TIBCO Enterprise Message Service Certification Exam Set 4

Which command should be used to modify an existing connection factory

QueueconnectionFactory? 


Options are :

  • addprop factory QueueconnectionFactory (Correct)
  • change factory QueueconnectionFactory
  • modify factory QueueconnectionFactory
  • updateprop factory QueueconnectionFactory

Answer : addprop factory QueueconnectionFactory

Which two parts are optional in JMS Message Structure? (Choose two.) 


Options are :

  • Header
  • Envelope
  • Body
  • A,E (Correct)
  • Properties
  • Footer

Answer : A,E

Which statement is true about acknowledgment modes for non-transacted sessions? 


Options are :

  • The acknowledge mode is set by the administrator of the EMS server.
  • Only EMS extensions of the acknowledge modes can be set by the administrator of the EMS server.
  • The acknowledge mode is set on the message consumer side. (Correct)
  • The acknowledge mode is set on the message producer side.

Answer : The acknowledge mode is set on the message consumer side.

What are two valid ways to create a Connection Factory? (Choose two.) 


Options are :

  • Create factory myFactory queue url=tcp://server:7777,tcp://server1:8888
  • Create factory myFactory queue url=tibjmsnaming://server:7777
  • Create factory myFactory queue url=ssl://server:7777
  • A,C (Correct)
  • Create factory myFactory queue url=ems://server:7777
  • Create factory myFactory queue url=tibjmsnaming://server:7777,tibjmsnaming://server:8888

Answer : A,C

Within TIBCO Activematrix Administrator, which three can have logging enabled? (Choose three.)


Options are :

  • A,C,D (Correct)
  • ActiveMatrix node
  • ActiveMatrix enterprise
  • ActiveMatrix host
  • ActiveMatrix environment
  • ActiveMatrix composite application

Answer : A,C,D

Which character is valid separator in the URL for a client to connect to a fault-tolerant EMS

server pair? 


Options are :

  • . (Correct)
  • &
  • ;
  • |

Answer : .

Which character is valid separator in the URL for a client to connect to a load-balanced
EMS server pair?



Options are :

  • &
  • .
  • | (Correct)
  • ;

Answer : |

Which two parameters apply to mstore only? (Choose two.) 


Options are :

  • mstore_file
  • A,B (Correct)
  • file truncate
  • scan_target_interval
  • scan_iter_interval

Answer : A,B

Which two statements are true about server parameters used to configure statistics?

(Choose two.) 


Options are :

  • server_rate_interval parameter can be set to zero to disable average calculation of server statistics.
  • rate_interval parameter can be set to zero to disable average calculation of producer's statistics.
  • Server statistics can be disabled using the statistics parameter.
  • A,D (Correct)
  • Producers statistics can be disabled using the statistics parameter.

Answer : A,D

Which two statements are true about SSL support in EMS? (Choose two.) 


Options are :

  • B,D (Correct)
  • Secure communications will occur between an EMS client and EMS server.
  • When authorization is enabled, username and passwords are not checked on SSL connections.
  • If the producer uses SSL to connect to the EMS server, the consumer must also use SSL.
  • Secure communications will occur between the Administration Tool and EMS server.

Answer : B,D

Which three TIBCO Business Events objects can be stored in cache servers? (Choose three.)


Options are :

  • A,D,E (Correct)
  • Concepts
  • Scorecards
  • Rule Functions
  • Global Variables
  • Rules
  • Events

Answer : A,D,E

Which statement best characterizes the IT architecture for a solution?


Options are :

  • It defines the structure of a solution ( communication mechanisms, components) suitable for the present purpose.
  • It provides a generic framework, such as an application server, that is suitable for solving any common business problem.
  • It is a compilation of user features required for the solution. (Correct)
  • It defines the set of products, technologies, programming tools, and coding standards to be used to implement a solution.

Answer : It is a compilation of user features required for the solution.

Which type of wiring can be done at deployment time?


Options are :

  • from a service in one SCA composite to a reference of another SCA composite
  • from a reference in one SCA comopsite to a service of another SCA composite (Correct)
  • from a component reference to a component service in the same SCA composite
  • from a component service to a component reference in the same SCA composite

Answer : from a reference in one SCA comopsite to a service of another SCA composite

Concept a contains Concept B. Concept A is using Cache Only mode of object management mode is recommended for Concept B to use?


Options are :

  • Memory Only
  • Memory Only or Cache Only
  • Memory Only or Cache + Memory or Cache Only
  • Cache + Memory or Cache Only (Correct)

Answer : Cache + Memory or Cache Only

Which statement is true about rules?


Options are :

  • To assert a new set of concept instances it must be returned as arrays of objects from a rule
  • Returning an event instance from a rule sends the events to its default destination.
  • Executing a rule action may prevent the execution of other rules matching the criteria. (Correct)
  • AI rules matching the conditions at given time will be triggered in parallel.

Answer : Executing a rule action may prevent the execution of other rules matching the criteria.

Which two statements reflect the realities about using common data models? (Choose two.)


Options are :

  • The use of comprehensive data structures that combine many concepts simplifies interface design.
  • The goal of common data models is to minimize the number of representation of each concept.
  • B,D (Correct)
  • Enterprises typically require more than one representation for each concept.
  • A common data model provides a single representation of each concept that is used every where.

Answer : B,D

What are three key configuration elements that must be used to run the debugger? (Choose three.)


Options are :

  • A,B,E (Correct)
  • Processing Unit name
  • EAR file location
  • Destination collection
  • CDD file location
  • Rule collection

Answer : A,B,E

Which two JMS message types are supported by Text Message Serializer? (Choose two.)


Options are :

  • Text Message
  • Stream Message
  • A,D (Correct)
  • Mao Message
  • Bytes Message

Answer : A,D

What are three concept attributes? (Choose Three.)


Options are :

  • @id
  • @extld
  • @payload
  • A,C,E (Correct)
  • @ttl
  • ?parent

Answer : A,C,E

Which two statements are true about the Delegation pattern? (Choose two.)


Options are :

  • The service consumer does not receive the work result.
  • The service consumer receives confirmation that the work was completed successfully.
  • B,D (Correct)
  • The service consumer receives confirmation that the request was accepted.
  • The service provider sends the work result to the service consumer.

Answer : B,D

Consider the following design of a Balance Manager service and its corresponding implementation in the Account Balance Manager: Which statement is true about the deployment of the Account Balance Manager Component? 


Options are :

  • If two instance of the Account Balance Manager are deployed on different nodes than the Balance Manger Service, each service request will be handled by one of the instances. (Correct)
  • It is illegal to deploy more than one instance of the Account Balance Manager.
  • If one instance of the Account Balance Manger is deployed on the same node as the Balance Manger Service and another Account Balance Manager is deployed on a different node, the instance on the different node can never receive the requests.
  • If two instance of the Account Balance Manger are deployed on different nodes than the Balance Manger Service, each service request will be handled by both of the instances.

Answer : If two instance of the Account Balance Manager are deployed on different nodes than the Balance Manger Service, each service request will be handled by one of the instances.

What is used to deliver status notification from the TIBCO Active Matrix node to the Active Matrix Administrator?


Options are :

  • TIBCO Enterprise Message Service (Correct)
  • RMI
  • TIBCO Rendezvous
  • HTTPS

Answer : TIBCO Enterprise Message Service

Which two statements are true about a decision table? (Choose two.)


Options are :

  • The entire table represents a rule.
  • A rule function's arguments represent columns of a table.
  • Each row in the table represents a rule.
  • A,C (Correct)
  • Each table can have one exception table.

Answer : A,C

How do you achieve high availability for a TIBCO Active matrix Java component providing a service with a SOAP/HTTP binding type?


Options are :

  • deploy the service in the system node so the Active matrix infrastructure can manage availability
  • deploy the service across multiple nodes and place a load balancer in front of the service availability (Correct)
  • specify virtualization upon service deployment allowing Active matrix to transparently route requests
  • create a single node that spans multiple hosts to provide resiliency in the event of host failure

Answer : deploy the service across multiple nodes and place a load balancer in front of the service availability

When does an RTC cycle end?


Options are :

  • When an external action causes changes to the RETE network
  • When TIBCO Business Events builds (or refreshes) a rule action agenda
  • When a rule action is executed
  • When the rule action agemda is empty (Correct)

Answer : When the rule action agemda is empty

Which two interaction patterns are supported in TIBCO Active matrix Service Bus? (Choose two.)


Options are :

  • Synchronous In-Out with SOAP/JMS
  • Synchronous Out-In with XML over JMS
  • Asynchronous In-Out with Soap/HTTP
  • Asynchronous Out-Only with XML over JMS
  • A,D (Correct)

Answer : A,D

Where are system-level settings configured before the TIBCO Business Events engine can be started?


Options are :

  • CDD
  • EAR
  • XML
  • TRA (Correct)

Answer : TRA

Which three types of channels are supported in TIBCO Business Events 5? (Choose three.)


Options are :

  • HTTP
  • TIBCO TRA
  • FTP
  • JDBC
  • JMS
  • B,C,D (Correct)
  • TIBCO Rendezvous

Answer : B,C,D

In Cache Object Management settings, what does the property cache Agent Quo rum specify?


Options are :

  • The size of the limited cache
  • The maximum size of the object table cache
  • The minimum number of storage-enabled nodes that must be active in the cluster at startup (Correct)
  • The number of members in the cluster that hold the backup data

Answer : The minimum number of storage-enabled nodes that must be active in the cluster at startup

Which abject management type should be used when cache Load concept by Id  () has been defined explicitly to load objects?


Options are :

  • Cache + Memory
  • Berkeley DB
  • In-memory
  • Cache only (Correct)

Answer : Cache only

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions