CompTIA PD1-001 PDI+ Beta Certification Practice Exam Set 27

A photo-interrupter sensor performs a function similar to a:


Options are :

  • solenoid.
  • diode.
  • switch.
  • relay.

Answer : switch.

A customer bought a SuperG3 high speed fax machine to send reports to the corporate office. The activity report shows it only communicates at 9.6Kbps to the corporate office. Which of the following should a technician recommend?


Options are :

  • Send the faxes on memory transmission.
  • SuperG3 may display as V.17 on the print-out.
  • Try to send the faxes after hours and see if the line speeds up.
  • The distant machine must also have SuperG3 capability.

Answer : The distant machine must also have SuperG3 capability.

JK0-016 CompTIA Network+ 2009 Edition Practice Exam Set 9

A magnetic roller is used in which of the following components?


Options are :

  • Transfer unit
  • Fuser unit
  • Developer unit
  • Laser unit

Answer : Developer unit

Which of the following components are found in the fuser unit?


Options are :

  • Heat roller
  • LED
  • Charge roller
  • Thermistor
  • Supply roller

Answer : Heat roller Thermistor

The customer wants to use their fax machine on a VoIP phone system. A technician should advise them that:


Options are :

  • the fax transactions wil occur much quicker and with fewer errors.
  • they need to install a DSL filter.
  • the fax should be directly connected to the RJ-45 jack.
  • fax transactions are not suitable for this system.

Answer : fax transactions are not suitable for this system.

A printer can produce good output of its internal test pages, but any job sent from the connected PC results in printing random characters. Which of the following is the MOST likely cause of this issue?


Options are :

  • Defective laser unit
  • Incorrect driver
  • Defective data cable
  • Defective printer port

Answer : Incorrect driver

Which of the following is the MOST common colors of toner used in a printing device?


Options are :

  • RGB
  • SWOP
  • DIC
  • CMYK

Answer : CMYK

Toner is moved from the photoconductor to the media during which of the following stages in the laser print process?


Options are :

  • Fusing
  • Development
  • Transfer
  • Writing

Answer : Transfer

CAS-003 CompTIA Advanced Security Practitioner (CASP+) Exam Set 6

The customer has DSL service and they are attempting to install a fax machine on the same line. Which of the following will al ow the fax machine to function properly?


Options are :

  • Connect a DSL filter between the fax machine and the RJ-11 telephone jack.
  • Change the line equalizer settings.
  • Reduce the modem speed on the fax machine.
  • Change the RJ-11 telephone jack to a RJ-45 jack.

Answer : Connect a DSL filter between the fax machine and the RJ-11 telephone jack.

The purpose of the registration roller is to:


Options are :

  • clean residual toner from the photoconductor.
  • synchronize the media with the developed image.
  • assist with transfer of toner to the media.
  • prevent media jams in the fusing section.

Answer : synchronize the media with the developed image.

Which of the following procedures should be performed with the use of an anti-static wrist strap?


Options are :

  • Cleaning the platen glass
  • Removing a paper tray
  • Upgrading the firmware
  • Replacing a circuit board

Answer : Replacing a circuit board

While a customer is describing a problem a technician should FIRST begin:


Options are :

  • testing the machine to see if it works.
  • reading the service history.
  • asking open ended questions.
  • taking apart the machine and troubleshooting.

Answer : asking open ended questions.

If the printer must be placed in a dusty environment, the customer should be informed that:


Options are :

  • increased maintenance may be necessary.
  • the machine wil use more toner than usual.
  • the machine should be covered during use.
  • the printer will perform slower.

Answer : increased maintenance may be necessary.

After completing the repair, which of the following should the technician do next?


Options are :

  • Verify device functionality.
  • Inform the user it is fixed.
  • Verify device serial number.
  • Document the solution.

Answer : Verify device functionality.

CompTIA JK0-022 E2C Security+ Compliance & Operational Exam Set 1

The residual toner remaining on a photoconductor is removed by which of the following laser printer components?


Options are :

  • Transfer unit
  • Cleaning unit
  • Developer unit
  • Fuser unit

Answer : Cleaning unit

A user reports that they are seeing portions of the image duplicated on the document that was just printed. Which of the following is the MOST likely cause?


Options are :

  • Developer unit
  • Laser unit
  • Fuser unit
  • Transfer section

Answer : Fuser unit

Which of the following protocols is used when sending a scanned document through email?


Options are :

  • POP3
  • SMTP
  • TELNET
  • DHCP

Answer : SMTP

Which of the following is the correct order; start to finish, of the following stages in the laser print process?


Options are :

  • Transfer, Development, Charge, Writing
  • Writing, Charge, Transfer, Development
  • Charge, Writing, Development, Transfer
  • Development, Charge, Writing, Transfer

Answer : Charge, Writing, Development, Transfer

When implementing a shared printer on the network, the driver resides on:


Options are :

  • the printer.
  • the switch.
  • a server.
  • a domain controller.

Answer : a server.

In an ink dispersion printer, which of the following is a type of ink?


Options are :

  • Iodine
  • Resin
  • Dye
  • Lanolin

Answer : Dye

Which of the following has the LEAST effect on color perception of a color print?


Options are :

  • The amount of sunlight entering the customers office
  • The media type the customer uses to print on
  • The font type used in the customers documents
  • The type of light bulbs in the customers office

Answer : The font type used in the customers documents

When copying a document, a technician observes that the copy has a band running from the lead edge to the trail edge that is lighter than the remainder of the copy. When printing an internal test page, the symptom does not occur. Which of the following components could contribute to this symptom?


Options are :

  • The developer unit
  • The laser unit
  • The photoconductor
  • The white reference plate

Answer : The white reference plate

CompTIA Network+ 6 Certification Practice Exams - 2019 Set 1

Which of the following is a type of removable memory card?


Options are :

  • Molex
  • Compact Flash
  • SCSI
  • Hard drive

Answer : Compact Flash

Which of the following sections of a multimeter would a technician use to measure the electrical signal controlling a typical type of electromechanical clutch used in printers?


Options are :

  • AC volt meter
  • Field strength meter
  • DC volt meter
  • Ohm meter

Answer : DC volt meter

Which of the following is a type of removable memory card?


Options are :

  • PCB card
  • ID card
  • SCSI card
  • SD card

Answer : SD card

APIPA is a form of:


Options are :

  • wireless encryption.
  • network protocol.
  • cable type.
  • dynamic IP addressing.

Answer : dynamic IP addressing.

Which of the following is required in order to successfully set up scan-to-email functionality?


Options are :

  • TWAIN settings
  • FTP settings
  • SMTP settings
  • IPX/SPX settings

Answer : SMTP settings

When making a copy through the ADF the output has a black streak from the lead edge to the trail edge. Outputs from the flatbed portion are acceptable. Which of the following steps should the technician take FIRST?


Options are :

  • Replace the complete scanner unit.
  • Reinitialize the scanner unit.
  • Clean the ADF optical path.
  • Clean the white reference plate.

Answer : Clean the ADF optical path.

CompTIA JK0-015 E2C Security+ Certification Practice Test Set 16

Which of the following sections of a multimeter measures current?


Options are :

  • AC volt meter
  • DC volt meter
  • Ammeter
  • Ohm meter

Answer : Ammeter

Which of the following can affect a persons perception of color?


Options are :

  • Ambient lighting
  • Temperature setting
  • Humidity levels
  • Gamut mapping
  • Paper brightness

Answer : Ambient lighting Paper brightness

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions