Microsoft Windows Server 2016 Certification: Exam 70-741 Set 2

You are the administrator for your company network. You and a colleague are discussing SLB. Which of the following processes inbound network traffic and maps Virtual IPs (VIPs) to Dynamic IPs (DIPs), then forwards the traffic to the correct DIP?


Options are :

  • Host Agent
  • Northbound Application Program Interfaces (API)
  • System Center Virtual Machine Manager (SCVMM)
  • SLB Multiplexer (MUX) (Correct)

Answer : SLB Multiplexer (MUX)

You are the administrator for your company network. You have an Active Directory domain. The domain contains Windows Server 2016 Hyper-V hosts named Server1 and Server2. The Hyper-V hosts are configured to use Network Virtualization Generic Route Encapsulation (NVGRE) for network virtualization. You have six virtual machines that are connected to an external switch. The virtual machines are configured as shown here. Virtual Machine   Hyper-V Host     IP Address          Netmask           GRE Key VM1                         Server1              192.168.1.16         255.255.255.0        16 VM2                         Server2              192.168.1.232       255.255.255.0         32 VM3                         Server3              192.168.1.32         255.255.255.0          32 VM4                         Server4              192.168.1.25          255.255.255.0        25 VM5                         Server5              192.168.1.116       255.255.255.0         16 VM6                        Server6               192.168.1.132       255.255.255.0          32 What virtual machine or virtual machines can VM1 and VM3 connect to?


Options are :

  • VM1 can connect to VM5 only and VM3 can connect to VM2 and VM6 only. (Correct)
  • VM1 can connect to VM2 only and VM3 can connect to VM6 only.
  • VM1 can connect to VM2, VM3, VM5, and VM6 only and VM3 can connect to VM4, VM5, and VM6 only.
  • VM1 can connect to VM1, VM2, VM4, VM5, and VM6 only and VM3 can connect to VM6 only.

Answer : VM1 can connect to VM5 only and VM3 can connect to VM2 and VM6 only.

You are the administrator for your company network. You are planning to install Hyper-V. One benefit with Windows Server 2016 Hyper-V is that it now includes _______________, which allows one computer to directly access memory from the memory of another computer without the need of interfacing with either oneís operating system.


Options are :

  • NIC Teaming
  • Switch Embedded Teaming (SET)
  • Remote Direct Memory Access (RDMA) (Correct)
  • High-Performance Networking (HPN)

Answer : Remote Direct Memory Access (RDMA)

Microsoft Windows Server 2016 Certification: Exam 70-741 Set 6

You are the administrator for your company network. You have a Windows Server 2016 Hyper-V host named Server1 that has the following virtual switches: Virtual Switch Name           Virtual Switch Type            Physical Network Adapter Name vSwitch1                                External                                 NIC1 vSwitch2                                External                                 NIC2 You create a virtual machine named VM1. VM1 has two network adapters. One network adapter connects to vSwitch1. The other network adapter connects to vSwitch2. You configure NIC Teaming on VM1. What should you run if you need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the network?


Options are :

  • Add a new network adapter to VM1.
  • Create a new virtual switch on Server1.
  • Modify the properties of vSwitch1 and vSwitch2.
  • Run the Set-VmNetworkAdapter cmdlet. (Correct)

Answer : Run the Set-VmNetworkAdapter cmdlet.

You are the administrator for your company network. You have a Windows Server 2016 Hyper-V host named Server1 that hosts several virtual machines. Each virtual machine has two network adapters. Server1 also contains several virtual switches. On Server1, you create a NIC Team that has two network adapters. You discover that the NIC Team is set to Static Teaming mode. What cmdlet should you use if you need to modify the NIC Teaming mode to Switch Independent?


Options are :

  • Set-NetLbfoTeam (Correct)
  • Set-NetLbfoTeamNic
  • Set-VMNetworkAdapter
  • Set-VMSwitch

Answer : Set-NetLbfoTeam

You are the administrator for your company network. You and a colleague are discussing Switch Embedded Teaming (SET). You know that there are requirements when adding members to a SET group. What is a requirement of SET?


Options are :

  • All members of the SET group can be different adapter types from the same manufacturer.
  • All members of the SET group can be different adapter types from different manufacturers.
  • All members of the SET group must be identical adapter types from the same manufacturer. (Correct)
  • There are no requirements to becoming a member of a SET group.

Answer : All members of the SET group must be identical adapter types from the same manufacturer.

Microsoft Windows Server 2016 Certification: Exam 70-741 Set 3

You are the administrator for your company network. You have a Windows Server 2016 failover cluster that contains four nodes. Each node has four network adapters. The network adapters on each node are configured as shown in the following table: Network Adapter Name      Cluster Network Name         Link Speed NIC1                                          ClusterNetwork1                       1 Gbps NIC2                                        ClusterNetwork2                         1 Gbps NIC3                                        ClusterNetwork3                        1 Gbps NIC4                                        ClusterNetwork4                       10 Gbps NIC4 supports Remote Direct Memory Access (RDMA) and Receive Side Scaling (RSS). The cluster networks are configured as shown in the following table: Cluster Network Name               Metric              Role ClusterNetwork1                            39984                 1 ClusterNetwork2                            39983                 1 ClusterNetwork3                          79984                   3 ClusterNetwork4                         79840                    3 What should you do if you need to ensure that ClusterNetwork4 is used for Cluster Shared Volumes (CSVs) redirected traffic?


Options are :

  • Set the metric of ClusterNetwork4 to 30,000 and disable SMB Multichannel. (Correct)
  • Set the metric of ClusterNetwork4 to 90,000 and disable SMB Multichannel.
  • On each server, replace NIC4 with a 1 Gbps network adapter.
  • On each server, enable RDMA on NIC4.

Answer : Set the metric of ClusterNetwork4 to 30,000 and disable SMB Multichannel.

You are the administrator for your company network. You and a colleague are discussing NIC Teaming. You know that you can set up NIC Teaming by using Server Manager or PowerShell and that different configuration models are available. If you want all the NIC adapters to be connected to the same switch, what is this configuration called?


Options are :

  • Switch Dependent (Correct)
  • Switch Reliant
  • Switch Independent
  • Switch Autonomous

Answer : Switch Dependent

You are the administrator for your company network. Your network contains an Active Directory domain. The domain contains a Windows Server 2016 server named Server1 that has the Hyper-V server role installed. Server1 has a virtual switch named Switch1. You replace all of the network adapters on Server1 with new network adapters that support SR-IOV. What actions should you perform if you need to enable SR-IOV for all of the virtual machines on Server1? (Choose two.)


Options are :

  • Delete and then re-create the Switch1 virtual switch. (Correct)
  • Modify the Advanced Features settings of the network adapter on each virtual machine.
  • Modify the BIOS settings on each virtual machine.
  • Modify the Hardware Acceleration settings of the network adapter on each virtual machine. (Correct)
  • Modify the settings of the Switch1 virtual switch.

Answer : Delete and then re-create the Switch1 virtual switch. Modify the Hardware Acceleration settings of the network adapter on each virtual machine.

Microsoft Dynamics Expand and Test Your Skills Practice Test Set 1

You are the administrator for your company network. You have 10 Windows Server 2016 Hyper-V hosts. Each Hyper-V host has eight virtual machines that run a distributed web application named App1. You plan to implement a Software Load Balancing (SLB) solution for client access to App1. You deploy two new virtual machines named SLB-VM1 and SLBVM2. What components should you install if you need to install the required components on the Hyper-V hosts and the new servers for the planned implementation? (Choose two.)


Options are :

  • Install SLB Host Agent on SLB-VM1 and SLB-VM2.
  • Install Network Load Balancing (NLB) on SLB-VM1 and SLB-VM2.
  • Install SLB Multiplexer (MUX) on SLB-VM1 and SLB-VM2. (Correct)
  • Install SLB Host Agent on each Hyper-V host. (Correct)
  • Install SLB Multiplexer (MUX) on each Hyper-V host.
  • Install Host Guardian Service server role on each Hyper-V host.

Answer : Install SLB Multiplexer (MUX) on SLB-VM1 and SLB-VM2. Install SLB Host Agent on each Hyper-V host.

You are the administrator for your company network. You and a colleague are discussing NIC Teaming. You know that you can set up NIC Teaming by using Server Manager or PowerShell and that different configuration models are available. If you want each NIC adapter connected into a different switch, what is this configuration called?


Options are :

  • Switch Dependent
  • Switch Reliant
  • Switch Independent (Correct)
  • Switch Autonomous

Answer : Switch Independent

You are the administrator for your company network. You have a Windows Server 2106 virtual machine named Server1 that you plan to use as part of a Software Defined Networking (SDN) solution. What should you install if you need to implement the Border Gateway Protocol (BGP) on Server1?


Options are :

  • Peer Name Resolution Protocol (PNRP) feature
  • Network Device Enrollment Service role service
  • Network Policy and Access Services server role
  • Routing Role service (Correct)

Answer : Routing Role service

70-647 Pro Windows Server 2008 Enterprise Administrator Exam Set 1

You are the administrator for your company network. You have a Windows Server 2016 Hyper-V host named Server1 that has two network adaptors named NIC1 and NIC2. Server2 has two virtual switches named vSwitch1 and vSwitch2. N1C1 connects to vSwitch1. NIC2 connects to vSwitch2. Server1 hosts a virtual machine named VM1. VM1 has two network adapters named vmNIC1 and vmNIC2. vmNIC1 connects to vSwitch1 and vmNIC2 connects to vSwitch2. What should you run on VM1 if you need to create a NIC Team on VM1?


Options are :

  • $var1 = "LACP" $var2 = "Dynamic"
  • $var1 = "Static" $var2 = "HyperVPort"
  • $var1 = "SwitchIndependent" $var2 = "TransportPorts" (Correct)
  • $var1 = "SwitchIndependent" $var2 = "HyperVPort"

Answer : $var1 = "SwitchIndependent" $var2 = "TransportPorts"

You are the administrator for your company network. You and a colleague are discussing enabling and configuring network QoS with DCB using PowerShell. What command will obtain the DCB Exchange settings?


Options are :

  • Set-NetOosDcbxSetting
  • Get-NetQosDcbxSetting (Correct)
  • Get-NetQosDcbxControl
  • Set-NetQosDcbxControl

Answer : Get-NetQosDcbxSetting

You are the administrator for your company network. You decide to implement Switch Embedded Teaming (SET). You and a colleague are discussing creating a new SET team. You must configure it so that you have member adapters and load balancing mode configured. Which load balancing mode ensures that outbound loads are distributed based on a hash of the TCP ports and IP addresses while also rebalancing loads in real time so that a given outbound flow can move back and forth between SET team members?


Options are :

  • Dynamic (Correct)
  • Dynamic Hyper-V
  • Hyper-V Port
  • Outbound

Answer : Dynamic

Microsoft Dynamics Expand and Test Your Skills Practice Test Set 1

You are the administrator for your company network. You are discussing using Switch Embedded Teaming (SET) as an alternative to NIC Teaming. What else does SET allow you to do?


Options are :

  • Allows an administrator to combine a group of physical adapters (minimum of one adapter and a maximum of eight adapters) into hardware-based virtual adapters
  • Allows an administrator to combine a group of physical adapters (minimum of one adapter and a maximum of eight adapters) into software-based virtual adapters (Correct)
  • Allows an administrator to combine a group of virtual adapters (minimum of one adapter and a maximum of eight adapters) into software-based virtual adapters
  • Allows an administrator to combine a group of virtual adapters (minimum of one adapter and a maximum of eight adapters) into hardware-based virtual adapters

Answer : Allows an administrator to combine a group of physical adapters (minimum of one adapter and a maximum of eight adapters) into software-based virtual adapters

You are the administrator for your company network. You have two Windows Server 2016 Hyper-V servers named Server1 and Server2. You want a dedicated area created on the physical network adapter for each virtual network adapter to use. What is this feature called?


Options are :

  • Remote Direct Memory Access (RDMA)
  • Multipath I/O (MPIO)
  • Virtual Machine Queue (VMQ) (Correct)
  • Single root I/O virtualization (SR-IOV)

Answer : Virtual Machine Queue (VMQ)

You are the administrator for your company network. You and a colleague are discussing a feature that allows a systemís network adapter to spread the network processing between multiple processor cores in systems that have a multicore processor. What is this called?


Options are :

  • Receive Side Scaling (RSS) (Correct)
  • Remote Direct Memory Access (RDMA)
  • Switch Embedded Teaming (SET)
  • Virtual Machine Queue (VMQ)

Answer : Receive Side Scaling (RSS)

Microsoft Windows Server 2016 Certification: Exam 70-741 Set 2

You are the administrator for your company network. You and a colleague are discussing virtual Receive Side Scaling (vRSS). vRSS is a Windows Server 2016 feature that allows virtual network adapters to distribute the load across multiple virtual processors in a virtual machine. vRSS can work with many different types of technologies, including which of the following?


Options are :

  • IPv4 and IPv6
  • Transmission Control Protocol (TCP) and User Datagram Protocol (UDP)
  • Live Migration
  • Network Virtualization using Generic Routing Encapsulation (NVGRE)
  • All of the above (Correct)

Answer : All of the above

You are the administrator for your company network. You and a colleague are discussing Receive Side Scaling (RSS). You know that it allows a systemís network adapter to spread the network processing between multiple processors. RSS has the ability to work with systems that have more than how many processors?


Options are :

  • 12
  • 24
  • 36
  • 64 (Correct)

Answer : 64

You are the administrator for your company network. You are planning to enable virtual Receive Side Scaling (vRSS). What two PowerShell commands can you run to enable vRSS?


Options are :

  • Enable-NetAdapterRSS -Name "AdapterName" or Set-NetAdapterRSS -Name "AdapterName" -Enabled $False
  • Enable-NetAdapterRSS -Name "AdapterName" or Set-NetAdapterRSS -Name "AdapterName" -Enabled $True (Correct)
  • Enable-NetAdapterVRSS -Name "AdapterName" or Set-NetAdapterRSS -Name "AdapterName" -Enabled $False
  • Enable-NetAdapterVRSS -Name "AdapterName" or Set-NetAdapterRSS -Name "AdapterName" -Enabled $True

Answer : Enable-NetAdapterRSS -Name "AdapterName" or Set-NetAdapterRSS -Name "AdapterName" -Enabled $True

Microsoft Windows Server 2016 Certification: Exam 70-741 Set 4

You are the administrator for your company network. You are planning to disable virtual Receive Side Scaling (vRSS). What two PowerShell commands can you run to disable vRSS?


Options are :

  • Disable-NetAdapterRSS -Name "AdapterName" or Set-NetAdapterRSS -Name "AdapterName" -Enabled $False (Correct)
  • Disable-NetAdapterRSS -Name "AdapterName" or Set-NetAdapterRSS -Name "AdapterName" -Enabled $True
  • Disable-NetAdapterVRSS -Name "AdapterName" or Set-NetAdapterRSS -Name "AdapterName" -Enabled $False
  • Disable-NetAdapterVRSS -Name "AdapterName" or Set-NetAdapterRSS -Name "AdapterName" -Enabled $True

Answer : Disable-NetAdapterRSS -Name "AdapterName" or Set-NetAdapterRSS -Name "AdapterName" -Enabled $False

You are the administrator for your company network. You and a colleague are discussing a feature that allocates multiple queues to a single virtual machine, and each queue has its own affinity settings to a core. What is this new Windows Server 2016 feature called?


Options are :

  • Receive Side Scaling (RSS)
  • Remote Direct Memory Access (RDMA)
  • Switch Embedded Teaming (SET)
  • Virtual Machine Multi-Queue (VMMQ) (Correct)

Answer : Virtual Machine Multi-Queue (VMMQ)

You are the administrator for your company network. You have a Windows Server 2016 Hyper-V machine and you want to control the traffic that is generated by the virtual machine. What is the name of the Hyper-V feature that allows you to do this?


Options are :

  • Switch Embedded Teaming (SET)
  • Virtual Receive Side Scaling (vRSS)
  • Virtual Machine Quality of Service (vmQoS) (Correct)
  • Virtual Machine Multi-Queue (VMMQ)

Answer : Virtual Machine Quality of Service (vmQoS)

Microsoft Windows Server 2016 Certification: Exam 70-741 Set 4

You are the administrator for your company network. You and a colleague are discussing Data Center Bridging (DCB). You plan to install DCB using PowerShell. What PowerShell cmdlet do you use to enable DCB, including the management tools?


Options are :

  • Install-WindowsFeature -Name Data Center Bridging -IncludeManagementTools
  • Install-WindowsFeature -Name Data-Center-Bridging -IncludeManagementTools (Correct)
  • Install-WindowsFeature -Name DCB -IncludeManagementTools
  • Install-Feature -Name Data Center Bridging -IncludeManagementTools

Answer : Install-WindowsFeature -Name Data-Center-Bridging -IncludeManagementTools

You are the administrator for your company network. You have a Windows Server 2016 server named Server1 that will be used as a virtual private network (VPN) server. What VPN protocol should you use if you need to configure Server1 to support VPN Reconnect?


Options are :

  • Internet Key Exchange Protocol Version 2 (IKEv2) (Correct)
  • Layer 2 Tunneling Protocol (L2TP)
  • Point-to-Point Tunneling Protocol (PPTP)
  • Secure Socket Tunneling Protocol (SSTP)

Answer : Internet Key Exchange Protocol Version 2 (IKEv2)

Microsoft Windows Server 2016 Certification: Exam 70-741 Set 6

You are the administrator for your company network. You have a Windows Server 2016 server named Server1 that is located on the perimeter network and only uses inbound TCP port 443 to connect from the Internet. You install the Remote Access server role on Server1. You need to configure Server1 to accept VPN connections over port 443. Which VPN protocol should you use?


Options are :

  • Internet Key Exchange Protocol Version 2 (IKEv2)
  • Layer 2 Tunneling Protocol (L2TP)
  • Point-to-Point Tunneling Protocol (PPTP)
  • Secure Socket Tunneling Protocol (SSTP) (Correct)

Answer : Secure Socket Tunneling Protocol (SSTP)

You are the administrator for your company network. You create a VPN connection that has the VPN type set to Automatic. What VPN protocol will be used first when attempting to establish a VPN connection?


Options are :

  • Internet Key Exchange Protocol Version 2 (IKEv2) (Correct)
  • Layer 2 Tunneling Protocol (L2TP)
  • Point-to-Point Tunneling Protocol (PPTP)
  • Secure Socket Tunneling Protocol (SSTP)

Answer : Internet Key Exchange Protocol Version 2 (IKEv2)

You are the administrator for your company network. You have an Active Directory domain. The domain contains Windows Server 2016 servers named Server1 and Server2. On Server1, you install the Remote Access server role. On Server2, you install the Network Policy and Access Services server role. What should you do if you need to configure Server1 to use Server2 as a Remote Authentication Dial-In User Service (RADIUS) server?


Options are :

  • Configure the authentication provider from Routing and Remote Access. (Correct)
  • Create a Connection Manager profile from the Connection Manager Administration Kit.
  • Create an Access Policy from Server Manager.
  • Modify the Delegation settings of the Server1 computer account from Active Directory Users and Computers.

Answer : Configure the authentication provider from Routing and Remote Access.

70-642 Windows Server 2008 Network Infrastructure Exam Set 5

You are the administrator for your company network. The network contains one Active Directory domain named abc.com. You deploy DirectAccess on the network. During the deployment, you enable DirectAccess only for a group called ABC\Test Computers. What should you do if you need to enable DirectAccess for all the client computers in the domain after the initial installation?


Options are :

  • Modify the membership of the Windows Authorization Access Group from Active Directory Users and Computers.
  • Modify the security filtering of an object named DirectAccess Client Setting Group Policy from Group Policy Management. (Correct)
  • Run the Set-DAClient cmdlet using PowerShell.
  • Run the Set-DirectAccess cmdlet using PowerShell.

Answer : Modify the security filtering of an object named DirectAccess Client Setting Group Policy from Group Policy Management.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions