CompTIA JK0-801 A+ Certification Practical Exam Set 8

A technician, Joe, is working on a small form factor PC and needs to install an additional NIC card. Upon closer inspection, Joe notices that he cannot close the case with the new NIC installed. Which of the following cards does Joe need to complete the installation?


Options are :

  • Storage card
  • FireWire card
  • Riser card
  • Parallel card

Answer : Riser card

A small computer repair office has carpeted flooring. Which of the following accessories would BEST prevent against random electrical static damage?


Options are :

  • ESD mats
  • Grounded 3 prong AC wall sockets
  • Surge suppressors
  • ESD wristbands

Answer : ESD mats

RAID 5 requires a minimum of how many hard drives?


Options are :

  • 2
  • 4
  • 1
  • 3

Answer : 3

CV0-001 CompTIA Cloud+ Certification Practice Exam Set 4

Which of the following is the MOST common connection type for external CD-ROM drives?


Options are :

  • FireWire
  • Ethernet
  • USB
  • eSata

Answer : USB

Which of the following devices requires 3.3V of power from the motherboard?


Options are :

  • USB Port
  • Serial Port Card
  • SLI Video Card
  • DVD-ROM Drive

Answer : Serial Port Card

A customer reports that when they try to boot their desktop computer and have their MP3 player attached, it fails to boot. When the MP3 player is not attached, the computer boots properly. Which of the following will correct this issue and allow the computer to boot with or without the MP3 player attached?


Options are :

  • Move Optical drives up in the boot order
  • Disable USB hard drives in the boot options
  • Disable legacy USB support
  • Enable Network in the boot options

Answer : Disable USB hard drives in the boot options

JK0-015 CompTIA E2C Security+ 2008 Edition Practice Exam Set 9

A user reports that a thermal printer is leaving the same part of every printed label blank. Which of the following steps should the technician perform FIRST?


Options are :

  • Clean the element
  • Check the printer drivers
  • Replace the labels
  • Replace the printer

Answer : Clean the element

Which of the following 802.11 standards has a MAXIMUM bandwidth throughput of 54Mbps and uses 2.4GHz frequency?


Options are :

  • N
  • B
  • G
  • A

Answer : G

When installing a laptop at a desk that will be using stationary dual monitors, which of the following ports should be used? (Select TWO).


Options are :

  • HDMI
  • ExpressPort
  • PCMCIA
  • VGA
  • IEEE 1394
  • PCIe

Answer : HDMI VGA

JK0-019 CompTIA E2C Network + Certification Exam Set 6

A brand new datacenter has been wired with all CAT6a wiring. A technician has been tasked to immediately install and boot up an already configured mission critical file server. Prior to turning the server on, the technician realizes that they had brought CAT5e patch cords by mistake. Which of the following should the technician do?


Options are :

  • Inform the customer and recommend temporarily using the CAT5e cable.
  • Install the CAT5e cable, boot the server and then return and replace it later.
  • Inform the customer that the server will be available as soon as a CAT6a cable is acquired.
  • Install the CAT5e cable, document the installation and leave the premises.

Answer : Inform the customer and recommend temporarily using the CAT5e cable.

Which of the following devices is used to convert initially audible signals into digital signals to provide communication between two endpoints?


Options are :

  • Bridge
  • Repeater
  • Fax machine
  • Modem

Answer : Modem

A customer wants to be able to archive a large 15 to 20 GB project to optical media using a single disk. Which of the following should a technician recommend?


Options are :

  • Blu-Ray writer
  • DVD-RW drive
  • CD-ROM burner
  • Dual Layer DVD burner

Answer : Blu-Ray writer

CompTIA JK0-801 A+ Certification Part – 2 Practice Exam Set 1

A technician is troubleshooting a desktop system that is shutting down randomly after short time periods. After accessing the system BIOS, the technician checks various data from the motherboard sensors. Which of the following would indicate an issue with the system?


Options are :

  • CPU fan RPM value is 0
  • The hard drive temperature is 30° Celsius
  • The number of physical processors value is 1
  • Power supply is providing +12v and +5v

Answer : CPU fan RPM value is 0

Which of the following translates digital signals into analog for transmission over phone lines?


Options are :

  • Bridge
  • Modem
  • SAN
  • VoIP

Answer : Modem

A laptop user has asked a technician to purchase a device that allows for central connection of multiple external devices. The user is cost-sensitive, so they would like a device that does not provide power to the laptop during usage. Which of the following items would BEST fit the user’s needs?


Options are :

  • Port Replicator
  • Parallel Port Selector
  • Ethernet Hub
  • Docking Station

Answer : Port Replicator

CompTIA Cloud+ Certification Test Set 2

A technician has been asked to install a printer on a Windows 7 machine. Through which of the following Control Panel utilities will the technician install the printer?


Options are :

  • Printers and Devices
  • Printers and Faxes
  • Devices and Printers
  • Printers

Answer : Devices and Printers

A technician is trying to install a full-size PCI card into a slim line desktop PC. Which of the following would MOST likely be required to facilitate installation?


Options are :

  • Riser card
  • CNR card
  • RAID card
  • MCA card

Answer : Riser card

Older laptops that did not use LEDs used which of the following to power the backlight lamp?


Options are :

  • Cathode
  • Solenoid
  • Inverter
  • Plasma

Answer : Inverter

LX0-104 CompTIA Linux + Powered by LPI Practice Exam Set 2

Which of the following should the technician configure on a WAP to conceal the data being sent by the wireless clients?


Options are :

  • Enable WEP
  • Decrease the AP transmit power
  • Enable MAC filtering
  • Disable SSID broadcast

Answer : Enable WEP

Which of the following are steps to take before replacing or updating the memory in a laptop? (Select TWO).


Options are :

  • Separate the screen from the base
  • Unplug the AC power adapter
  • Remove the keyboard and touchpad
  • Remove all of the screws from the bottom of the case
  • Remove the battery

Answer : Unplug the AC power adapter Remove the battery

Which of the following is the maximum throughput of a USB 3.0 connection?


Options are :

  • 10 Gbps
  • 800 Mbps
  • 3 Gbps
  • 4.8 Gbps

Answer : 4.8 Gbps

CompTIA JK0-018 Security+ E2C Certified Practice Exam Set 2

ESD mats are useful for protecting against which of the following hazards?


Options are :

  • Electromagnetic interference
  • Static buildup
  • RF interference
  • Chemical burns

Answer : Static buildup

A technician has been tasked with designing a new printing solution for a small team. They want to be able to use a central printer from their shared workspace as well as the conference room next door. Which of the following connection methods would BEST suit their need?


Options are :

  • USB
  • Wireless
  • Infrared (IR)
  • Bluetooth

Answer : Wireless

A user has lost connection to the Internet, but can still browse locally shared folders. Which of the following connections is MOST likely down?


Options are :

  • SAN
  • PAN
  • LAN
  • WAN

Answer : WAN

SY0-401 CompTIA Security+ Certification Practice Exam Set 10

When referring to laser printing, which of the following describes the development process?


Options are :

  • Toner is pulled from the drum to the paper.
  • The corona wire places a static charge on the drum.
  • The toner is permanently affixed to the paper.
  • Toner is pulled to the charged areas of the drum.

Answer : Toner is pulled to the charged areas of the drum.

Which of the following devices uses a list of MAC addresses to direct packets to the appropriate interface?


Options are :

  • Bridge
  • Router
  • Switch
  • Hub

Answer : Switch

Which of the following helps law enforcement show accountability for evidence as it was gathered?


Options are :

  • Court subpoena
  • Drive hashing
  • Drive image creation
  • Chain of custody

Answer : Chain of custody

220-801 CompTIA A+ Certification Practice Exam Set 2

When installing a floppy drive data cable, it is important for a technician to ensure which of the following? (Select TWO).


Options are :

  • Proper orientation of the data cable
  • Availability of compatible power connectors
  • Correct CPU clock speeds
  • Adequate hard drive capacity
  • Correct Master/Slave jumper settings

Answer : Proper orientation of the data cable Availability of compatible power connectors

A system board has six slots for memory chips, aligned in two banks. Which of the following is the optimal memory configuration this board supports?


Options are :

  • Dual Channel
  • Triple Channel
  • Single Channel
  • Multi Mode

Answer : Triple Channel

Multicast addresses fall in which of the following classful address ranges?


Options are :

  • Class A
  • Class E
  • Class B
  • Class D
  • Class C

Answer : Class D

JK0-017 CompTIA E2C Project+ Certification Practice Exam Set 14

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions