CompTIA PD1-001 PDI+ Beta Certification Practice Exam Set 12

Which of the following items allows rotation of a component in a single direction only?


Options are :

  • Unidirectional cam
  • Bushing
  • One way bearing
  • Tension spring

Answer : One way bearing

CompTIA JK0-022 E2C Security+ Threats & Vulnerabilities Exam Set 4

Which of the following failed components would cause continuous white streaks to appear on the paper?


Options are :

  • Hot roller
  • Fuser sensor
  • Transport roller
  • Developer unit

Answer : Developer unit

Which of the following failed components would cause the fuser unit to overheat?


Options are :

  • Bal bearing
  • Thermostat
  • Thermistor
  • Pawls

Answer : Thermistor

Which of the following items is used in conjunction with a sensor to provide a return signal to determine exact amounts of movement?


Options are :

  • Static brush
  • Clutch
  • Encoder wheel
  • Relay

Answer : Encoder wheel

During scanning, which of the following BEST describes what occurs when light is cast on the white area of the original document?


Options are :

  • The black image areas are reflected back to the CCD.
  • The white image is sent to the ADF.
  • The black image is sent to the ADF.
  • The white image areas are reflected back to the CCD.

Answer : The white image areas are reflected back to the CCD.

During scanning, which of the following BEST describes what occurs when light is cast on the black areas of the original document?


Options are :

  • The black image is sent to the ADF.
  • The white image areas are not reflected back to the CCD.
  • The white image is sent to the ADF.
  • The black image areas are not reflected back to the CCD.

Answer : The black image areas are not reflected back to the CCD.

Which of the following components contains the beam detector?


Options are :

  • Laser unit
  • Laser unit
  • Developer unit
  • Fuser unit

Answer : Laser unit

220-902 CompTIA A+ Certification Practice Exam Set 1

Which of the following is the primary reason that photoconductors should not exceed their lifespan?


Options are :

  • Poor print quality can occur.
  • The device wil produce excessive ozone.
  • The device can overheat.
  • Excessive jamming can occur.

Answer : Poor print quality can occur.

Which of the following failed components will cause an accordion jam in the fuser?


Options are :

  • Pawls
  • Ball bearing
  • Halogen lamps
  • Thermistor

Answer : Pawls

Which of the fol owing processes utilizes heat and pressure to permanently embed the toner image into the paper?


Options are :

  • Charging
  • Development
  • Fusing
  • Cleaning

Answer : Fusing

Which of the following tools can be used to measure continuity?


Options are :

  • AC line monitor
  • Logic probe
  • Multimeter
  • Polarity tester

Answer : Multimeter

Which of the following is used to perform scanner calibration to ensure that image quality matches the original?


Options are :

  • White reference plate
  • Exposure lamp
  • Lens
  • CCD

Answer : White reference plate

Which of the following methods are used for moving the scanner carriages in aflatbed scanner?


Options are :

  • Pneumatics
  • Hydraulics
  • Cables
  • Magnetism
  • Belts

Answer : Cables Belts

NEW! CompTIA A+ 2019 Cert. Core 2 (220-1002) Practice Tests Set 6

Which of the following items is used to measure temperature on a hot roller?


Options are :

  • Thermal fuse
  • Thermistor
  • Photo sensor
  • Cleaning roller

Answer : Thermistor

Which of the following is used to feed and scan multiple originals?


Options are :

  • CCD
  • Flatbed scanner
  • Paper tray
  • ADF

Answer : ADF

Which of the following components contain the exposure lamp in the cable drivenflatbed scanner?


Options are :

  • Lens
  • First mirror assembly
  • Second mirror assembly
  • CCD

Answer : First mirror assembly

Which of the following items can be found in a dual component developer unit?


Options are :

  • Magnetic roll
  • Toner supply motor
  • Thermistor
  • Auger
  • Transfer belt

Answer : Magnetic roll Auger

Which of the following components contains the polygon mirror motor?


Options are :

  • Developer unit
  • LED unit
  • Fuser unit
  • Laser unit

Answer : Laser unit

Which of the following conditions would result from toner or paper dust contamination on the laser unit windows?


Options are :

  • Poor image transfer
  • Media jams
  • Fuser unit failure
  • Poor print quality

Answer : Poor print quality

CompTIA SY0-401 Security Certification Practice Exam Set 3

Which of the following conditions would result from a failed clutch?


Options are :

  • Data loss in RAM
  • Fuser unit failure
  • Media jams
  • Inaccurate laser exposure

Answer : Media jams

Which of the fol owing are components where the final image, in the form of visible light, will be sent during scanning?


Options are :

  • ADF
  • MTBF
  • OPC
  • CIS
  • CCD

Answer : CIS CCD

Which of the following failed components would be responsible for random toner streaks appearing on the media?


Options are :

  • LVPS
  • Cleaning blade
  • Fuser lamp
  • Registration clutch

Answer : Cleaning blade

Which of the following items would be used to operate a junction gate?


Options are :

  • Relay
  • Solenoid
  • Thermistor
  • Cable

Answer : Solenoid

Which of the following is the next step after an image is captured by the CCD?


Options are :

  • Filtering
  • Image processing
  • Analog to Digital conversion
  • Color separation

Answer : Analog to Digital conversion

A customer reports that they are unable to print to their device. The technician discovers that no one in the office can print to the device but it is ready and can be pinged. Which of the following should the technician check FIRST?


Options are :

  • Web Interface
  • Driver Version
  • Driver Settings
  • Print Queue

Answer : Print Queue

Which of the following parts would open and close a junction gate in a finishing device?


Options are :

  • Clutch
  • Solenoid
  • Cames
  • Stepper Motor
  • AC/DC Motor

Answer : Clutch Solenoid

A customer wants to search for an email address on the network. Which of the following is the protocol used to find it?


Options are :

  • TCP/IP
  • SMTP
  • POP3
  • LDAP

Answer : LDAP

220-701 A+ Essentials Certification Practice Exam Set 1

Which of the following is used to remove the airborne byproduct caused by the charging of the photoconductor?


Options are :

  • Ozone filter
  • FAN
  • Toner filter
  • Noise filter

Answer : Ozone filter

A technician is troubleshooting a networked printer that is not properly connecting to the network. The technician uses the PING utility from a PC on the same network and it does not reach the printer or the default gateway. Which of the following could be the reason for this problem?


Options are :

  • The network cable on the printer has failed.
  • The NIC on the printer has failed.
  • The print driver is not configured correctly.
  • A switch has failed on the network.

Answer : A switch has failed on the network.

A customer is emailing several color photos with their MFP. The file size soon exceeds the limits placed by the network administrator for outgoing email. Which of the following methods could be used to work around this issue?


Options are :

  • Add additional memory to the MFP.
  • Divide the photos into several smaller emails.
  • Scan them to the hard drive and then send them after the work day.
  • Scan them using MPEG.

Answer : Divide the photos into several smaller emails.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions