Microsoft Windows Server 2016 Certification: Exam 70-741 Set 5

You are the administrator for your company network. You have a Windows Server 2016 DHCP server named Server1 that has the following scopes configured: Scope Name             Address Pool               Default Gateway              DNS Server Desktops                   192.168.0.0/24               192.168.0.1                         192.168.0.140 Visitors                      192.168.0.1/24               192.168.1.1                         192.168.0.140 All other scope settings are set to the default values. There are no available address spaces for another scope to be created. Your network has 150 desktop computers that have access to the corporate network. Your company also provides visitors with Wi-Fi access to the network. There can be up to 200 visitors each day. What should you do to ensure that you have enough address spaces for Visitors?


Options are :

  • Configure a superscope that contains the Visitors scope.
  • For the Visitors scope, run the DHCP Split Scope Configuration Wizard.
  • Run Set-DhcpServer4Scope –Name Mobile –LeaseDuration 0.02:00:00.
  • Run Set-DhcpServer4Scope –ActivatePolicies $True –Name Mobile–MaxBootPClients 200.

Answer : Configure a superscope that contains the Visitors scope.

Microsoft Windows Server 2016 Certification: Exam 70-741 Set 6

You are the administrator for your company network. You have a DHCP server named Server1. Server1 has an IPv4 scope that serves 75 client computers that run Windows 10. When you review the address leases in the DHCP console, you discover that there are several leases for devices that you do not recognize. What should you do if you need to ensure that only the 75 Windows 10 computers can obtain a lease from the scope?


Options are :

  • Run the Add-DhcpServerv4ExclusionRange cmdlet.
  • Create a DHCP policy for the scope.
  • Create and enable a DHCP filter.
  • Run the Add-DhcpServerv4OptionDefinition cmdlet.

Answer : Create a DHCP policy for the scope.

You are the administrator for your company network. You have Windows Server 2016 servers named Server1 and DHCP1. DHCP1 contains an IPv4 scope named Scope1. You have 1,000 client computers. You need to configure Server1 to lease IP addresses for Scope1. The solution must ensure that Server1 is used to respond to up to 30 percent of the DHCP client requests only. On Server1, you install the DHCP Server role. What should you do next?


Options are :

  • Run the Configure Failover Wizard from the DHCP console.
  • Create a superscope from the DHCP console.
  • Install the Network Load Balancing (NLB) feature from Server Manager.
  • Install the Failover Clustering feature from Server Manager.

Answer : Run the Configure Failover Wizard from the DHCP console.

You are the administrator for your company network. You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static IP address. Each network card connects to a different network segment. Server1 has an IPv4 scope named Scope1. What should you do if you need to ensure that Server1 only uses one network card when leasing IP addresses in Scope1?


Options are :

  • Create a reservation.
  • Modify the Conflict Detection Attempts setting from the properties of Scope1.
  • Create a new filter from IPv4.
  • Configure Name Protection from the properties of Scope1.
  • Create an exclusion range from the properties of Scope1.
  • Run the DHCP Policy Configuration Wizard from IPv4.
  • Configure the bindings from the properties of IPv4.

Answer : Configure the bindings from the properties of IPv4.

Microsoft 70-647 Windows Enterprise Administrator Exam Set 7

You are the administrator for your company network. You have a DHCP server named Server1 that has an IPv4 scope named Scope1. Users report that when they turn on their computers it takes a long time to access the network. You validate that it takes a long time for the computers to receive an IP address from Server1. You monitor the network traffic and discover that Server1 issues five ping commands on the network before leasing an IP address. What should you do if you need to reduce the amount of time it takes for the computers to receive an IP address?


Options are :

  • Create a reservation.
  • Modify the Conflict Detection Attempts setting from the properties of Scope1.
  • Create a new filter from IPv4.
  • Configure Name Protection from the properties of Scope1.
  • Create an exclusion range from the properties of Scope1.
  • Run the DHCP Policy Configuration Wizard from IPv4.
  • Configure the bindings from the properties of IPv4.

Answer : Modify the Conflict Detection Attempts setting from the properties of Scope1.

You are the administrator for your company network. Your network contains Windows and non-Windows devices. You have a DHCP server named Server1 that has an IPv4 scope named Scope1. What should you do if you need to prevent a client computer that uses the same name as an existing registration from updating the registration?


Options are :

  • Create a reservation.
  • Modify the Conflict Detection Attempts setting from the properties of Scope1.
  • Create a new filter from IPv4.
  • Configure Name Protection from the properties of Scope1.
  • Create an exclusion range from the properties of Scope1.
  • Run the DHCP Policy Configuration Wizard from IPv4.
  • Configure the bindings from the properties of IPv4.

Answer : Configure Name Protection from the properties of Scope1.

You are the administrator for your company network. You have an Active Directory forest that contains 30 servers and 6,000 client computers. You deploy a new DHCP server that runs Windows Server 2016. What command should you run if you need to retrieve the list of the authorized DHCP servers?


Options are :

  • Get-DhcpServerDatabase
  • Netstat -p IP -s -a
  • Get-DhcpServerInDC
  • Show-ADAuthenticationPolicyExpression-AllowedToAuthenticateTo

Answer : Get-DhcpServerInDC

Microsoft 70-642 Windows Server Network Infrastructure Exam Set 2

You are the administrator for your company network. You have a DHCP server named Server1. Server1 has an IPv4 scope that contains 100 addresses for a subnet named Subnet1. Subnet1 provides guest access to the Internet. There are never more than 20 client computers on Subnet1 simultaneously; however, the computers that connect to Subnet1 are rarely the same computers. You discover that some client computers are unable to access the network. The computers that are having connection issues have IP addresses in the range of 169.254.0.0/16. What should you do if you need to ensure that all of the computers can connect successfully to the network and access the Internet?


Options are :

  • Modify the lease duration.
  • Configure Network Access Protection (NAP) integration on the existing scope.
  • Create a new scope that uses IP addresses in the range of 169.254.0.0/16.
  • Modify the scope options.

Answer : Modify the lease duration.

You are the administrator for your company network. Your network contains an Active Directory domain. The domain contains a Windows Server 2016 server named Server1 that has IPAM installed. IPAM is configured to use the Group Policy–based provisioning method. The prefix for the IPAM Group Policy Objects (GPOs) is IP. From Group Policy Management, you manually rename the IPAM GPOs to have a prefix of IPAM. What should you do if you need to modify the GPO prefix used by IPAM?


Options are :

  • Run the Invoke-IpamGpoProvisioning cmdlet.
  • Click Configure Server Discovery in Server Manager.
  • Click Provision the IPAM Server in Server Manager.
  • Run the Set-IpamConfiguration cmdlet.

Answer : Run the Set-IpamConfiguration cmdlet.

You are the administrator for your company network. Your network contains one Active Directory domain named abc.com that contains an IPAM server named Server1. Server1 manages several DHCP and DNS servers. From Server Manager on Server1, you create a custom role for IPAM. What should you do if you need to assign the role to a group named IP_Admins?


Options are :

  • Run the Add-Member cmdlet using PowerShell.
  • Run the Set-IpamConfiguration cmdlet using PowerShell.
  • Create an access policy using Server Manager.
  • Create an access scope using Server Manager.

Answer : Create an access policy using Server Manager.

70-646 Pro Windows Server 2008 - Server Administrator Exam Set 6

You are the administrator for your company network. Your network contains an Active Directory domain that contains a Windows Server 2016 DNS server named Server1. All domain computers use Server1 for DNS. You sign the domain by using DNSSEC. What should you configure in Group Policy if you need to configure the domain computers to validate DNS responses for records?


Options are :

  • Name Resolution Policy Table (NRPT)
  • Network List Manager Policies
  • Network Access Protection (NAP)
  • Public Key Policy

Answer : Name Resolution Policy Table (NRPT)

You are the administrator for your company network. Your network contains an Active Directory forest. Users frequently access the website of an external partner company. The URL of the website is http://partners.abc.com. The partner company informs you that it will perform maintenance on its web server and that the IP address of the web server will change. After the change is complete, the users on your internal network report that they fail to access the website. However, some users who work from home report that they are able to access the website. You need to ensure that your DNS servers can resolve partners.abc.com to the correct IP address immediately. What should you do?


Options are :

  • Run dnscmd and specify the CacheLockingPercent parameter.
  • Run Set-DnsServerGlobalQueryLockList.
  • Run ipconfig and specify the Renew parameter.
  • Run Set-DnsServerCache.

Answer : Run Set-DnsServerCache.

You are the administrator for your company network. What should you run if you need to verify whether a DNS response from a DNS server is signed by DNSSEC?


Options are :

  • dnscmd.exe
  • nslookup.exe
  • Get-NetIPAddress
  • Resolve-DnsName

Answer : Resolve-DnsName

70-647 Pro Windows Server 2008 Enterprise Administrator Exam Set 3

You are the administrator for your company network. You have a Windows Server 2016 DNS server named Server1. You need to disable recursion on Server1. What are three possible ways to achieve this goal? (Choose three.)


Options are :

  • Create a reverse lookup zone named 0.in-addr.arpa.
  • Create a forward lookup zone named GlobalNames.
  • From DNS Manager, modify the advanced properties of Server1.
  • From DNS Manager, modify the forwarders properties of Server1.
  • Create a forward lookup zone named "".
  • Run dnscmd.exe and specify the /config parameter.

Answer : From DNS Manager, modify the advanced properties of Server1. Create a forward lookup zone named "". Run dnscmd.exe and specify the /config parameter.

You are the administrator for your company network. You have a Windows Server 2016 DHCP server named Server1. You have a single IP subnet. Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a length of 24 bits. What should you do if you need to create a second logical IP network on the subnet? The subnet will use an IP address range of 10.0.2.10 to 10.0.2.200 and a length of 24 bits.


Options are :

  • Create a second scope and then run the DHCP Split-Scope Configuration Wizard.
  • Create a superscope and then configure an exclusion range in Scope1.
  • Create a new scope and then modify the IPv4 bindings.
  • Create a second scope and then create a superscope.

Answer : Create a second scope and then create a superscope.

You are the administrator for your company network. You are implementing a new network. The network contains a Windows Server 2016 DHCP server named DHCP1 that contains a scope named Scope1 for the 192.168.0/24 subnet. Your company has the following policies: ? All server addresses must be excluded from DHCP scopes. ? All client computers must receive IP addresses from Scope1. ? All Windows servers must have IP addresses in the range of 192.168.0.200 to 192.168.0.240. ? All other network devices must have IP addresses in the range of 192.168.0.180 to 192.168.0.199. You deploy a print device named Print1. What command should you run if you need to ensure that Print1 adheres to the policies for allocating IP addresses?


Options are :

  • Add-DhcpServerv4Reservation
  • Add-DhcpServerv4Lease
  • Add-DhcpServerv4ExclusionRange
  • Add-DhcpServerv4Filter

Answer : Add-DhcpServerv4ExclusionRange

70-513 WCF Development with Microsoft .NET Framework 4 Exam Set 5

You are the administrator for your company network. Your network contains an Active Directory domain named abc.com. The domain contains two Windows Server 2016 servers named Server1 and Server2. Server1 has IPAM installed. Server2 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed. You need to integrate IPAM and VMM. What type of object should you create on Server1?


Options are :

  • Access Policy
  • Network Service
  • User Role
  • Service Template

Answer : Access Policy

You are the administrator for your company network. You and a colleague are discussing the use of network IDs. Because the network ID bits must always be chosen in a contiguous fashion from the high-order bits, a shorthand way of expressing a subnet mask is to denote the number of bits that define the network ID as a network prefix using the network prefix notation: /<# of bits>. What is the network prefix for Class B?


Options are :

  • /8
  • /16
  • /24
  • /64

Answer : /16

You are the administrator for your company network. You and a colleague are discussing private IP address ranges as specified by the Internet Request for Comments (RFC) 1918. Which of the following is not a recognized private IP address range as specified by RFC 1918?


Options are :

  • 10.0.0.0–10.255.255.255
  • 128.24.0.0–128.24.255.255
  • 172.16.0.0–172.31.255.255
  • 192.168.0.0–192.168.255.255

Answer : 128.24.0.0–128.24.255.255

70-647 Pro Windows Server 2008 Enterprise Administrator Exam Set 2

You are the administrator for your company network. You and a colleague are discussing network IDs. What is the network ID of the IP node 129.56.189.41 with a subnet mask of 255.255.240.0?


Options are :

  • 129.56.176.0
  • 129.56.176.1
  • 129.56.189.0
  • 129.56.189.1

Answer : 129.56.176.0

You are the administrator for your company network. You are deploying a network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All of the computers obtain their IP configurations from a DHCP server named Server1. You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named Internal and Internet. Internet connects to an Internet Service Provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address. What should you do if you need to provide Internet connectivity for the client computers?


Options are :

  • Select the Internet and Internal network adapters and bridge the connections on Server2. On Server1, using the DHCP console, authorize Server2.
  • Stop the DHCP server on Server1. On Server2, on the Internal network adapter, enable Internet Connection Sharing (ICS).
  • Run the New-NetNat Name NAT1 -InternalIPInterfaceAddressPrefix 192.168.1.0/24 cmdlet on Server2. Configure Server1 to provide the 003 Router option of 131.107.0.10.
  • Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 192.168.1.250.

Answer : Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 192.168.1.250.

You are the administrator for your company network. You have a Windows Server 2016 server named Server1 that has two network cards. One network card connects to your internal network and the other network card connects to the Internet. You plan to use Server1 to provide Internet connectivity for client computers on the internal network. What server role or role service should you install on Server1 first if you need to configure Server1 as a network address translation (NAT) server?


Options are :

  • DirectAccess and VPN
  • Network Controller
  • Routing and Remote Access
  • Web Application Proxy

Answer : Routing and Remote Access

70-513 WCF Development with Microsoft .NET Framework 4 Exam Set 2

You are the administrator for your company network. Your network contains three subnets: ? Production Servers: A production network ? Development Servers: A development network ? Client Computers: A client network The development network is used to test applications and reproduces servers that are located on the production network. The development network and the production network use the same IP address range. A user, User1, has a client computer on the client network. User1 reports that when he attempts to connect to the IP address 10.10.1.6 from his computer, he connects to a server on the production network. What should you run if you need to ensure that when User1 connects to 10.10.1.6, he connects to a server on the development network?


Options are :

  • New-NetNeighbor
  • New-NetRoute
  • Set-NetNeighbor
  • Set-NetTcpSetting

Answer : New-NetRoute

You are the administrator for your company network. You have a Windows Server 2016 server named Server1 that has a Server Core installation. Server1 is configured to obtain an IP address automatically. What should you run if you need to configure the IPv4 address, subnet mask, and default gateway manually for a network interface named Ethernet on Server1?


Options are :

  • Set-NetIPv4Protocol
  • New-NetIPAddress
  • Set-NetAdapter
  • Set-NetNat

Answer : New-NetIPAddress

You are the administrator for your company network. Your network contains an Active Directory domain. The domain contains a Windows Server 2016 DNS server named Server1 that you want to have Response Rate Limiting (RRL). What cmdlet should you run to enable RRL?


Options are :

  • Add-DnsServerClientSubnet
  • Enable-DnsServerPolicy
  • Set-DnsServerResponseRateLimiting
  • Set-DnsServerResponeRateLimitingExceptionlist

Answer : Set-DnsServerResponseRateLimiting

70-642 Windows Server 2008 Network Infrastructure Exam Set 3

You are the administrator for your company network. You have a Windows Server 2016 server named Server1. You promote Server1 to a domain controller. What should you do on Server1 if you need to view the service location (SRV) records that Server1 registers in DNS?


Options are :

  • Open the netlogon.dns file.
  • Open the srv.sys file.
  • Run Get-DnsServerDiagnostics.
  • Run ipconfig /displaydns.

Answer : Open the netlogon.dns file.

You are the administrator for your company network. Your network contains a Windows Server 2016 DNS server named Server1. The network also contains a Windows Server 2012 R2 server named Server2. You change the IP address of Server2. A few hours later several users report that they cannot connect to Server2. On the users’ client computers, you flush the DNS client resolver cache and the users can successfully connect to Server2. What value should you modify in the Start of Authority (SOA) record if you need to reduce the amount of time that the client computers cache DNS records?


Options are :

  • Expires After
  • Minimum (Default) TTL
  • Refresh Interval
  • Retry Interval

Answer : Minimum (Default) TTL

You are the administrator for your company network. Your network contains an Active Directory domain. The domain contains a domain controller named Server1 that has the DNS Server role installed. Server1 hosts a primary zone for the domain. The domain contains a member server named Server2 that is configured to use Server1 as its primary DNS server. From Server2, you run nslookup.exe. The DNS request times out, showing the default server as unknown. What should you do if you need to ensure that when you run Nslookup that the correct name of the default server is displayed?


Options are :

  • Create a reverse lookup zone on Server1.
  • Modify the security settings of the primary zone on Server1.
  • Add the primary zone to the DNS suffix list from Advanced TCP/IP Settings on Server1.
  • Add the primary zone to the DNS suffix list from Advanced TCP/IP Settings on Server2.

Answer : Create a reverse lookup zone on Server1.

Microsoft Dynamics Expand and Test Your Skills Practice Test Set 1

You are the administrator for your company network. The network consists of a single Active Directory domain named abc.com. You have a server named Server1 that runs a custom network application. Server1 has the following IP addresses: ? 192.168.15.10 ? 192.168.15.11 What should you do if you need to ensure that a client computer resolves Server1.abc.com to only the 192.168.15.11 IP address?


Options are :

  • Edit the LMHOSTS file.
  • Run ipconfig.exe /flushdns.
  • Edit the HOSTS file.
  • Run netsh interface ipv4 reset.

Answer : Edit the HOSTS file.

You are the administrator for your company network. Your network contains an Active Directory domain named abc.com. You currently have an intranet website that is hosted by two Windows Server 2016 web servers named Web1 and Web2. Users use the name intranet.abc.com to request the website and use DNS round robin. You plan to implement the NLB feature on Web1 and Web2. What should you do if you need to make changes to the DNS records for the planned implementation?


Options are :

  • Create two resource records for intranet.abc.com. Point one record to Web1 and point one record to Web2.
  • Create a new host (A) record named Intranet. Remove both host (A) records for Web1 and Web2.
  • Delete both host (A) records named Intranet. Create a pointer (PTR) record for each web server.
  • Delete one of the host (A) records named Intranet. Modify the remaining host (A) record named Intranet.

Answer : Create two resource records for intranet.abc.com. Point one record to Web1 and point one record to Web2.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions