CompTIA JK0-801 A+ Laptops Printers and Operational Exam Set 2

Which of the following should a technician check FIRST before upgrading the RAM in a laptop?


Options are :

  • The BIOS manufacturer
  • The speed of the FSB
  • The motherboard specifications
  • The operating system version

Answer : The motherboard specifications

CompTIA N10-004 Network+ Certification Practice Test Set 1

The wireless antenna is typically located inside the laptop?s:


Options are :

  • display bezel.
  • keyboard.
  • bottom bezel.
  • rear panel.

Answer : display bezel.

Which of the following precautions should be followed when replacing RAM in a laptop computer? (Select TWO).


Options are :

  • Remove CD-ROM drive
  • Follow ESD procedures
  • Remove CMOS battery
  • Remove all power
  • Check for liquid contamination

Answer : Follow ESD procedures Remove all power

Which of the following features is used for security in laptops and can be used by BitLocker in Windows 7 to encrypt the hard drive?


Options are :

  • Virtualization extensions
  • TPM
  • CMOS
  • BIOS password

Answer : TPM

CompTIA JK0-017 E2C Project+ Certification Practice Exam Set 2

A technician is trying to install an ExpressCard device for a user. The user?s laptop is confirmed to have one spare slot for ExpressCard devices, however, the card is simply too large to fit into the labeled port. Which of the following is MOST likely the issue?


Options are :

  • The slot is for PCMCIA Type I devices.
  • The slot is for ExpressCard/34 devices.
  • The slot is for ExpressCard/54 devices.
  • The slot is for PCMCIA Type II devices.

Answer : The slot is for ExpressCard/34 devices.

Joe, a user, reports that his laptop display is very faint and hard to read. Which of the following is the MOST likely cause?


Options are :

  • The video card is failing.
  • The backlight has failed.
  • The display screen has been damaged.
  • The inverter is bad.

Answer : The backlight has failed.

A customer asked the technician to upgrade the RAM in a laptop. Upon inspection of the RAM bay, the technician only found one RAM slot, however the laptop is specified to have two. Where would the other memory slot be typically located?


Options are :

  • Second hard drive bay
  • Above the PC card slot
  • Under the keyboard
  • Inside the display bezel

Answer : Under the keyboard

NEW! CompTIA A+ 2019 Cert. Core 2 (220-1002) Practice Tests Set 7

Which of the following peripherals needs to be configured after installation to work correctly?


Options are :

  • Digital camera
  • Speakers
  • Touch screen
  • KVM

Answer : Touch screen

Which of the following devices is necessary to provide power to a laptop LCD screen?


Options are :

  • PCMCIA card
  • Inverter
  • Backlight
  • PCI-E card

Answer : Inverter

Which of the following types of memory is used with laptops?


Options are :

  • ECC
  • SDRAM
  • RAMBUS
  • SODIMM

Answer : SODIMM

CompTIA Network+ 6 Certification Practice Exams - 2019 Set 9

A technician is preparing to install a new wireless printer for use in an environment with several wireless networks installed. Which will be used to determine the wireless network that the printer will be available from?


Options are :

  • VPN
  • WPA
  • SSID
  • DNS

Answer : SSID

CompTIA Security+ Cert. (SY0-501): Practice Tests 2019 Set 4

Which of the following should be performed when a printer displays “Printer Maintenance Required”?


Options are :

  • Call the manufacturer and schedule time for remote troubleshooting.
  • Inspect, clean, and test the printer.
  • Replace the drum cartridge, fuser, and toner cartridges.
  • Use the manufacturer?s procedure to satisfy the request.

Answer : Use the manufacturer?s procedure to satisfy the request.

A user has a new network printer they want setup in their home. The user wants all their PCs as well as any guests with laptops to be able to print to it. Which of the following connection methods would be the MOST effective for meeting these requirements? (Select TWO).


Options are :

  • 802.11g
  • USB
  • Serial
  • Bluetooth
  • Ethernet

Answer : 802.11g Ethernet

The process of voltage control to limit the volume of liquid delivered is used in:


Options are :

  • impact printers.
  • laser printers.
  • thermal printers.
  • inkjet printers.

Answer : inkjet printers.

CompTIA CySA+ Set 2

Which of the following cable types is LEAST affected in areas of high EMI?


Options are :

  • UTP
  • Fiber
  • STP
  • Coax

Answer : Fiber

A technician needs to replace a PCI card on a desktop safely. Which of the following would be required prior to touching any of the computer parts within the desktop?


Options are :

  • ESD strap
  • Grounding wires
  • Cable management straps
  • Waterproof mat

Answer : ESD strap

A technician is diagnosing a laser printer that is consistently having issues picking up paper from the first tray. Which of the following items would the technician replace FIRST?


Options are :

  • Toner
  • Transfer belt
  • Rollers
  • Imaging drum

Answer : Rollers

CompTIA LX0-102 Linux Part 2 Certification Practice Exam Set 1

A user has a parallel printer and wants to share it on the company network. Which of the following devices would the user need?


Options are :

  • A wireless router
  • A port replicator
  • A splitter
  • A print server

Answer : A print server

A technician realizes the problem Ann, a customer, is having before she is done explaining all the symptoms. Which of the following is the BEST action for the technician to take?


Options are :

  • Finish listening to Ann?s explanation without interrupting if it will not take an excessive amount of time.
  • Ask Ann to repeat the problem and all the symptoms several times in order for the technician to verify all the facts.
  • Politely tell Ann that the technician knows the proper solution and that no further explanation is necessary.
  • Continue listening to Ann?s explanation until she is finished then refer her to a website so she can find the proper resolution.

Answer : Finish listening to Ann?s explanation without interrupting if it will not take an excessive amount of time.

A technician is installing a new Windows network printer. Upon completion, the network settings are printed and stored under the printer. How can the technician make sure the printer retains the same network settings permanently? (Select TWO).


Options are :

  • Configure a DHCP scope for the subnet that the printer is on.
  • Update the printer in the WINS database.
  • Configure the printer to use a DHCP relay.
  • Ask an administrator to create a DHCP reservation for the printer.
  • Set the printer to use static information.
  • Ask an administrator to create a new DNS name record for the printer

Answer : Ask an administrator to create a DHCP reservation for the printer. Set the printer to use static information.

CompTIA Security+ SY0-501 Exam Preparation (Latest Version) Set 4

A technician has installed a serial printer on a PC in the shipping department. The printer self test ran without error. The user states that printed documents include many wrong characters. Which of the following should be performed to correct this problem?


Options are :

  • Replace the printer cable and reset the printer to factory defaults.
  • Change the printer communication speed to the port setting speed.
  • Replace the printer I/O logic and run the printer self test again.
  • Change the Parity to eight bit even and one stop bit.

Answer : Change the printer communication speed to the port setting speed.

Which of the following would BEST protect equipment from power spikes?


Options are :

  • Surge suppressor
  • HVAC system
  • Power strip
  • Anti-static mat

Answer : Surge suppressor

A technician notices an impact printer has run out of ink. Which of the following should the technician do NEXT?


Options are :

  • Power cycle the printer
  • Replace the ribbon
  • Rewind the ribbon
  • Replace the print head

Answer : Replace the ribbon

JK0-015 CompTIA E2C Security+ 2008 Edition Practice Exam Set 6

A user states that when printing to a shared printer nothing happens and the user has verified that the printer is turned on. Which of the following is the MOST likely cause?


Options are :

  • The user?s print drivers are corrupted.
  • The printer is low on toner.
  • The print server does not have network connectivity.
  • The ISP service is currently not available.

Answer : The print server does not have network connectivity.

A technician wants to install a printer to use port LPT1, but the computer does not currently have such a port. Which of the following expansion cards should the technician install and configure to create an LPT1 port?


Options are :

  • Audio
  • Video
  • Parallel
  • Serial

Answer : Parallel

Which of the following is MOST likely needed when installing a new POS thermal printer?


Options are :

  • Drivers
  • RG-58
  • Operating system disk
  • RJ-11

Answer : Drivers

FC0-U51 CompTIA IT Fundamentals Certification Exam Set 5

Ann, a user, has moved the orientation of her desk and now has to arrange the power and network cables, which are unable to be run along the baseboard. Which of the following would be the safest and most practical approach?


Options are :

  • Secure with ISO compliant duct tape.
  • Purchase a small throw rug.
  • Use a rubberized floor cord cover.
  • Install a raised floor system.

Answer : Use a rubberized floor cord cover.

A technician has configured a network print queue for a printer that was just installed. Which of the following ports would the technician use to add the printer to the local workstation?


Options are :

  • TCP/IP
  • USB
  • LPT
  • COM

Answer : TCP/IP

Which of the following is the MAIN purpose of cleaning the printer during the imaging process?


Options are :

  • It increases the speed of the print process
  • It prolongs the toner cartridge?s lifecycle
  • It keeps the printer clean and prolongs its usable life
  • It takes off any residual toner left after development

Answer : It takes off any residual toner left after development

JK0-802 CompTIA A+ Certification Exam Set 8

A customer has asked a technician to install a new USB printer that is supported by Windows 7. The PC is running Windows 7 Professional. Which of the following is the correct method to complete the installation?


Options are :

  • Connect the new USB printer and power it on. Windows 7 will automatically detect and add the new printer.
  • Add the printer driver to the %SystemDir%\System32\Drivers folder, then connect and power on the printer.
  • Configure the BIOS to boot from USB devices first. Connect and power on the printer. Boot the computer.
  • Add the printer driver to the %SystemDir%\System32\Drivers folder, then connect and power on the printer.

Answer : Connect the new USB printer and power it on. Windows 7 will automatically detect and add the new printer.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions