hierarchy, the context of the changes included in the queue. the node functions are used to manage changes in the communications hierarchy. Mapping message through code runs inside.

C_TFIN52_05 SAP Financial Accounting Consultant PracticeTest Set 1

It assigns each service interface x-ray interface that describes the type of communication to be performed. Which of these models are supported by SAP NetWeaver PI? Note: There are 3 correct answers to this question.


Options are :

  • synchronous
  • Stateless (XI 3.0-compatible)
  • the confirmation of pre and update / Compensate (TU & C / C)
  • Stateful

Answer : Stateless (XI 3.0-compatible) the confirmation of pre and update / Compensate (TU & C / C) Stateful

? What Lookup features are supported in the graphical tool message display Note: There are two correct answers to this question.


Options are :

  • Java Research Library
  • RFC Searches
  • JDBC Searches
  • ES wildcard Registry

Answer : RFC Searches JDBC Searches

You can use a receiver determination to define one or more receivers for the communication component of the sender, and outbound service interface. You can make a determination of the receiver determines the field value in the payload. What are you doing to adjust the content-based routing?


Options are :

  • None
  • You can only configure the content-based routing using Configuration Assistant.
  • Write a function of the values displayed in the Enterprise Services Repository and import it into the Integration Builder.
  • Specify alternative identifiers in the definition of the party.
  • Use the Editor Conditions to conditions of entry (subject XPATH / Context) for routing.

Answer : Use the Editor Conditions to conditions of entry (subject XPATH / Context) for routing.

C_BODI_20 SAP Business Objects Data Integrator XI R2 Test Set 1

During the creation of a technical system in the system landscape directory to select and add software products that are installed on this operating system. As an option, you can deselect the software components associated with the selected product. Why is this needed?


Options are :

  • The developer using the technical description of the system may not have enough power to work with the software component.
  • A software component is only required for transport.
  • relevant technical system may not include all possible components of the selected product.
  • Some software components may not be part of a particular version of the product.
  • None

Answer : relevant technical system may not include all possible components of the selected product.

Graphics Integration Process mapping tool provides the ability to adjust to display messages. This can be done using the Reload function mapping with the improvements () "Which of these statements describes the purpose of this function. Note:? There are 3 correct answers to this question.


Options are :

  • It refers to changes in the structure to another.
  • Mapping the original node to the new nodes
  • support tool for the display setting after the change of the structure (for example, change the name or namespace root).
  • Overload test messages

Answer : It refers to changes in the structure to another. Mapping the original node to the new nodes support tool for the display setting after the change of the structure (for example, change the name or namespace root).

business systems are systems that operate as a sender or recipient in SAP NetWeaver PI. What determines the kind of business system in the SLD?


Options are :

  • None
  • Type of business system is always sides.
  • type of activity is determined by the system used for the connection mode.
  • type of business system is created when the automatic recording system SLD
  • type of system activity is determined by the type of corresponding technical system.

Answer : type of system activity is determined by the type of corresponding technical system.

C_BODI_20 SAP Business Objects Data Integrator XI R2 Test Set 2

trust interfaces that are created in the application systems to communicate with the integration server. Which of these statements correctly describe the proxy? Note: There are two correct answers to this question.


Options are :

  • service interfaces of confidence generated based repository arranged in Enterprise Services.
  • Service Interface category determines which proxy objects are generated (consumer proxy or ISP proxy).
  • Trusted generated in the Integration Builder.
  • SAP system based on version 4.6 can communicate using IP-SOAP.

Answer : service interfaces of confidence generated based repository arranged in Enterprise Services. Service Interface category determines which proxy objects are generated (consumer proxy or ISP proxy).

Which of these statements correctly describe the connectivity aspects Partner (FCC)? Note: There are two correct answers to this question.


Options are :

  • PCK supports B2B messages.
  • PCK is a joint development of SAP and WebMethods.
  • PCK Architecture Framework based adapter.
  • PCK requires motor adapter or a proxy server to communicate with the native IP.

Answer : PCK supports B2B messages. PCK Architecture Framework based adapter.

C_BODI_20 SAP Business Objects Data Integrator XI R2 Test Set 3

Every time you use a Web services for business-critical applications, it is important that the exchange of messages in a reliable manner.Which statements correctly describe the characteristics of reliable Web Service Messaging Protocol (WS-RM) Note: There are 3 answers correct this question.


Options are :

  • The sequence covers all calls to the logical unit of work (LUW) and assigns them.
  • WS-RM protocol combines one or more messages in sequence.
  • WS-RM is a protocol for synchronous communication.
  • WS-RM must be implemented on the sender side and the receiver.

Answer : The sequence covers all calls to the logical unit of work (LUW) and assigns them. WS-RM protocol combines one or more messages in sequence. WS-RM must be implemented on the sender side and the receiver.

Useful user interface display "Multi-Mapping" In that situation Multi-mapping the most profitable?


Options are :

  • Multi-Mapping is a tool that works in conjunction with mapping models. This new tool provides a consolidated view of all the mapping models use a particular display.
  • Multi-mapping is an improvement of a PI display more stages, in which the target source can be defined to consist of more than one display procedure.
  • None
  • Multi-mapping can be used in ccBPM with abstract interfaces, when there is the need for n: m transformations.
  • Multi-mapping can be used if you want to see the system interface of the sender enterprises in more receiver business systems. These maps can be combined into one card to simplify development and maintenance.

Answer : Multi-mapping can be used in ccBPM with abstract interfaces, when there is the need for n: m transformations.

In order to support the mobility and compatibility of the integration processes, SAP supports and implements large industry set standards.Which these standards supported by SAP NetWeaver Process Integration Notes: There are 3 correct answers to this question.


Options are :

  • UDDIv3
  • WS-BPEL 2.0
  • BPEL4WS1.1
  • XPDL

Answer : UDDIv3 WS-BPEL 2.0 BPEL4WS1.1

C_BODI_20 SAP Business Objects Data Integrator XI R2 Test Set 4

? Mapping Process Integration Message you can configure the library functions for UserDefined functions.When would you Note: There are two correct answers to this question.


Options are :

  • If you want to avoid multiple, user-defined functions for the same purpose.
  • If you want to use user-defined functions.
  • If you want to avoid the use of graphics display functions for complex mapping.
  • If you want to improve the portability of user-defined functions.

Answer : If you want to avoid multiple, user-defined functions for the same purpose. If you want to use user-defined functions.

The customer scenarios, messages are sent to the IP Integration Server for Engine.What Advanced Adapter is a sequence of steps of a typical message flow through the motor adapter?


Options are :

  • Post enters the engine adapter via HTTP, the processor module is called, the message is stored, and the message is delivered to the server system.
  • Message reaches the motor adapter on the RFC protocol, the message is stored, multiple processors are called form and the message is delivered to the server system.
  • None
  • Message from entering the engine via the JMS adapter, the message is stored, multiple processors are called form and the message is delivered to the server system.
  • Post enters the engine adapter via HTTP, the message is stored, the module processors are called, and the message is delivered to the server system.

Answer : Post enters the engine adapter via HTTP, the message is stored, the module processors are called, and the message is delivered to the server system.

When using the mapping of the message during the implementation of the integration process, you can check the value of the item using a Boolean value function.How makes the Boolean function in mapping messages to interpret the test result?


Options are :

  • He only plays is true (case-sensitive) as the true value.
  • He interprets the only true (not case sensitive) as the true value.
  • He plays the one and true (not case sensitive) as the true value.
  • He interprets the only true (case-sensitive) as the true value.
  • None

Answer : He plays the one and true (not case sensitive) as the true value.

JDBC and JMS adapters used to connect to the database and respectively.Which providers transform these further measures required for these adapters to function properly, in addition to the normal configuration?


Options are :

  • Update CPA-cache inside the adapter.
  • None
  • Create a shortcut for the award of a service or a party.
  • Distribution of a particular manufacturer SAP J2EE engine driver.
  • Setting the sender or recipient of integration agreements Configuration Builder.

Answer : Distribution of a particular manufacturer SAP J2EE engine driver.

After creating a business system in the SLD, you can assign the target transport in transport purposes system.What goal?


Options are :

  • With transportation purposes, you can link the names of the relevant business systems in different groups of business systems.
  • Transport aims to describe software dependencies.
  • The transport target is a PI SAP NetWeaver components to support the logistical problems software.
  • None
  • the transportation goals can be imported into Integration Builder.

Answer : With transportation purposes, you can link the names of the relevant business systems in different groups of business systems.

The integration processes are performed using the Business Process engine is runtime.What Business Process Engine?


Options are :

  • None
  • An add-on that is set with transaction SAINT.
  • J2EE component stack on the SAP NetWeaver Application Server.
  • Strengthening SAP Business Workflow Engine.
  • Replacement for SAP Business Workflow Engine.

Answer : Strengthening SAP Business Workflow Engine.

C_BODI_20 SAP Certified Application Associate SAP BO Test Set 1

Techniques of systems application systems, mounted on the system landscape. Which of these statements correctly describe the properties of technical systems? Note: There are 3 correct answers to this question.


Options are :

  • Technicians XPI type of system is the system infrastructure, for example, the transient engines.
  • Technical systems are logical systems that work as senders or recipients as part of SAP NetWeaver PI.
  • ABAP Technical Systems, as a rule, are automatically registered in the SLD server.
  • Technical systems can be attributed to the products.

Answer : Technicians XPI type of system is the system infrastructure, for example, the transient engines. ABAP Technical Systems, as a rule, are automatically registered in the SLD server. Technical systems can be attributed to the products.

SAP NetWeaver Process Integration supports the main key functions within the area of ??β € <β € <area.What integration refers to these jobs Notes: There are 3 correct answers to this question.


Options are :

  • BAM Infrastructure
  • Bus Service
  • warehouse knowledge
  • Enterprise Service Registry and Repository

Answer : BAM Infrastructure Bus Service Enterprise Service Registry and Repository

Which PI component refers to the configuration of the time?


Options are :

  • Enterprise Services Repository
  • Business Process Engine
  • Integration Builder
  • registration services
  • None

Answer : Integration Builder

C_BODI_20 SAP Certified Application Associate SAP BO Test Set 2

Using the search display, conversion program can call functions from other application systems while the display on the integration server program is running. Why you may need Note: There are two correct answers to this question.


Options are :

  • To write data to the database with the display.
  • To enable interaction with the user at runtime.
  • To read from the system data applications in the display program.
  • To call a mapping of existing procedures in the application system.

Answer : To read from the system data applications in the display program. To call a mapping of existing procedures in the application system.

We are considering the use of adapters, the integration process to achieve application integration scenario.Considering font server, any of these questions need to be addressed in the research will be carried out adapter Note: There are two correct answers to this question .


Options are :

  • It makes the back-end connection with the use of industry standards?
  • Is SAP-certified provider of application backend?
  • The backend is based on SAP Web AS 6.20 or higher?
  • Make backend supports JCA (Java Connector Architecture)?

Answer : It makes the back-end connection with the use of industry standards? The backend is based on SAP Web AS 6.20 or higher?

The integration processes are executed in SAP Business Workflow Engine for SAP NetWeaver AS workflow ABAP.When control that was started by the integration process, which of the following may have been valid to perform the process note: There are 3 answers correct this question.


Options are :

  • canceled
  • mistake
  • He started
  • refined

Answer : canceled mistake He started

C_BODI_20 SAP Certified Application Associate SAP BO Test Set 3

As part of your PI implementation project, you should choose the most suitable type of display interface for your conversion needs. Because in most cases, they should be encouraged to graphical display of messages, rather than the XSLT mapping?


Options are :

  • PI does not provide tools for the development of associated messages.
  • Viewing messages is always easier to build XSLT Mapping.
  • None
  • Messages Showing generates Java code that uses the queue. XSLT mapping loads the entire source and the target structure of the memory. Therefore Mapping message is more efficient and can handle deep structured XML documents faster.
  • Messages display a graphical interface; Therefore, it does not require any programming knowledge.

Answer : Messages Showing generates Java code that uses the queue. XSLT mapping loads the entire source and the target structure of the memory. Therefore Mapping message is more efficient and can handle deep structured XML documents faster.

Applied Systems Integration Engine with locals are able to transmit the IP (SOAP with Attachments) protocol with the central Engine.Which integrate these statements correctly describe this type of connection Note: There are two correct answers to this question


Options are :

  • system application to send messages directly to the Advanced Adapter Engine on the IP protocol.
  • Local execution protocol proxy converts between PI and ABAP or Java format.
  • proxy connection does not require adapters.
  • system application to send messages directly to the Advanced Adapter Engine using the SOAP adapter.

Answer : Local execution protocol proxy converts between PI and ABAP or Java format. proxy connection does not require adapters.

Some cards come from SAP, and some come from third parties.Which to have the third-party adapter the following?


Options are :

  • AND OF
  • RFC
  • HTTP
  • None
  • IDOC

Answer : AND OF

C_BODI_20 SAP Certified Application Associate SAP BO Test Set 4

Integration is able to use multiple mappings between interfaces.Which of these statements correctly describes working with multiple display steps?


Options are :

  • All mapping steps configured on the messages on the display board inside the Enterprise Service Repository messages.
  • None
  • Multiple display within the display operation must be registered in the SLD.
  • All mapping steps stated in the interface definition within the Integration Builder, where specified interfaces and display all the programs for each interface.
  • All maps are declared in the operation display in the Enterprise Services Repository. Types of maps and display the program names can be listed there.

Answer : All maps are declared in the operation display in the Enterprise Services Repository. Types of maps and display the program names can be listed there.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions