E20-011 Storage Networking Design Management Practice Exam Set 3

Risk management starts with the identification and analysis risk.What are the other three steps?


Options are :

  • Design, build and document
  • None
  • Design, build and manage
  • Planning, creation and control
  • Plan, track and control

Answer :Plan, track and control

E10-110 Enterprise Content Management Certify Practice Exam Set 5

The amount of disk capacity is considered "overhead parity" with 8 + 1 RAID 5?


Options are :

  • None
  • 11%
  • 30%
  • 20%
  • 2.30%

Answer :11%

A compNone has implemented a single-threaded applications with a large number of sequential writes. The compNone has reached out to design a NAS storage solution for this application. There are budgetary constraints for the solution. What disk and RAID technology for this solution would you suggest?


Options are :

  • None
  • Fiber Channel and RAID 5
  • Fiber Channel and RAID 1/0
  • ATA and RAID 1
  • ATA and RAID 3

Answer :ATA and RAID 3

The elements that are an important process Capacity Management starting?


Options are :

  • incidents capacity
  • Loss Service
  • Storage capacity plan
  • None
  • CMDB

Answer :Storage capacity plan

E10-110 Enterprise Content Management Certify Practice Exam Set 4

Management capacity storage balances the needs of users and try to plan for future growth based on business trends. How far in advance will plan management capacity usually for future storage needs?


Options are :

  • 3-6 months
  • 12-18 months
  • 1-3 months
  • 6-12 months
  • None

Answer :12-18 months

What are the two database files with data from Microsoft Exchange Server 2003 stores?


Options are :

  • None
  • htm and EDB
  • EDB and STM
  • htm and txt
  • STM and .dbf

Answer :EDB and STM

The compNone has installed an FTP program to upload 500GB of files on a NAS device on a nightly basis. Why did the compNone choose to use UDP as a transport mechanism for implementation?


Options are :

  • UDP provides no flow control or error correction and provides a data transfer faster.
  • None
  • UDP is a stateless protocol, and can sustain a failover NAS
  • UDP ensures that data is routed to the correct location on the network.
  • UDP provides flow control and error correction to ensure that data is transferred correctly.

Answer :UDP provides no flow control or error correction and provides a data transfer faster.

E10-110 Enterprise Content Management Certify Practice Exam Set 2

The protocol provides flow control, packet sequencing and packet retransmission?


Options are :

  • None
  • Ethernet
  • IP
  • TCP
  • UDP

Answer :TCP

A customer who has intermittent application connector is connected to a NAS remote. A ping response shows a value varied milliseconds. What is the most likely cause of this behavior?


Options are :

  • Number of router hops
  • TCP handshake was unable to establish a session
  • UDP packet acknowledgment timeout
  • TCP window is too large
  • None

Answer :Number of router hops

A compNone is considering migrating to NFSv4 NFSv2 on your existing NAS device behind a firewall. What changes need to be treated in the network?


Options are :

  • Make sure the firewall allows the transfer of security IPSec
  • Make sure that the firewall allows the impact of Kerberos security
  • None
  • Make sure the firewall allows TCP ports needed
  • Make sure the firewall allows UDP ports required

Answer :Make sure the firewall allows TCP ports needed

E10-110 Enterprise Content Management Certify Practice Exam Set 3

Which layer Fiber Channel defines classes of service?


Options are :

  • None
  • FC1
  • FC0
  • FC4
  • FC2

Answer :FC2

A compNone has a network of Cisco does not change and plans to implement link aggregation on the NAS device. What link aggregation mechanism it would now implement?


Options are :

  • LACP orEtherChannel
  • None
  • VLAN
  • LACP
  • EtherChannel

Answer :LACP

What is the effect of activating the persistent port switch Off?


Options are :

  • It allows frames to be sent when the port is disabled
  • Prevents a switch port that is activated automatically by a reset switch
  • Stubbornly disables all ports on the switch
  • None
  • It prevents a transition from being restarted after one or more ports are disabled

Answer :Prevents a switch port that is activated automatically by a reset switch

E20-011 Storage Networking Design Management Practice Exam Set 1

What is a best industry practice for ISL load?


Options are :

  • Never exceed 50 percent utilization
  • Never exceed 33 percent utilization
  • Never exceed 60 percent utilization
  • None
  • Never exceed 80 percent utilization

Answer :Never exceed 80 percent utilization

What is a function of exchange based trunk?


Options are :

  • All frames within an exchange using ISL in the trunk
  • None
  • Each ISL carries traffic in one direction
  • All frames between a pair of N-ports use an ISL in the trunk
  • Frames within an exchange is distributed round-robin in all ISL in the trunk.

Answer :All frames within an exchange using ISL in the trunk

The protocol allows the client to prove their identity to the server and the server to prove their identity to the customer?


Options are :

  • IPSec
  • NFSv4
  • None
  • Kerberos
  • NTLM

Answer :Kerberos

E20-002 Cloud Infrastructure and Services Practice Exam Set 4

A compNone has purchased a NAS device with two (2) nodes; a it is active and the other is in standby mode. While a CIFS client uses a program, not the active node to the passive node. The user receives an error message that have been disconnected from the server. What is the problem?


Options are :

  • CIFS protocol is stateful and therefore a connection must be reestablished by the application or manually.
  • CIFS server error can not be a passive node; NAS failover is only for NFS.
  • None
  • The customer experienced a local failure network as a failover NAS device should not cause None interruption.
  • CIFS protocol is stateless and therefore a connection must be reestablished by the application or manually.

Answer :CIFS protocol is stateful and therefore a connection must be reestablished by the application or manually.

The compNone has launched a storage device SAN medium supply to your sales department. In the coming months, the compNone wants to implement a similar solution to meet their divisions SAN accounting and technology. Lagringsprovisione tasks must be handled by a special administrator in each division. What technical solution should be considered to minimize the total cost?


Options are :

  • None
  • separate switches for each department
  • Semi-mesh implementing administrative flexibility
  • switches collaborative application VSAN
  • specific tissue binding associated changes to specific administrators

Answer :switches collaborative application VSAN

What is an important factor to the size the memory requirements for a NAS device?


Options are :

  • TCP window size
  • Number of network hops of the client to the server
  • The number of files open simultaneously
  • None
  • RAID type used in the storage device

Answer :The number of files open simultaneously

E10-110 Enterprise Content Management Certify Practice Exam Set 6

A storage solutions designer wants to implement protection against theft HBA in a SAN WWN. What security measure that would allow this capability?


Options are :

  • zoning port
  • None
  • WWN zoning
  • lock port
  • lock port

Answer :zoning port

A host HBA reside in an existing VSAN 5 of fabric. The administrator must provide the host with access to a storage port in VSAN 6. If you move from HBA VSANs VSAN 5 to 6, as a result access is achieved?


Options are :

  • VSAN only 6
  • None
  • VSAN only 5
  • VSANs 5 and 6
  • ~~ standard POS = TRUNC VSAN

Answer :VSAN only 6

What mechanism can be used to match performance between sending and receiving device on a network?


Options are :

  • CiscoEtherChannel
  • None
  • LACP
  • Flow control
  • 802.1Q VLAN tagging

Answer :Flow control

E20-011 Storage Networking Design Management Practice Exam Set 4

What Fiber Channel layer is responsible for mapping the SCSI protocol frames FC?


Options are :

  • FC3
  • None
  • FC1
  • FC0
  • FC4

Answer :FC4

What layer of the OSI model is responsible for controlling the flow of data and guarantee data delivery?


Options are :

  • None
  • Transport
  • Request
  • Net
  • Datalink

Answer :Transport

What is the size of a giant plot?


Options are :

  • All larger than 1500 bytes; most 9000 bytes
  • Everything larger than 9000 bytes; 15,000 bytes commonly
  • None
  • Everything larger than 9000 bytes; 90,000 bytes commonly
  • Fixed at 9000 bytes

Answer :All larger than 1500 bytes; most 9000 bytes

E20-011 Storage Networking Design Management Practice Exam Set 1

What is the capacity to carry information from one medium?


Options are :

  • Broadband
  • To transfer
  • Propagation
  • latency
  • None

Answer :Broadband

What is the purpose of Kerberos in a NAS environment?


Options are :

  • None
  • Contains ACL that specifies access rights for files / folders
  • The necessary protocol to set up a virtual private network
  • Encrypts data traffic between client and server
  • It allows the customer to prove their identity to the server

Answer :It allows the customer to prove their identity to the server

According to the definition of Layer 1 of the FC protocol, what it is the size of a word transmission in bytes?


Options are :

  • $2
  • None
  • $10
  • $8
  • $4

Answer :$4

E20-011 Storage Networking Design Management Practice Exam Set 3

The compNone has implemented a NAS solution to store a large amount of data that is accessed through a single application server. The application server is used by a large number of users. During peak hours, the result of the implementation, the poor and the problem has been traced to an insufficient bandwidth for the NAS device. It is carried out by department head aggregation NAS to solve the problem and verify its operation. The next date is the same problem of performance during peak usage. What is the problem?


Options are :

  • The application server can only use the bandwidth of a single port on the link added
  • None
  • Trunking is not configured on the client computers.
  • The IT department does not provide enough ports to link aggregation.
  • NAS is using LACP while switch uses Cisco EtherChannel.

Answer :The application server can only use the bandwidth of a single port on the link added

Where they are kept in the file / folder ACL and permissions?


Options are :

  • Active Directory
  • None
  • File System
  • Kerberos KDC
  • NAS device

Answer :File System

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions