IBM C2010-571 Tivoli Process Automation Engine V7.5 Exam Set 9

The output of a Key Performance Indicator (KPI) is based on a calculation type What is one of these types?


Options are :

  • Average
  • Fraction
  • Decimal
  • Count

Answer :Decimal

A business requires the blocking of status changes when a work order record is in workflow, unlocking at a certain point to perform a status change to APPR, and then relocking hen the status change occurs. Leveraging the workflow tool, what are the necessary data elements and steps to meet this requirement?


Options are :

  • In the Actions application, for the work order object, create the following Change Status type actions: OKSTATUS, WOAPPR, NOSTATUS. On the workflow connector line where the
  • In the Actions application, create an Action Group for the work order object with the following members in the following order: OKSTATUS, Work Order Approval action, NOSTATUS
  • To unlock the status change block, prior to the next status change, on a connector line
  • On the workflow connector line where the status block is to begin use the NOSTATUS action. To unlock the status change block, prior to the next status change, on a connector line
  • To unlock the status change block, prior to the next status change, on a connector line use the OKSTATUS and WOAPPR actions.

Answer :In the Actions application, create an Action Group for the work order object with the following members in the following order: OKSTATUS, Work Order Approval action, NOSTATUS

IBM Maximo Asset ManagementV7.5 Implementation Practice Test Set 1

Which statement is true about synonym domains?


Options are :

  • Synonyms can only be added to the application created with the Application Designer
  • Synonyms cannot be added to the values that ship with the product, but internal values can be modified or deleted
  • Synonyms can be added to the values that ship with the product, but internal values cannot be modified or deleted
  • Synonyms can only be added to the records managed by the SYNONYMS table

Answer :Synonyms can be added to the values that ship with the product, but internal values cannot be modified or deleted

When updating a Start Center's Key Performance Indicators (KPIs), which data element is required to facilitate polling of the system?


Options are :

  • Escalation
  • Conditional Expression
  • Action
  • Cron Task

Answer :Cron Task

Which three applications can be used to create work order hierarchies? (Choose three.)


Options are :

  • Job Plans
  • Preventive Maintenance
  • Work Order Tracking
  • Assignment Manager
  • Actions
  • Activities and Tasks

Answer :Job Plans Preventive Maintenance Work Order Tracking

C2010-505 IBM Smart Cloud Control Desk V7.5.1 IT Asset Test Set 1

A report can be added to an application's toolbar. Which check box must be enabled in order to print any associated documents when selecting this report?


Options are :

  • Enable the Print Associated Documents
  • Enable the Print Report Documents
  • Enable the Direct Print
  • Enable the Direct Print with Attachments

Answer :Enable the Direct Print with Attachments

When defining Security Groups which parameters can be specified?


Options are :

  • Users, Security, Data Restrictions and Access Rights
  • Users, Sites, Applications and Storerooms
  • Storerooms, Group, Person and Applications
  • Permissions, Applications, Locations and Departments

Answer :Users, Sites, Applications and Storerooms

Work management practices include not only the planning of the work, but also the recording (reporting) of who, what, where, when, and why. Which three application tabs or actions will meet this requirement? (Choose three.)


Options are :

  • Work Order Tracking application, Resources tab
  • Assignment Manager application, Start and Finish Assignment actions
  • Activities and Tasks application, Failure tab
  • Work Order Tracking application, Actuals tab
  • Assignment Manager application, Start and Stop Assignment Timer actions
  • Activities and Tasks application, Report Downtime action

Answer :Assignment Manager application, Start and Finish Assignment actions Work Order Tracking application, Actuals tab Activities and Tasks application, Report Downtime action

C2010-505 IBM Smart Cloud Control Desk V7.5.1 IT Asset Test Set 2

Which record must exist first in order to use a value in the Owner data field ot the Work Order Tracking application?


Options are :

  • Person
  • Labor
  • Owner
  • Lead

Answer :Person

A Customer wants to set up Start Centers to display to all users a list of their assignments for activities and tasks. Which application and applicable actions will meet this requirement?


Options are :

  • Create a Default query in the Activities and Tasks application and associate it with the Start Center Result Set portlet
  • Create a workflow process for the Activities and Tasks application and associate it with the Start Center Result Set portlet
  • Create a Public query in the Activities and Tasks application and associate it with the Start center Result Set portlet
  • Create a workflow process for the Activities and Tasks application and associate it with the Start Center Inbox/Assignment portlet

Answer :Create a Public query in the Activities and Tasks application and associate it with the Start center Result Set portlet

Which data elements are required to create and activate an organization?


Options are :

  • Base Currency, Default Item Status, Item Set, Company Set
  • Base Currency, Clearing Account, Item Master, Company Master
  • Clearing Account, Default Item Status, Item Master, Company Master
  • Base Currency, Clearing Account, Item Set, Company Set

Answer :Base Currency, Clearing Account, Item Set, Company Set

C2010-505 IBM Smart Cloud Control Desk V7.5.1 IT Asset Test Set 3

What can a user do when reassigning an active process to another person?


Options are :

  • Sends a notification
  • None
  • Assign new people to an active process
  • Change the status of the process
  • Attach a file to a process

Answer :Sends a notification

A customer would like end users to be able to submit service requests to multiple e-mail addresses. For example, facilities service requests should be sent to [email protected] and IT requests should be sent to [email protected] How should this be done using Tivoli process automation engine?


Options are :

  • A domain would be configured to receive the different e-mail addresses and generate corresponding service requests.
  • The E-mail Listener would be configured to receive multiple e-mail addresses and a corresponding change ticket would be generated.
  • The E-mail Listener can be configured to have listeners on multiple e-mail addresses
  • The E-mail Listener can only be configured to receive e-mails from one e-mail address.

Answer :The E-mail Listener can be configured to have listeners on multiple e-mail addresses

What is the default status of a new message created in the Bulletin Board application of a newly installed Tivoli process automation engine system?


Options are :

  • Ready
  • New
  • Draft
  • Active

Answer :Draft

C2010-505 IBM Smart Cloud Control Desk V7.5.1 IT Asset Test Set 4

A customer wants to ensure that any data sent to the Tivoli process automation engine's Integration Framework for retrieval of financial data into the Tivoli process automation engine cansurvive restarts and failures. Which statement is true?


Options are :

  • A JMS messaging engine must be configured with a persistent data store
  • The customer must have the persist data option set for the Integration Framework adapter.
  • The messages are stored local to the adapter and will survive failures without any additional configuration.
  • It can be configured by setting a property inside the Tivoli process automation engine after installation.

Answer :A JMS messaging engine must be configured with a persistent data store

Which two types of Migration packages can be defined?


Options are :

  • Push, Pull
  • Ad hoc, Defined
  • Dedicated, Run Time
  • Snapshot, Change

Answer :Snapshot, Change

Which factor is considered when creating a location system?


Options are :

  • All system locations share the same GL.
  • All system locations are related functionally.
  • All system locations are subsets of the primary hierarchies.
  • All system locations must be real places or spaces.

Answer :All system locations are related functionally.

IBM 000-797 Tivoli Identity Manager v4.5 Implementation Exam Set 1

Which factor would normally be considered when developing a primary location hierarchy?


Options are :

  • The organizational relationship between locations
  • The financial relationship between locations
  • The geophysical relationship between locations
  • The functional relationship between locations

Answer :The geophysical relationship between locations

Which database configuration element is used to validate an attribute's values?


Options are :

  • Attribute Type
  • Alias
  • Relationship
  • Domain

Answer :Domain

A customer needs to send e-mails to end users whenever they submit a service request to tell the end user that the service request has been submitted Which applications should be used to fulfill this request?


Options are :

  • Escalations, Service Request and E-mail Listener
  • Workflow, Service Request, E-mail Listener and Ticket Escalations
  • Ticket, Work Order, Cron Task, and Service Request
  • Workflow, Service Request and Communication Templates

Answer :Workflow, Service Request and Communication Templates

IBM 000-797 Tivoli Identity Manager v4.5 Implementation Exam Set 2

A client operates a multinational corporation with operating units around the world. The corporation will be acquiring a new unit in North America to expand an existing site operation andwants the new operation to use IBM Tivoli software. Initially this new unit will operate under its current GL account structure. What is the solution for the client to set up the new operation?


Options are :

  • Set up the new operation as a new organization.
  • Set up the new operation as a new location system under the existing site.
  • Set up the new operation as a site under the North American organization.
  • Set up the new operation in a separate database.

Answer :Set up the new operation in a separate database.

Why are classifications associated with stored records?


Options are :

  • To restrict data access
  • To ensure proper data storage
  • For financial reporting
  • To search for and retrieve historical records

Answer :To search for and retrieve historical records

The system administrator has configured Application Server security between Tivoli process automation engine and IBM Tivoli Directory Server. Where should the synchronization be scheduled to run?


Options are :

  • IT Infrastructure
  • LDAP Integration
  • Cron Tasks
  • Custom Code

Answer :Cron Tasks

IBM 000-797 Tivoli Identity Manager v4.5 Implementation Exam Set 3

Which tasks can the user perform from the Scheduling Status tab on Run Reports on the Report Administration application?


Options are :

  • Edit a report schedule; preview a report
  • View a report schedule; generate a report
  • Preview a report; generate a report
  • View a report schedule; edit a report schedule

Answer :View a report schedule; edit a report schedule

The building block of the Integration Framework enables applications to perform the following functions: publish and query application data; add, update, and delete application data; and import and export application data. What is this building block?


Options are :

  • Java message queuing
  • Web services
  • Extended Java objects
  • Object structure

Answer :Object structure

In addition to Action and Type, which field is required to save a new action regardless of the action type selected?


Options are :

  • Value
  • Parameter/Attribute
  • Memo
  • Accessible From

Answer :Accessible From

IBM 000-797 Tivoli Identity Manager v4.5 Implementation Exam Set 4

Which statement is true when discussing users?


Options are :

  • A person record requires a user record.
  • A labor record requires a user record.
  • A person record requires a labor record.
  • A user record requires a person record.

Answer :A user record requires a person record.

What is used to specify actions belonging to an action group?


Options are :

  • click the New Row button on the Members table view
  • click the Add New Member icon on the toolbar
  • click Select Members from the Select Action menu
  • click the Select Members button on the Action Tab

Answer :click the Select Members button on the Action Tab

What is the correct method to initiate an invocation channel?


Options are :

  • An action class
  • A Java Message Service (JMS) queue connection
  • Java system protocols
  • An invocation message

Answer :An action class

IBM 000-815 E-Business Solution Design Certify Practice Exam Set 1

How many Security Groups can be defined?


Options are :

  • No limit
  • 1
  • As restricted by license
  • 256

Answer :No limit

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions