CompTIA PD1-001 PDI+ Beta Certification Practice Exam Set 16

Which of the following is needed to connect to an 802.11x network?


Options are :

  • SMTP
  • CAT5
  • RJ-45
  • SSID

Answer : SSID

Where is the latent image formed?


Options are :

  • In the laser unit
  • On the transfer roller
  • On the photoconductor
  • In the charge unit

Answer : On the photoconductor

Which of the following type of connector is on a CAT5 cable?


Options are :

  • RJ-45
  • BNC
  • RJ-11
  • IDE

Answer : RJ-45

SY0-401 CompTIA Security+ Certification Practice Exam Set 1

Which of the following is a technique used for isolating problems?


Options are :

  • Change paper feed tires first
  • Replace the consumables
  • Eliminate non-causes from the scenario
  • Complete a full maintenance

Answer : Eliminate non-causes from the scenario

A fuse is a component that:


Options are :

  • provides ground to the device.
  • switches on DC motors.
  • opens when current exceeds its rating.
  • shields the device from external electrical interference.

Answer : opens when current exceeds its rating.

There is a number commonly listed on MOST packages of paper. Which of the following does this number indicate?


Options are :

  • The maximum print speed the paper can be used for
  • The brightness of the paper
  • The maximum percent of humidity of the paper
  • The speed at which the toner wil be fused with the media

Answer : The brightness of the paper

When printing on transparencies why should a user select the transparency setting on a Laser/LED device?


Options are :

  • Requires a different charge on the photoconductor
  • Requires a different transfer voltage
  • Requires a different print driver
  • Requires a different scan speed

Answer : Requires a different transfer voltage

Which of the following is a best practice for preventative maintenance?


Options are :

  • Perform a maintenance check once a year.
  • Perform preventative maintenance checks monthly.
  • Wait until maintenance is indicated by the machine.
  • Perform a preventative maintenance check during service calls.

Answer : Perform a preventative maintenance check during service calls.

When transporting or moving a device, which of the following steps needs to be observed to ensure personal safety?


Options are :

  • Lift the device properly, by using your legs, not your back.
  • Make sure all loose parts and accessories are secured.
  • Fil all the paper trays to help keep the device from tipping over.
  • Make sure the customer is available to help lift the device.
  • Properly ground the device before moving it.

Answer : Lift the device properly, by using your legs, not your back. Make sure all loose parts and accessories are secured.

BR0-003 CompTIA A+ 2009 Edition Bridge Practice Exam Set 2

A customer places a service call stating they cannot send or receive any faxes. The device is able to make copies though. Which of the following should the technician check?


Options are :

  • The fax line for a dial tone
  • The ADF for proper operation
  • The power source
  • The paper feed system

Answer : The fax line for a dial tone

Fiber optic cables are used to:


Options are :

  • transmit light.
  • test AC voltages.
  • ground.
  • transmit voltages.

Answer : transmit light.

A customer has been having jamming issues and also notices the media is curled excessively. Which of the following is the potential issue?


Options are :

  • Ozone filter needs to be replaced
  • Contaminated registration roller
  • Using recycled media
  • Defective toner cartridge

Answer : Using recycled media

Which of the following creates 24 volts for a device?


Options are :

  • LVPS
  • Driver Board
  • Logic Board
  • HVPS

Answer : LVPS

When scanning a color document all of the following file types can be created EXCEPT:


Options are :

  • .PDF.
  • .EXE.
  • .TIFF.
  • .JPG.

Answer : .EXE.

Which of the following items are important safety issues that a technician should know when disassembling a device?


Options are :

  • Be sure to place paper over the photoconductor.
  • Remove the network lead.
  • Be aware of any sharp edges on the devices frame.
  • Be aware of any moving parts that may become exposed.
  • Remove the power cord from the device.
  • Count how many screws are removed during disassembly.

Answer : Be aware of any sharp edges on the devices frame. Be aware of any moving parts that may become exposed. Remove the power cord from the device.

A client has a Laser/LED printer that is feeding media normally but is printing corrupted images. Which of the following can help to eliminate the print engine as the problem?


Options are :

  • Replace the toner
  • Verify connectivity
  • Replace the fuser
  • Generate a test page

Answer : Generate a test page

When a technicians toner vacuum starts losing suction power, the MOST likely thing a technician should do is:


Options are :

  • order a new toner vacuum.
  • empty the toner vacuum filter into a trash can.
  • replace the toner vacuum filter.
  • remove the toner filter and clean it.

Answer : replace the toner vacuum filter.

LX0-104 CompTIA Linux + Powered by LPI Practice Exam Set 1

In a multifunction device, when either scanning a document to a software application or sending a fax to another location, the resulting document exhibits a black line in the scanning lead edge to trail edge direction. Which of the following should a technician address to resolve this issue?


Options are :

  • Replace the photoconductor on their multifunction device.
  • Clean the scanning exposure optics.
  • Reload the scanning application software.
  • Replace the photoconductor on the other device.

Answer : Clean the scanning exposure optics.

If a particular scanned document exhibits a background, a technician should advise the customer to:


Options are :

  • try a different scanning application program.
  • replace the CCD assembly of the scanner.
  • adjust the scanning exposure level.
  • replace the scanning light source.

Answer : adjust the scanning exposure level.

Which of the following is MOST important when calling technical support to solve an issue with a device?


Options are :

  • Know the general troubleshooting methodology.
  • Know the name of the primary user.
  • Verify the type of network that the device is connected to.
  • Call from the customers site.

Answer : Call from the customers site.

After gathering information in regards to a service issue, the next thing a technician should do is:


Options are :

  • check the parts life counters.
  • establish a theory of possible causes.
  • read the service documentation for possible causes.
  • validate the symptoms of the service issue.

Answer : validate the symptoms of the service issue.

When listening to a customer explain machine symptoms, a technician can practice active listening skills by:


Options are :

  • logging on to a computer while the customer is speaking.
  • repeating back to the customer which symptoms the technician should fix.
  • telling the customer the technical names of each supply item.
  • working on the device as the customer describes the problem.

Answer : repeating back to the customer which symptoms the technician should fix.

At what stage in the Laser/LED printing process is residual toner and charge removed?


Options are :

  • Developing
  • Photoconductor preparation
  • Charging
  • Fusing

Answer : Photoconductor preparation

CompTIA Cloud Essentials CLO-001 Certified Practice Exam Set 6

A customer wants to scan a picture that wil be used in a word processing document, which of the following file format should they use?


Options are :

  • PPD
  • TIFF
  • PS
  • PCL

Answer : TIFF

Which of the following steps in the laser print process involves the use of a cleaning blade or brush?


Options are :

  • Writing
  • Charging
  • Photoconductor preparation
  • Transferring

Answer : Photoconductor preparation

Which of the following failed components would be responsible for media not being properly picked from the tray?


Options are :

  • Registration roller
  • Transport roller
  • Registration sensor
  • Paper feed unit

Answer : Paper feed unit

Which of the following failed components would be MOST likely responsible for the charge unit not being powered?


Options are :

  • HVPS
  • Circuit breaker
  • LVPS
  • Laser unit

Answer : HVPS

Which of the following internal test pages should the technician print to obtain the device settings?


Options are :

  • Event logs
  • Configuration pages
  • Parts life counter page
  • Engine test page

Answer : Configuration pages

Which of the following printer driver settings must be selected to automatically print on both sides of the page?


Options are :

  • Col ation
  • RAW
  • Duplex
  • Scaling

Answer : Duplex

CL0-001 CompTIA Cloud Essentials Practice Test Set 7

Which of the following components could cause a continuous black line to be placed on the media?


Options are :

  • Registration sensor
  • Paper feed sensor
  • Laser unit
  • Hot roller
  • Photoconductor

Answer : Hot roller Photoconductor

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions