Microsoft 70-642 Windows Server Network Infrastructure Exam Set 8

You work as a network administrator for Testking Inc. The company has a network environment Windows Server 2008. The network has fifteen Member Server Windows Server 2008. All client computers on the network run Windows XP Professional. You have set up a DHCP server on the network to automatically assign IP-addresses to client computers. You install a new computer for the user named Rick. Rick complains that he can not access network resources. You run IPCONFIG on your computer and get the following information about the IP configuration: Other users are not faced with the same problem. What is the most likely cause?


Options are :

  • DHCP server is not running on the network.
  • None
  • DNS server is not running on the network.
  • Set TCP / IP protocol is not installed on his computer
  • The computer can not connect to a DHCP server.

Answer :The computer can not connect to a DHCP server.

Microsoft 70-243 Administering Deploying System Manager Exam Set 2

Your organization uses the address 172.16.30.0/22 ??IPv4 network. All client computers run Windows Vista domain. Host (IP-address 172.16.8.111, subnet mask 255.255.252.0) can not connect to HostB (IP-address 172.16.12.23, subnet mask 255.255.252.0) using NetBIOS broadcasting. What is the most likely explanation for this problem?


Options are :

  • The DHCP server on the network is offline.
  • Host and HostB used incorrect subnet mask.
  • Host and HostB use different default gateway address.
  • None
  • Host and HostB are on different IP subnets.

Answer :Host and HostB are on different IP subnets.

Your organization consists of an Active Directory domain in which all servers run Windows Server 2008 and all client computers are laptops that run Windows Vista with Service Pack 1. You need to configure TCP / IP on the computer so that users can easily connect to both corporate network that uses static IP-addressing, as well as their own home networks that use dynamic addressing. What are these steps?


Options are :

  • Using an alternative configuration functions to configure the laptops with static secondary address.
  • Configure users' computers with APIPA IP-addresses.
  • None
  • Using the alternative function settings to configure the laptops with static primary IP-addresses.
  • Setting up users with addresses IPv6.

Answer :Using an alternative configuration functions to configure the laptops with static secondary address.

You work as a network administrator for TestKingInc. The company has a network environment Windows Server 2008. All client computers on the network run Windows XP Professional. The DHCP server is configured on the network. You want to add a DHCP scope on a DHCP server for computers in a department called Research with the following information: Which of the following steps you take to accomplish this task? Each correct answer presents part of the solution. Choose two.


Options are :

  • Open a command prompt on the DHCP server, and then execute the command NETSH DHCP-server.
  • In the DHCP server scope> prompt, run the ADD SCOPE 192.168.2.0 255.255.255.0 Research.
  • Open a command prompt on the DHCP server, and then execute SERVER SCOPE NETSH DHCP.
  • On the DHCP server> prompt, run the ADD SCOPE 192.168.2.0 255.255.255.0 Research.

Answer :Open a command prompt on the DHCP server, and then execute the command NETSH DHCP-server. On the DHCP server> prompt, run the ADD SCOPE 192.168.2.0 255.255.255.0 Research.

Microsoft 70-647 Windows Enterprise Administrator Exam Set 8

You work as a network administrator for Testking Inc. The company has a network environment Windows Server 2008. All client computers on the network run Windows XP Professional. DHCP server named DHCPSERV configured on the network. You want to record DHCPSERV activity to a text file to monitor and troubleshoot the DHCP-server performance. Enable audit logging on DHCPSERV of the DHCP console. You want to change the default location of the log file in the C: \ DHCPlog. Which of the following steps you will take to accomplish this task? Each correct answer presents part of the solution. Select all that apply.


Options are :

  • Open a command prompt and run on DHCPSERV Netsh DHCP command.
  • Open a command prompt on DHCPSERV and then click the DHCP-server Netsh.
  • On the DHCP server> prompt, run the SET Auditlog C: \ DHCPlog.
  • Stop and restart the DHCP service on DHCPSERV.

Answer :Open a command prompt on DHCPSERV and then click the DHCP-server Netsh. On the DHCP server> prompt, run the SET Auditlog C: \ DHCPlog. Stop and restart the DHCP service on DHCPSERV.

Your organization is organized as a single Active Directory forest with a single domain. All servers run Windows Server 2008. The staff includes a DNS server in Windows Server 2008 on which Active Directory integrated zone is located. You install Windows Server 2008, the DNS-server in the branch with a standard secondary zone that pulls updates from the master server at the headquarters. You get complaints from users in the branch office, that the relationship between him and the WAN headquarters is slow. You suspect that the bottleneck produced DNS zone replication traffic. What are these steps?


Options are :

  • Enable Round-Robin on the primary DNS server at the headquarters.
  • Reduce the refresh interval on the SOA record in the zone of the primary DNS.
  • Remove the secondary DNS server and deploying RODC in the branch office.
  • Increase the update interval on the SOA record in the zone of the primary DNS.
  • None

Answer :Increase the update interval on the SOA record in the zone of the primary DNS.

You work as a network administrator for Testking Inc. The company has a Windows Server 2008 domain-based network. The network consists of three member servers and Windows Server 2008 150 Windows Vista client computers. You want to set up a VPN so that employees working remotely can access the company's private network over the Internet. You want to use the connection Layer 2 Tunneling Protocol (L2TP). Which of the following protocols will be used to ensure security and data protection on the VPN?


Options are :

  • Microsoft Point-to-Point Encryption (MPPE)
  • Internet Protocol Security (IPSec)
  • None
  • Transport Layer Security (TLS)
  • Protocol "point to point" (PPP)

Answer :Internet Protocol Security (IPSec)

Microsoft 70-642 Windows Server Network Infrastructure Exam Set 8

You are a network administrator for your company. Servers on the company's network run Windows Server 2008. The company's network consists of a single Active Directory domain. named DNS1 server configured as a domain name server (DNS), and stores the directory-integrated DNS zone for your company. You promote a member server to a domain controller, but you will find that service record (SRV) for the new domain controller is not established in directoryintegrated DNS zone. What you need to do to create the SRV record for the new domain controller with the least administrative effort?


Options are :

  • Restart the DHCP-client service.
  • Manually add the SRV record for the new domain controller.
  • None
  • Setting properties for the forward lookup zone to allow only secure updates.
  • Restart the Netlogon.

Answer :Restart the DHCP-client service.

You work as a network administrator for TestKingInc. The company has a network environment Windows Server 2008. The user complains that he is unable to gain access to network resources. Other network users have encountered such a problem. Running IPCONFIG / all command on your computer, the following result: You know that the address assigned to the user's computer by using APIPA function. You want to make sure that the user's computer is configured with a valid static IP-address if the computer is unable to obtain a lease from a DHCP server. Which of the following do you perform to accomplish the task?


Options are :

  • None
  • Setting another DHCP-server in the network. Define a separate sphere of IP-address on the new server instead of the previous one.
  • Setting a user's computer to an alternate configuration.
  • Disable APIPA on the client computer.
  • Setting up a client computer with a static IP-address, rather than adjusting it to the IP-address automatically.

Answer :Setting a user's computer to an alternate configuration.

You are the administrator for your organization. You have two groups, sales and marketing, which use a laser printer. Group sales prints many invoices and quotes companies. The marketing group typically print large presentations that take a long time to print. You want to sale GroupA YS documents for printing to marketing group. How do I install it?


Options are :

  • Assigning priority group marketing and sales group of 99 priority 1.
  • Appointment marketing group priority 100, and Group sales priority 1.
  • Assigning priority group marketing and sales group 1 priority 100.
  • None
  • Purpose Marketing Group priority 1 and priority group sales from 99.

Answer :Purpose Marketing Group priority 1 and priority group sales from 99.

70-662 Microsoft Exchange Server 2010 Configuring Exam Set 2

Your corporate network consists of a single Active Directory domain. The network consists of 3 and 10 domain member servers controllers, all of which run Windows Serve 2008. All client computers in the domain run Windows Vista Enterprise. Because of the security policy, the network is not connected to the Internet. The network comprises a server named DNS01, which contained the standard primary zone for the domain. You need to configure DNS01 such a way that if a DNS client requests a name outside of the company network, DNS01 will not attempt to contact DNS-servers outside the network. What are these steps?


Options are :

  • Remove root hints on DNS01.
  • Execute the command DNSCmd / ClearCache on DNS01.
  • None
  • Disabling recursion on DNS01.
  • Make sure that DNS01 not configured to use forwarders.

Answer :Disabling recursion on DNS01.

You are a network administrator for your company. The company's network includes servers running Windows Server 2008. The server named DNS1 is configured as a domain name server (DNS) in the network to handle the name resolution from users. DNS1 contains the main zone that contains the DNS data for your network users. You will find that the main zone on DNS1 contains entries for computers that no longer exist on the network. What you need to do is to immediately start scavenging stale resource records?


Options are :

  • Right-click the DNS server node in the DNS Manager snap-in and select the Scavenge Stale resource records.
  • None
  • Right-click the DNS server node in the DNS Manager snap-in, and then click Set Aging / purge option for all zones.
  • Select zapiseya Scavenge stale resource in the dialog box / Scavenging Properties aging zone.
  • Select Enable automatic cleanup option obsolete entries on the Advanced tab in the DNS Server Properties dialog box.

Answer :Right-click the DNS server node in the DNS Manager snap-in and select the Scavenge Stale resource records.

You administer the company's network, which consists of a single Active Directory domain. Network is not connected to the Internet. The network consists of two controllers in Windows Server 2008 domain member servers, 10 Windows Server 2008 and Windows Vista 100 client computers. Server01 receives basic standard DNS zone for the Active Directory domain. You must make sure that if a client requests a DNS Server01 to resolve external names, the Server01 will not attempt to contact DNS-servers outside the corporate network. What should you do?


Options are :

  • Cleanup DNS-server cache.
  • Delete all the records on the Root Hints tab.
  • Remove all forwarders Forwarders tab.
  • None
  • Disable recursion.

Answer :Disable recursion.

70-662 Microsoft Exchange Server 2010 Configuring Exam Set 2

You hired a small company for the introduction of new systems of Windows Server 2008. The company wants you to configure the server for the home folder locations users . Which type of server you setup?


Options are :

  • None
  • PDC server
  • Exchange server
  • File server
  • web server

Answer :File server

You are the system administrator of your company. The company's network is configured to use Internet Protocol version 6 (IPv6). You install the server Dynamic Host Configuration Protocol (DHCP) server named DHCP1, which runs Windows Server 2008. You will want to make sure that no IP-address or other configuration parameters automatically allocated to DHCP clients on a subnet that does not use DHCPv6 from DHCP1, How should I configure Managed address configuration flag, and the other Stateful configuration flag in the router advertisements?


Options are :

  • None
  • Set as Managed Address Configuration Stateful and other configuration flags to 0 (zero).
  • Set Managed Address Configuration Flag to 1, and the other Stateful configuration flag to 0.
  • Managed Address Configuration Set flag to 0, and the other Stateful configuration flag to 1.
  • Set both Managed Address Configuration and Other Stateful Configuration flags to 1.

Answer :Set as Managed Address Configuration Stateful and other configuration flags to 0 (zero).

You configure a Windows Server 2008 member server named VPN01 to support NAP with VPN enforcement. Your network consists of a single Active Directory domain in which all servers are running all the client computers are running Windows Vista Windows Server 2008 and. You have installed Windows, based on PKI and operational. Another member of the server with NPS01 name is the Network Policy Server and the System Health Validator. You set up a NAP policy on VPN01 apply NAP to incoming VPN connections. What actions should you perform? (Choose two. Each correct answer represents a part of a unified solution.)


Options are :

  • Setting VPN01 as a RADIUS client.
  • Setting VPN01 as a RADIUS server.
  • Create a network policy on VPN01.
  • Create a network policy on NPS01.

Answer :Setting VPN01 as a RADIUS client. Create a network policy on NPS01.

Microsoft 70-647 Windows Enterprise Administrator Exam Set 7

You are a network administrator for your company. The network contains a Windows Server 2008 and Windows Vista computers. You set up for event forwarding FileSrv2 View events SRV2. On FileSrv2, you run a command WinRM quickconfig. Then on SRV2, you run the command wecutil Qc. Finally, add SRV2 account in the local Administrators group on FileSrv2. What should you do next?


Options are :

  • None
  • Create a customized view of SRV2.
  • Create a new subscription to FileSrv2.
  • Create a customized view of FileSrv2.
  • Create a new subscription to SRV2

Answer :Create a new subscription to SRV2

You are a network administrator for your company. All servers of the network run Windows Server 2008. You must install a server Dynamic Host Configuration Protocol (DHCP) network to client computers on the network to get the IP-address automatically from a DHCP server. You want to make sure that when you install the DHCP server, the server is automatically authorized. What should you do?


Options are :

  • Install a DHCP server on a server that is a domain member.
  • Install a DHCP server on a domain controller.
  • Install a DHCP server on a standalone server.
  • None
  • Install a DHCP server on the server, and members of the DHCP Relay Agent on the domain controller

Answer :Install a DHCP server on a domain controller.

You have updated all the servers in a single Active Directory domain of your company in a Windows Server 2008 on an intranet Web site SharePoint Server this organization is located at four different web servers. Web servers are configured with the same hardware, and each of them is assigned a unique address-the IP. You need to configure the network so that the incoming connection requests SharePoint evenly distributed over all four Web servers. What are these steps?


Options are :

  • Turning on the round robin DNS level zone.
  • Including the streamlining of the network mask at the DNS server level.
  • The inclusion of a circular on the DNS server level.
  • Including the streamlining of the network mask in the DNS zone level.

Answer :Turning on the round robin DNS level zone. The inclusion of a circular on the DNS server level.

70-247 Configuring and Deploying a Private Cloud Exam Set 3

Which of the following types of backups should be used to back up all the files that have changed since the last full backup or incremental backup and mark the files as having been backed up?


Options are :

  • copy
  • None
  • Normal
  • differentiated
  • additional

Answer :additional

Installing the file server role on Windows Server element named RES01 Server 2008 Creating a shared folder with the name of the scheme that will be available to members of the domain global group of engineers. Engineers members must be able to read and write files in the folder, but should not be given too many privileges to the folder. What are these steps?


Options are :

  • Provide a group of engineers, co-owner permission level scheme.
  • Provide a group of engineers Contributor permission level on the circuit.
  • Provide a group of engineers at the level of the owner's permission circuit.
  • Provide a group of engineers reading level permissions scheme.
  • None

Answer :Provide a group of engineers Contributor permission level on the circuit.

You are a network administrator for your company. The network contains a Windows Server 2008 and Windows Vista computers. You want to use event collection function on multiple server computers Windows 2008. You need to configure event subscription to computers, forward and collect events. What should you do? (Select all that apply.)


Options are :

  • Start the Windows Event Log.
  • Run the Windows Connect Now - Config Registrar service.
  • Start the Windows Event Collector.
  • Start the Windows Remote Management service.

Answer :Start the Windows Event Collector. Start the Windows Remote Management service.

70-646 Pro Windows Server 2008 - Server Administrator Exam Set 5

Mark works as a network administrator for Testking Inc. The company has a network directory in Windows 2003, one domain based on Active Directory. The network consists of five member servers and 150 Windows 2008, Windows Vista client computers. Assistant Brand wants to know about the benefits of the NTFS file system. Which of the following NTFS file system the benefits? Each correct answer presents a complete solution. Select all that apply.


Options are :

  • It offers a feature of disk quotas.
  • It supports the Encrypting File System (EFS).
  • It supports at file and folder permissions
  • It compresses.

Answer :It offers a feature of disk quotas. It supports the Encrypting File System (EFS). It supports at file and folder permissions It compresses.

Mark works as a network administrator for Testking Inc. The company has a Windows Server 2008 domain-based network. The domain consists of four domain controllers, member servers, two Windows 2008 and Windows Vista 50 and 100 Windows XP Professional client computers. The network has two subnets with subnet 192.168.0.0/24 and 192.168.1.0/24. Mark wants to scan the computers on the network using the Microsoft Baseline Security Analyzer tools (MSBA). All computers that he wants to scan the same subnet 192.168.0.0/24. Mark MBSA installs on the client computer with the name and works BSACOMP MBSA.EXE. After scanning the computers, he said that the report does not contain any data computers in the subnet 192.168.0.0/24. Mark wants to create a report that includes the results of all the computers in the subnet 192.168.0.0/24. What will he do to accomplish the task?


Options are :

  • In the MBSA tool, specify the hostnames of all the computers in the subnet 192.168.0.0/24.
  • In the MBSA tool, specify NetBios names of all the computers in the subnet 192.168.0.0/24.
  • In the MBSA tool, specify the subnet mask of the subnet 192.168.0.0/24.
  • In the MBSA tool, the IP-address range of 192.168.0.1 to 192.168.0.254 and start scanning.
  • None

Answer :In the MBSA tool, the IP-address range of 192.168.0.1 to 192.168.0.254 and start scanning.

You are a network administrator for your company. The company's network runs on Windows Server 2008. All client computers run Windows Vista. Do you have a branch and the main office. You have to control all the frames that pass over the network to a local buffer, regardless of the destination address. What should you do?


Options are :

  • Use of capture triggers
  • Use display filters
  • Use the mixed mode
  • Using the capture buffer
  • None

Answer :Use the mixed mode

70-247 Configuring and Deploying a Private Cloud Exam Set 4

Your network consists of a single Active Directory domain in which all servers are running Windows Server 2008 and client workstations running Windows Vista. You control the network from an administrative workstation called TOT. You want to set up Toth to get the data from the Windows event log of the domain controller named SERVER01. What actions should you perform? (Choose two. Each correct answer represents a part of a single decision).


Options are :

  • Run the command on wecutil Toth
  • Run the command on the command WinRM quickconfig SERVER01.
  • Run the command on wecutil SERVER01.
  • Execute the command WinRM quickconfig command to Thoth.

Answer :Run the command on wecutil Toth Run the command on the command WinRM quickconfig SERVER01.

You are a network administrator for your company. The network contains a Windows Server 2008 and Windows Vista computers. Computer name Print1 function as a print server to your network and run with Windows Server2008 Server Core. You have to manage printers on Print1 with Windows Vista Ultimate on the local computer. What tool should I use?


Options are :

  • None
  • Active Directory Users and Computers
  • server Manager
  • event viewer
  • Print management

Answer :Print management

You are a network administrator for your company. The company's network running Windows Server 2008. All client computers run Windows Vista. Do you have a file server named SERV1. SERV1 has shared folder. You enable disk quotas for a shared folder. You want to achieve the following objectives: Receive notification when a user copies of more than 500 MB of data in a shared folder. Make sure that users can not copy more than 500 MB of data to a shared folder. What should you do?


Options are :

  • Use passive screening.
  • Use of active screening.
  • Use strict quotas.
  • None
  • Use a soft quota.

Answer :Use strict quotas.

70-513 WCF Development with Microsoft .NET Framework 4 Exam Set 2

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions