CompTIA PD1-001 PDI+ Beta Certification Practice Exam Set 17

Which of the following are typical symptoms of a printer when using card stock that is heavier than specified?


Options are :

  • Media feed rollers wear out early
  • Media will not transfer the latent image
  • Media will be picked up in multiple sheets and jam the printer
  • Media will melt on the fuser and jam the machine
  • Media will not initially feed/pick up from the media tray

Answer : Media feed rollers wear out early Media will not initially feed/pick up from the media tray

When entering a customers location which has a receptionist, the FIRST step a technician should take is:


Options are :

  • go to the end user.
  • use appropriate introduction.
  • proceed to the device to start troubleshooting.
  • ask where the problem device is.

Answer : use appropriate introduction.

Which of the following is MOST likely a D-shaped, plastic part mounted on a drive shaft?


Options are :

  • Bearing
  • Bushing
  • Cam
  • Gear

Answer : Cam

TWAIN compliant scanning devices also require which of the fol owing in order to enable communication to a workstation?


Options are :

  • An image editing application
  • An Ethernet network connection
  • A static IP address
  • A device specific driver

Answer : A device specific driver

Special care must be taken when handling fuser assemblies because they:


Options are :

  • are statically charged.
  • produce ozone.
  • can cause burns.
  • are sensitive to light.

Answer : can cause burns.

CompTIA CA1-001 Advanced Security Practitioner Practice Exam Set 3

Which of the following is the correct order of the steps, from beginning to end, for the general troubleshooting methodology?


Options are :

  • Establish cause theory; test theory; observation; implement solution
  • Observation; establish cause theory; test theory; implement solution
  • Establish cause theory; test theory; implement solution; observation
  • Test theory; establish cause theory; observation; implement solution

Answer : Observation; establish cause theory; test theory; implement solution

Why should media never be stored in a humid environment?


Options are :

  • It can become sticky and jam up the media feed mechanisms
  • It can get charged and cause sheets to adhere to each other.
  • It can cause print feed issues and undue curve.
  • It can become damp and become flammable.

Answer : It can cause print feed issues and undue curve.

If a customer complains that their multifunction device has white lines on the images, in the lead edge to trail edge direction, when scanning and sending faxes, the technician should FIRST:


Options are :

  • clean the scanning exposure optics.
  • contact the party receiving the faxes.
  • run a test page from the printing unit.
  • reprogram the fax reception baud rate.

Answer : clean the scanning exposure optics.

Which of the following is a safety hazard of a laser emitter?


Options are :

  • Serious skin burns
  • Loss of hearing
  • Electric shock
  • Serious eye damage

Answer : Serious eye damage

Which of the following would be the BEST action to take after technical support has given a recommendation for a service issue?


Options are :

  • Cal a fellow technician and get their opinion.
  • Clarify and confirm the recommendation.
  • Study the service manual to make sure the recommendation is correct.
  • Cal the technical support again for a second opinion.

Answer : Clarify and confirm the recommendation.

Which of the following paper sizes is closest to A4?


Options are :

  • Legal
  • Statement
  • Letter
  • Folio

Answer : Letter

CompTIA JK0-801 A+ Networking & PC Hardware Practice Exam Set 11

Which of the following would be the MOST likely outcome if using an inkjet transparency on a laser printer?


Options are :

  • Poor media feeding would occur.
  • Incorrect color match would occur.
  • Incorrect image registration would occur.
  • The media would melt around the fuser roller.

Answer : The media would melt around the fuser roller.

A customer calls to report that the scan images are taking up too much space on their server. The customer tells the technician they are scanning at 600dpi, in PDF format, and using a TWAIN driver in the ADF mode. Which of the following is the MOST likely cause of the excessive space usage?


Options are :

  • Scan from the glass instead of the ADF
  • The TWAIN driver needs updated
  • Scan resolution size
  • Scan file format

Answer : Scan resolution size

On a four-color, subtractive color printing device, a green test page is printing yellow. Which of the following colors is missing from the test print?


Options are :

  • Black
  • Magenta
  • Red
  • Cyan

Answer : Cyan

During the fusing process, which of the following are used to fix the toner to the media?


Options are :

  • High voltage
  • Carrier beads
  • Heat
  • Pressure
  • Static charges

Answer : Heat Pressure

On a four-color, subtractive color printing device, a red test page is printing yellow. Which of the following colors is missing from the test print?


Options are :

  • Blue
  • Cyan
  • Green
  • Magenta

Answer : Magenta

Which of the following failed components would be responsible for multi-sheet feeding from the paper tray?


Options are :

  • Registration roller
  • Feed roller
  • Hot roller
  • Transport roller

Answer : Feed roller

SY0-401 CompTIA Security+ Certification Practice Exam Set 4

When using a multimeter to test a fuse, which of the fol owing settings should the technician select?


Options are :

  • Continuity
  • Watts
  • AC Volts
  • Amps

Answer : Continuity

A technician is working on a Laser/LED device and removes the photoconductor. The technician then covers it with several sheets of paper. Why?


Options are :

  • Photoconductors are light sensitive and prolonged exposure can make them fail.
  • Photoconductors are light sensitive and prolonged exposure can make them over receptive.
  • Photoconductors are light sensitive and can generate dangerous voltages when exposed to light.
  • Photoconductors are light sensitive and the surface wil blister.

Answer : Photoconductors are light sensitive and prolonged exposure can make them fail.

Toner cartridges should always be disposed of following manufacturers guidelines because toner:


Options are :

  • can cause magnetic interference in other electrical devices.
  • is non-biodegradable and has specific disposal guidelines.
  • is toxic and can cause serious burns on skin.
  • emits toxic gases which will harm users.

Answer : is non-biodegradable and has specific disposal guidelines.

Which of the following devices stores machine settings after the power switch has been turned off?


Options are :

  • CPU
  • Thermistor
  • HVPS
  • NVRAM

Answer : NVRAM

Which of the following devices can be used to detect the temperature of the fuser?


Options are :

  • Photo reflective sensor
  • Solenoid
  • Thermistor
  • Halogen lamp

Answer : Thermistor

A user reports that their device is printing slower than normal. Which of the following would MOST likely resolve the issue?


Options are :

  • Adjust the color balance and registration.
  • Replace the toner cartridges.
  • Verify the media type settings.
  • Install a different driver.

Answer : Verify the media type settings.

CompTIA JK0-017 E2C Project+ Certification Practice Exam Set 6

A device reports jams each time it attempts to print, regardless of the paper source. To resolve the problem, the technician should:


Options are :

  • clean the registration assembly.
  • replace the fuser.
  • inspect the pick-up rollers.
  • identify the area where the problem occurs.

Answer : identify the area where the problem occurs.

A customer needs the MAC address for their device, where is the MOST likely place a technician would get this information from?


Options are :

  • Inside the front cover of the device
  • The serial number plate on the device
  • Sales order
  • Configuration page

Answer : Configuration page

A client has a Laser/LED printer that is feeding media normally but is printing totally blank output. Which of the following could be the cause?


Options are :

  • The laser emitter is being blocked.
  • The photoconductor is being under charged.
  • The photoconductor is being over charged.
  • The laser is not applying the correct charge.

Answer : The laser emitter is being blocked.

Which of the following is the purpose of the CCD in the scanner device?


Options are :

  • To convert light into electrical signals
  • To detect different colors
  • To identify the correct file format
  • To focus the light beam

Answer : To convert light into electrical signals

Printing the driver test page verifies which of the following?


Options are :

  • System color calibration
  • Image quality for copies made using the ADF
  • Functionality of the scan heads
  • Communication between the PC and printing device

Answer : Communication between the PC and printing device

Which of the following components has failed if toner can be rubbed off the media?


Options are :

  • Charge roll
  • Photoconductor
  • Fuser unit
  • Developer unit

Answer : Fuser unit

CA1-001 CompTIA Advanced Security Practitioner Practice Exam Set 3

Which of the following failed components would MOST likely be responsible for the media tray rollers not rotating?


Options are :

  • Paper detect sensor
  • Paper tray guides
  • Registration sensor
  • Feed unit clutch

Answer : Feed unit clutch

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions