PEGACLSA_6.2V2 Certified Lead System Architect (CLSA) Exam Set 2

Review the following requirement:As part of a process you would like to display information, such as contact details and organizational affiliation, about the operator that initiated the process. The information is strictly read-only. Given the above requirements which of the following approaches is most appropriate? (Choose One)


Options are :

  • Use the pxCreateOperator linked property
  • Use a declare trigger to copy this information to the work object on each update (Correct)
  • Create a page property with the auto populate option selected for the operator
  • Load the operator as a top-level page in a flow action pre-activity (and remove it later)
  • Use a thread scope declarative page to load the operator

Answer : Use a declare trigger to copy this information to the work object on each update

Review the following requirement:A claims application has as part of its process a step that sends a letter to an individual. After the letter is sent, the claims adjuster cannot do anything to the claim for 28 days. After those 28 days, the next step is for the claims adjuster to review the case details and make a processing decision. During those 28 days, the individual who received the letter may call up the front office and provide new information about the claim at which point the 28-day hold is lifted and the work is routed to the adjuster for the decision. The business says in most cases this call does not occur and the 28 days lapses. Given the information provided, which design is most appropriate? (Choose One)


Options are :

  • After the letter is sent, use a split join to route the work to both the front office and adjuster. Place a 28-day SLA on the front office assignment to resume the flow if the 28 days lapses with no call
  • After the letter is sent, route the work to a "pending" workbasket and place an SLA on it for 28 days. After the 28 days resume/move the flow to the decision step. After processing theupdate resume/move the flow to the decision step. Create a search screen for the front office to find and update work if a call comes in (Correct)
  • After the letter is sent, route the work to a "pending" workbasket and place an SLA on it for 28 days. After the 28 days resume/move the flow to the decision step. At the same time spinoff an assignment to the front office to update work if a call comes in. After processing the update resume/move the flow to the decision step
  • After the letter is sent, route the work to the front office to allow for the updating of the item if and when the call is made. Place a 28-day SLA on the work. If the SLA fires resume/move the flow to the decision step

Answer : After the letter is sent, route the work to a "pending" workbasket and place an SLA on it for 28 days. After the 28 days resume/move the flow to the decision step. After processing theupdate resume/move the flow to the decision step. Create a search screen for the front office to find and update work if a call comes in

PEGACSSA-V6-2 Certified Senior System Architect (CSSA) Exam Set 6

Consider the following requirement:Whether or not an operator is allowed to view accounts in a PRPC-based credit card application depends on the grade of the employee and the credit limit of the account. The grade, which is an attribute in the company's LDAP directory, is a numeric scale ranging from 1-10. The requirement states that employees may open accounts that have a Credit Limit less than (10000 * (10/Grade)). For example, Senior Vice Presidents (Grade = 1) can open accounts with less than a $100,000 limit, and entry-level employees (Grade = 10) can open accounts with less than a $10,000 limit. Which of the following is the best approach to meet this requirement? (Choose One)


Options are :

  • The operators reference an Access Group that references a Role, which is referenced by an Access of Role to Object (ARO) rule. The privilege, CanView, on the ARO references an Access When rule that reads a MaxAmountToOpen property. This property is populated by a Declare Expression that uses the "EmployeeGrade" property, which is populated by an Authentication Activity
  • The operators reference an Access Group that references a Role, which is referenced by an Access of Role to Object (ARO) rule. The "open instances" setting for the ARO references an Access When rule that reads a MaxAmountToOpen property. This property is populated by aDeclare Expression that uses the "EmployeeGrade" property, which is populated by an Authentication Activity (Correct)
  • The operators reference an Access Group that references a Role, which is referenced by an Access of Role to Object (ARO) rule. The "open instances" setting for the ARO references an Access When rule that reads a MaxAmountToOpen property. This property is calculated within the Authentication Activity
  • The operators reference a Work Group that references a Workbasket. The Workbasket eferences a Role, which is referenced by an Access of Role to Object (ARO) rule. The "open instances" setting for the ARO references an Access When rule that reads a MaxAmountToOpen property. This property is populated by a Declare Expression that uses the "EmployeeGrade" property, which is populated by an Authentication Activity

Answer : The operators reference an Access Group that references a Role, which is referenced by an Access of Role to Object (ARO) rule. The "open instances" setting for the ARO references an Access When rule that reads a MaxAmountToOpen property. This property is populated by aDeclare Expression that uses the "EmployeeGrade" property, which is populated by an Authentication Activity

In a Credit card dispute application, PRPC connects to an external service to receive the transactions made by the account holder. When the CSR (Customer Service Representative) is working on the dispute they should see only the last ten transactions made by the account holder. If the transaction that the account holder wants to dispute does not appear in the list then the CSR should perform a search by entering the date of transaction or the transaction amount or the merchant name. The transaction list should display the 10 transactions that satisfies the criteria. In any circumstance the CSR should not see more than 10 transactions in the screen and cannot paginate through results. The external service returns transactions ordered by date of transaction with the recent ones appearing first.Given the above requirements, which of these approaches is most appropriate and would satisfy both these requirements? (Choose One)


Options are :

  • Invoke the activity that makes a connector call to get the list of transactions from an external service before the flow action is rendered. Write a data transform to copy the connector result to a declare page. Create a repeating grid layout using the declare page as its source. Display the first 10 results of the declare page by using the pagination setting First X results
  • Create a thread level declare page which uses an activity as its source. The activity will invoke the connector activity and then copy only the first 10 pages to the declare page. Display the first 10 results of the declare page by using the pagination setting "First X" results
  • Invoke the activity that makes a connector call to get the list of transactions from an external service before the flow action is rendered so that all transactions are available on the clipboard. When a search parameter (transaction date, amount and merchant name) is specified, use a data transform to copy the appropriate subset of the transaction to a new page
  • Create a thread level declare page which uses an activity as its source. This activity will invoke the connector activity and then copy only the first 10 pages to the pagelist property defined in the declare page; this property is used as a source for the repeating grid. A when rule would be used to control when the results are fresh based on the values of the search parameters (transaction date, amount and merchant name) (Correct)

Answer : Create a thread level declare page which uses an activity as its source. This activity will invoke the connector activity and then copy only the first 10 pages to the pagelist property defined in the declare page; this property is used as a source for the repeating grid. A when rule would be used to control when the results are fresh based on the values of the search parameters (transaction date, amount and merchant name)

Review the following requirement:A car loan application has a new requirement to track changes to the following properties duringthe lifecycle of the loan process (which can be many weeks and allows for updates to theseproperties at different points throughout the process).Properties to Track:Loan AmountCar ValueDownpaymentThe new requirement is to track all changes to these properties and send the previous value, current value and operator who made the change to a web service used for fraud detection. A second requirement is to spin-off a loan review process if the loan amount changes by more than 10%. This review process occurs in parallel to the primary process. Given the above requirements which of the following approaches is most appropriate? (Choose One)


Options are :

  • Use the property auditing landing page and its configuration options to track the property changes and call the appropriate web service. Also, create an additional declare on-change rule to check for the 10% change and start the review process
  • Use a declare on-change rule to look for changes in the three properties and then execute the appropriate web service. Use a separate trigger to track the change in loan amount and start the review process flow if the change is more than 10%
  • Use a declare trigger to check for changes to the properties and copy the previous values to three additional properties. In the activity called by the trigger execute the web services and determine, using a when rule, if the 10% change has occured, if so execute the review flow (Correct)
  • Use a declare on-change rule to track all of the properties and execute the web services. Also utilize the process override functionality, in conjunction with a when rule to check for the 10% change, to execute the review process

Answer : Use a declare trigger to check for changes to the properties and copy the previous values to three additional properties. In the activity called by the trigger execute the web services and determine, using a when rule, if the 10% change has occured, if so execute the review flow

PEGACSSA-V6-2 Certified Senior System Architect (CSSA) Exam Set 6

Review the following requirement:A loan application has as part of its process a step that sends a letter to an individual. After the letter is sent, the loan officer cannot do anything to the loan application for 14 days. After those 14 days, the next step is for the loan officer to review the case details and make a processing decision. During those 14 days, the individual who received the letter may call up the front office and provide new information about the application at which point the 14-day hold is lifted and the work is routed to the underwriter for the decision. The business says in most cases this call does not occur and the 14 days lapses. Given the information provided which design is most appropriate? (Choose One)


Options are :

  • After the letter is sent use a split join to route the work to both the front office and loan officer. Place a 14-day SLA on the front office assignment to resume the flow if the 14 days lapses with no call
  • After the letter is sent route the work to a "pending" workbasket and place an SLA on it for 14 days. After the 14 days resume/move the flow to the decision step. After processing the update resume/move the flow to the decision step. Create a search screen for the front office to find and update work if a call comes in (Correct)
  • After the letter is sent route the work to a "pending" workbasket and place an SLA on it for 14 days. After the 14 days resume/move the flow to the decision step. At the same time spinoff an assignment to the front office to update work if a call comes in. After processing the update resume/move the flow to the decision step
  • After the letter is sent route the work to the front office to allow for the updating of the item if and when the call is made. Place a 14-day SLA on the work. If the SLA fires resume/move the flow to the decision step

Answer : After the letter is sent route the work to a "pending" workbasket and place an SLA on it for 14 days. After the 14 days resume/move the flow to the decision step. After processing the update resume/move the flow to the decision step. Create a search screen for the front office to find and update work if a call comes in

You have been asked to build human resources application that facilitates the work required to support new hires. For each new hire, multiple tasks must be done, such as "Enroll in Benefits" and "Acquire Workspace". You are having trouble deciding if each of these tasks should be represented as separate assignments in the same case, or separate subcases. Which of the following requirements will help you decide on the approach? (Choose Two)

A. It must be possible for "Enroll in Benefits" and "Acquire Workspace" to be assigned to different operators at the same time

B. It must be possible for the completion of one task to be independent from the other

C. It must be possible to edit fields for "Enroll in Benefits" and "Acquire Workspace" at the same time

D. It must be possible to configure security differently: those who can open "Enroll in Benefits" must not be able to open "Acquire Workspace"

E. "Enroll in Benefits" and "Acquire Workspace" require the capability to be reopened independently


Options are :

  • A,D
  • B,C
  • A,B
  • C,E (Correct)
  • D,C

Answer : C,E

Review the following requirement:A home loan application has a new requirement to track changes to the following properties during the lifecycle of the loan process (which can be many weeks and allows for updates to theseproperties at different points throughout the process).Properties to Track:Loan AmountHome ValueDownpaymentThe new requirement is to track all changes to these properties and send the previous value,current value and operator who made the change to a web service used for fraud detection. Asecond requirement is to spin-off a loan review process if the loan amount changes by more than20%. This review process occurs in parallel to the primary process.Given the above requirements which of the following approaches is most appropriate? (Choose One)


Options are :

  • Use a declare trigger to check for changes to the properties and copy the previous values to 3 additional properties. In the activity called by the trigger execute the web services and determine, using a when rule, if the 20% change has occurred, if so execute the review flow (Correct)
  • Use the property auditing landing page and its configuration options to track the property changes and call the appropriate web service. Also, create an additional declare on-change rule to check for the 20% change and start the review process
  • Use a declare on-change rule to track all of the properties and execute the web services. Also utilize the process override functionality, in conjunction with a when rule to check for the 20% change, to execute the review process
  • Use a declare on-change rule to look for changes in the 3 properties and then execute the appropriate web service. Use a separate trigger to track the change in loan amount and start the review process flow if the change is more than 20%

Answer : Use a declare trigger to check for changes to the properties and copy the previous values to 3 additional properties. In the activity called by the trigger execute the web services and determine, using a when rule, if the 20% change has occurred, if so execute the review flow

PEGACSSA-v6-2 Certified Senior System Architect (CSSA) Exam Set 6

You have been asked to build a human resources application that facilitates the work required to support new hires. For each new hire, multiple tasks must be done, such as "Acquire Computer" and "Setup Payroll". You are having trouble deciding if each of these tasks should be represented as separate assignments in the same case, or separate sub-cases. Which of the following requirements will help you decide on the approach? (Choose Two)

A. It must be possible for "Acquire Computer" and "Setup Payroll" to be assigned to different operators at the same time

B. It must be possible for the completion of one task to be independent from the other

C. It must be possible to edit fields for "Acquire Computer" and "Setup Payroll" at the same time

D. It must be possible to configure security differently; those who can open "Acquire Computer" must not be able to open "Setup Payroll"

E. "Acquire Computer" and "Setup Payroll" require the capability to be reopened independently


Options are :

  • A,B
  • C,D
  • C,E (Correct)
  • B,C
  • D,E

Answer : C,E

Consider the following situation:A frequently used dynamic select is populated by a SOAP service call. Users have been complaining because the service is slow causing a delay when the list is loaded. The list contains available discount codes and changes at midnight every Sunday. Which of the following approaches is most appropriate to resolve this issue? (Choose One)


Options are :

  • Enable caching on the dynamic select control, this option is currently disabled
  • Trigger the connector with run in parallel selected at the beginning of the flow so that the response is available when it is needed
  • Create an agent that runs at midnight every Sunday and populates a data table, which is used in a report definition to populate the dynamic select (Correct)
  • Create a node scope declarative page with a refresh strategy to refresh every 7 days. Use the declarative page to populate the dynamic select

Answer : Create an agent that runs at midnight every Sunday and populates a data table, which is used in a report definition to populate the dynamic select

Consider the following situation:A PRPC application is running within a 1.2 GB JVM (Java Virtual Machine). There is approximatively 400 MB of free memory and garbage collector reclaims in average 32 MB of memory in the course of an hour. The application is generating approximately 30 database alerts per minute. The database CPU runs at an average of 76% peaking periodically at 97%. The alert log file does not report any byte warning with a 10 MB threshold defined. The Rules Assembly count is 0 when a typical interaction executes in average 74.6 rules. The application CPU peaks periodically at 20% but otherwise runs in average around 12%. Users are complaining about poor performance. Their interactions take in average 4.15 seconds. Which of the following approaches is most appropriate to resolve this issue? (Choose One)


Options are :

  • Reduce the number of loop iterations executing on the large sets of data
  • Reconsider the database table indexes by reviewing query plans (Correct)
  • Avoid retrieving the BLOB column during database interactions
  • Review the application profile log to determine which activities are taking the most time
  • Limit the number of database interactions by storing most data on a series of declare pages

Answer : Reconsider the database table indexes by reviewing query plans

PEGACDA71V1 Certified DCO Architect V7.1 Practice Exam Set 2

Review the following requirement:A PRPC-based stock trading application allows a pool of traders to initiate stocks sale on behalf of customers. However, such an operation should only be allowed during the Stock Market Trading Sessions. The requirement for the application is to detect any operations occurring outside of the Trading Sessions hours, to suspend it and alert a group of auditors to review it and decide whether to allow it to go through during the next session or to simply reject it. Which of the following approaches is the most appropriate for this requirement? (Choose One)


Options are :

  • Build a when rule to identify a trade being initiated outside trading sessions, also build a Declare OnChange rule to track such a trade and suspend it, as well as a flow to review the work item and render a verdict on it (Correct)
  • Build a Case Match rule with condition(s) to identify outside trading sessions trades. In a case match calling activity, loop through the retrieved cases and route them to a "Pending" workbasket. Then call a flow rule with an assignment to an auditor to review the case and make the appropriate decision
  • Tag any trade work item which pyCreateDateTime is not within the session hours and route the work item into the "Pending" workbasket. Send out a RSS feed to the auditors indicating the work item ID so they can create an ad-hoc work on that work item to review it, allow it or reject it
  • Setup the Auditors to be able to subscribe to business events. Configure a business event definition to monitor outside trading sessions trades. And when the event occurs, have the business event defintion notify the subscribers and call a review flow. Have the Auditors subscribe to the event definition

Answer : Build a when rule to identify a trade being initiated outside trading sessions, also build a Declare OnChange rule to track such a trade and suspend it, as well as a flow to review the work item and render a verdict on it

An activity must be executed upon display of a section in a portal. What is the best approach to implement this functionality? (Choose One)


Options are :

  • Create a Custom portal which can invoke an activity and then render the custom HTML rule to display the section
  • Invoke custom on load java script
  • Include the px Local Action section to reference a flow action which can reference an activity (Correct)
  • Customize the open Default or the perform Default standard rules

Answer : Include the px Local Action section to reference a flow action which can reference an activity

PEGACSSA-v6-2 Certified Senior System Architect (CSSA) Exam Set 4

Which of the following statements is most accurate related to delegating rules to business users using the PRPC MyRules functionality? (Choose One)


Options are :

  • The PRPC My Rules feature provides an easily accessible link to a rule but not the security needed to update the rule (Correct)
  • Only decision trees and table can be delegated to a business user using PRPC My Rules functionality
  • The PRPC My Rules feature can only be used to delegate rules in production environments
  • The PRPC My Rules feature is used by business users instead of rule check-in and check-out

Answer : The PRPC My Rules feature provides an easily accessible link to a rule but not the security needed to update the rule

In a PRPC application the View Portfolio Information section has three accordion layouts: Stock Details, Stock graphs and Trade/Payment history. What is the preferred design you will do to make the screen display latest details when they are accessed? (Choose One)


Options are :

  • Write a timer script that periodically does a section refresh
  • Enable the Refresh When active feature on accordion layouts to get the recent transaction (Correct)
  • Add Refresh When condition on each Accordion layouts that refreshes on a When rule which uses a timer to fire the event
  • Defer load on all accordion layouts, selecting them will render data every time

Answer : Enable the Refresh When active feature on accordion layouts to get the recent transaction

Which of the following statements is most accurate when we talk about the localization wizard? (Choose one)


Options are :

  • Localization wizard provide options of whether it creates a separate class or a separate rule set to save the localized rules
  • Localization wizard creates field value rules for all labels in the application
  • Localization wizard cannot be used if we are translating to a language that is not shipped as a language pack by PRPC
  • Localization wizard cannot translate the text in paragraph and correspondence rules (Correct)

Answer : Localization wizard cannot translate the text in paragraph and correspondence rules

PEGACPBA71V1 Certified Pega Business Architect (CPBA) Exam Set 1

It is required that a user must be able to open multiple work items and perform actions simultaneously. What is the most efficient way to implement this? (Choose One)


Options are :

  • Use a Work Area control and enable the tabbed option (Correct)
  • Use a Menu bar control
  • Open work items in modal dialogs
  • Open Work items in multiple popups

Answer : Use a Work Area control and enable the tabbed option

You are asked to implement a work search functionality where the search results must change when the user is typing characters in the search input field. What approach is recommended? (Choose One)


Options are :

  • Include the Find Work (Lucene search) gadget section
  • Use the keyboard event in the px Text Input control (Correct)
  • Create a custom control
  • Add a refresh when condition on the repeat grid containing the search results after adding an ON CHANGE event in the search field

Answer : Use the keyboard event in the px Text Input control

Which of the following statements is most accurate regarding the display of the flow actions at runtime ? (Choose One)


Options are :

  • The display of flow actions are controlled by the harness; we need to reference a different harness if all flow actions must be displayed as links or buttons
  • At run-time the user has the option to switch to a different display from what is defined in design time
  • The perform harness uses a gadget section which accepts menu area, link, button and drop down as parameters which control the display of the flow actions (Correct)
  • The flow action display can be changed by creating custom harness rule instead of using the standard harness

Answer : The perform harness uses a gadget section which accepts menu area, link, button and drop down as parameters which control the display of the flow actions

PEGACSSA-V6-2 Certified Senior System Architect (CSSA) Exam Set 3

In a Purchase Order application, the Review Order Information screen displays the purchase order to the user for them to verify the entries before submitting for processing. In this screen the button label must display Confirm instead of Submit. Which of the following is the best option to handle this requirement? (Choose One)


Options are :

  • Add a pxButton control in the flow action rule
  • Change the label of the button in the flow action rule (Correct)
  • Modify the label of the button in the Action section used in the perform harness
  • Disable the buttons in flow action and add a custom px Button in the section rule

Answer : Change the label of the button in the flow action rule

When is it appropriate to use a spin-off? (Choose One)


Options are :

  • When you wish to start another flow execution while continuing down the current process path (Correct)
  • When you wish to call multiple connector rules concurrently
  • When you wish to make a long-running SOAP service call asynchronously
  • When you wish to run calculations in a separate thread from the current process

Answer : When you wish to start another flow execution while continuing down the current process path

Three (3) flows (Flow-A, Flow-B and Flow-C) are being executed on the same work item. So far, Flow-A has reached its 5th and last assignment, Flow-B has reached its 3rd assignment, and 4th and last assignment of Flow-C has just been created. All assignments are routed to a user's work list. How many records related to this work item would you expect the pc_assign_work list table to hold? (Choose One)


Options are :

  • 11
  • 1
  • 3 (Correct)
  • 12

Answer : 3

PEGACSSA-v6-2 Certified Senior System Architect (CSSA) Exam Set 1

Which of the following requirements best describes a situation where custom rule types should be created? (Choose One)


Options are :

  • An application has a concept of execution strategies, maintained by business executives. An execution strategy defines the run-time sequence and selection of rules and parameters used to execute the strategy (Correct)
  • A group of business users need to maintain business logic that could be represented well in decision trees but the business users find the decision tree form difficult to use
  • A rules engine application has aggressive performance requirements
  • Business users request decision tree like logic with additional customizations such as using more application specific terminology and turning open text boxes into drop downs

Answer : An application has a concept of execution strategies, maintained by business executives. An execution strategy defines the run-time sequence and selection of rules and parameters used to execute the strategy

Which of the following statements most accurately describes dependency management? (Choose One)


Options are :

  • The waiting case can move forward only when all cases it is waiting for are completed
  • In order for 2 cases to depend on each other, they should have a direct parent-child relationship
  • The dependency configuration could be done through the case type rule form of the top-level case
  • A dependency can be configured to instantiate a case when another case has started (Correct)

Answer : A dependency can be configured to instantiate a case when another case has started

You have been asked to design the user interface forms to follow the enterprise branding standard on all user forms generated in PRPC. You have been given the CSS files that can be used as a style guide to format the HTML elements. Which of the following statements is FALSE? (Choose One)


Options are :

  • For all styles that are not available in the branding wizard you need to create a text file rule and reference the text file rule in the harness rule
  • After the skin rule is created using the branding wizard you have to manually reference the skin rule on all end user portals and in developer preferences to see the changes
  • You will import the CSS files in the quick create step of the branding wizard to create all the styles (Correct)
  • Branding wizard creates the skin rule which is nothing but a collection of Text file rules

Answer : You will import the CSS files in the quick create step of the branding wizard to create all the styles

PEGACSSA-V6-2 Certified Senior System Architect (CSSA) Exam Set 4

Which of the following statements is most accurate about the Split-For-Each and Split-Join shapes? (Choose One)


Options are :

  • Split-Join allows you to execute different sub-flows whereas Split-For-Each calls the same process on different pages (Correct)
  • Split-For-Each can only be used when iterating over a list of work objects
  • Split-For-Each allows you to execute different sub-flows whereas Split-Join calls the same process on different pages
  • Both shapes create separate Threads for sub-processes they create

Answer : Split-Join allows you to execute different sub-flows whereas Split-For-Each calls the same process on different pages

If a button is styled in three places - one in the base CSS used in PRPC, one in a custom CSS file that is included in the harness, and one in the Branding wizard, which of the following statements are TRUE? (Choose Two)

A. The buttons use the style defined in the skin on all other harnesses

B. The base CSS takes precedence in all harnessess

C. The button style defined in the custom CSS takes precedence in that harness only

D. The Style defined in the skin rule takes precedence on all harnesses

E. The button style defined in the Skin rule cannot be viewed in designer studio


Options are :

  • C,D
  • A,C (Correct)
  • D,E
  • A,D
  • E,B

Answer : A,C

All user forms in PRPC display a Submit button for submitting the user action. There is a requirement to change the button label to Confirm on all screens instead of Submit, which of the following is the best approach to handle this requirement? (Choose One)


Options are :

  • Modify the label of the button in the Action section used in the perform harness (Correct)
  • Change the label of the button in flow actions
  • Change the label of the button in the button area of the perform harness
  • Add a pxButton control to the flow action rule

Answer : Modify the label of the button in the Action section used in the perform harness

PEGACSA-v6-2 PEGA SYSTEM Certified System Architect CSA Test Set 8

If there is a requirement to embed a 3rd-party API such as jQuery, which approach is recommended? (Choose One)


Options are :

  • IAC is required to integrate with a 3rd-party component
  • Copy the jQuery script into an HTML Fragment
  • Copy the jQuery script into Rule-File-Text instance
  • Define a specialty component which contains the jQuery script (Correct)

Answer : Define a specialty component which contains the jQuery script

Which of the following are the most appropriate situations to use Function Aliases? (Choose Two)

A. To make business rules, such as decision tree and expressions, easier to read and understand for business users

B. To allow the same utility function to be used with different parameter signatures

C. To reduce the risk of rule maintenance errors by limiting the allowed values to be passed to a utility function

D. To allow functions to be executed from activities and flows

E. To allow a single function to have both a technical and non-technical name to be used by both developers and business users


Options are :

  • C,D
  • D,B
  • E,B
  • A,C (Correct)
  • E,A

Answer : A,C

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions