CompTIA JK0-801 A+ Certification Practical Exam Set 3

Multicast addresses fall in which of the following classful address ranges?


Options are :

  • Class E
  • Class B
  • Class D
  • Class A
  • Class C

Answer : Class D

A user has 6,250 Megabytes worth of pictures they would like to back up. At the very MINIMUM, which of the following could backup these pictures to a single medium?


Options are :

  • DL DVD Burner
  • LTO Drive
  • CD Burner
  • Blu-Ray Burner

Answer : DL DVD Burner

A technician has been asked to install a printer on a Windows 7 machine. Through which of the following Control Panel utilities will the technician install the printer?


Options are :

  • Printers
  • Printers and Devices
  • Printers and Faxes
  • Devices and Printers

Answer : Devices and Printers

CompTIA PD1-001 PDI+ Beta Certification Practice Exam Set 25

A technician, Joe, is working on a small form factor PC and needs to install an additional NIC card. Upon closer inspection, Joe notices that he cannot close the case with the new NIC installed. Which of the following cards does Joe need to complete the installation?


Options are :

  • Parallel card
  • Riser card
  • Storage card
  • FireWire card

Answer : Riser card

A brand new datacenter has been wired with all CAT6a wiring. A technician has been tasked to immediately install and boot up an already configured mission critical file server. Prior to turning the server on, the technician realizes that they had brought CAT5e patch cords by mistake. Which of the following should the technician do?


Options are :

  • Install the CAT5e cable, document the installation and leave the premises.
  • Inform the customer that the server will be available as soon as a CAT6a cable is acquired.
  • Inform the customer and recommend temporarily using the CAT5e cable.
  • Install the CAT5e cable, boot the server and then return and replace it later.

Answer : Inform the customer and recommend temporarily using the CAT5e cable.

When a technician suspects prohibited activity on an organization’s network or computers, which of the following is the FIRST step they should take?


Options are :

  • Erase the contents of the user’s computer and disable their account
  • Notify others so that peers will stop the activity
  • Confront the suspected person with incident details
  • Confirm an actual infraction has taken place

Answer : Confirm an actual infraction has taken place

JK0-015 CompTIA E2C Security+ 2008 Edition Practice Exam Set 7

Which of the following devices requires 3.3V of power from the motherboard?


Options are :

  • SLI Video Card
  • USB Port
  • Serial Port Card
  • DVD-ROM Drive

Answer : Serial Port Card

A technician has been asked to identify the unknown network addresses from a series of printers attached to the network via external hardware printer servers. Which of the following will provide the technician with the necessary information?


Options are :

  • Performing a PING of each device address without the FQDN
  • Performing a device self test print page from each printer
  • Performing a device print page from each print server
  • Performing a device factory reset on each print server

Answer : Performing a device print page from each print server

Older laptops that did not use LEDs used which of the following to power the backlight lamp?


Options are :

  • Inverter
  • Solenoid
  • Plasma
  • Cathode

Answer : Inverter

JK0-015 CompTIA E2C Security+ 2008 Edition Practice Exam Set 12

Joe, a user, needs to connect a MIDI device to his computer, but the PC does not have the appropriate port. Which of the following add-ons would MOST likely have the port the PC needs?


Options are :

  • TV Capture Card
  • Video Card
  • Network Interface Card
  • Sound Card

Answer : Sound Card

A customer reports that when they try to boot their desktop computer and have their MP3 player attached, it fails to boot. When the MP3 player is not attached, the computer boots properly. Which of the following will correct this issue and allow the computer to boot with or without the MP3 player attached?


Options are :

  • Enable Network in the boot options
  • Move Optical drives up in the boot order
  • Disable legacy USB support
  • Disable USB hard drives in the boot options

Answer : Disable USB hard drives in the boot options

Which of the following devices is used to convert initially audible signals into digital signals to provide communication between two endpoints?


Options are :

  • Modem
  • Repeater
  • Fax machine
  • Bridge

Answer : Modem

CompTIA Security+ SY0-501 Exam Preparation (Latest Version) Set 2

Which of the following types of connectors can use a maximum of 8 strands of wires?


Options are :

  • RJ-45
  • RS-232
  • BNC
  • RJ-11

Answer : RJ-45

A technician is trying to install a full-size PCI card into a slim line desktop PC. Which of the following would MOST likely be required to facilitate installation?


Options are :

  • RAID card
  • Riser card
  • MCA card
  • CNR card

Answer : Riser card

Which of the following is a standard AMD processor socket type?


Options are :

  • F
  • LGA
  • 1366
  • 1155

Answer : F

CompTIA Security+ Cert. (SY0-501): Practice Tests 2019 Set 6

A user has lost connection to the Internet, but can still browse locally shared folders. Which of the following connections is MOST likely down?


Options are :

  • PAN
  • LAN
  • SAN
  • WAN

Answer : WAN

A home user wants to configure the wireless AP for gaming. Some games require that dynamic inbound communication be allowed for the game to work properly. Which of the following should the user configure on the AP to ensure games will work properly when dynamic communication is required while maximizing security?


Options are :

  • DMZ host
  • Port triggering
  • NAT
  • WPS

Answer : Port triggering

A technician is preparing to perform a processor upgrade on a critical company server. Which of the following precautions should be taken FIRST before performing such work on a system? (Select TWO).


Options are :

  • Remove all jewelry
  • Put on an anti-static wrist strap
  • Discharge all capacitors inside the PSU
  • Ensure the PSU is plugged into a grounded electrical socket
  • Ensure humidity levels within the room are lowered

Answer : Remove all jewelry Put on an anti-static wrist strap

NEW! CompTIA A+ 2019 Cert. Core 2 (220-1002) Practice Tests Set 12

A technician has been tasked with designing a new printing solution for a small team. They want to be able to use a central printer from their shared workspace as well as the conference room next door. Which of the following connection methods would BEST suit their need?


Options are :

  • Infrared (IR)
  • Bluetooth
  • USB
  • Wireless

Answer : Wireless

Which of the following are steps to take before replacing or updating the memory in a laptop? (Select TWO).


Options are :

  • Remove all of the screws from the bottom of the case
  • Remove the keyboard and touchpad
  • Unplug the AC power adapter
  • Separate the screen from the base
  • Remove the battery

Answer : Unplug the AC power adapter Remove the battery

A technician has been asked to share a laser printer amongst the users in an HR workgroup. The printer will need to be accessed from distances up to 200 feet through no more than one to two, hollow, dry board walls. Which of the following methods should be used?


Options are :

  • 802.11x
  • USB
  • PAN
  • Infrared (IR)

Answer : 802.11x

CompTIA JK0-018 Security+ E2C Certified Practice Exam Set 10

Which of the following translates digital signals into analog for transmission over phone lines?


Options are :

  • Bridge
  • Modem
  • VoIP
  • SAN

Answer : Modem

Which of the following private network types would MOST likely be used for a corporation with 100,000 employees?


Options are :

  • APIPA
  • Class C
  • Class A
  • Class B

Answer : Class A

Which of the following devices uses a list of MAC addresses to direct packets to the appropriate interface?


Options are :

  • Hub
  • Router
  • Bridge
  • Switch

Answer : Switch

220-902 CompTIA A+ Certification Practice Exam Set 6

A user reports that a thermal printer is leaving the same part of every printed label blank. Which of the following steps should the technician perform FIRST?


Options are :

  • Replace the labels
  • Check the printer drivers
  • Clean the element
  • Replace the printer

Answer : Clean the element

Which of the following memory types is MOST commonly found in servers?


Options are :

  • ECC DIMM
  • ECC SODIMM
  • ECC RAMBUS
  • RAMBUS

Answer : ECC DIMM

A technician is troubleshooting a desktop system that is shutting down randomly after short time periods. After accessing the system BIOS, the technician checks various data from the motherboard sensors. Which of the following would indicate an issue with the system?


Options are :

  • The number of physical processors value is 1
  • Power supply is providing +12v and +5v
  • The hard drive temperature is 30° Celsius
  • CPU fan RPM value is 0

Answer : CPU fan RPM value is 0

CompTIA JK0-022 E2C Security+ Network Security Practice Exam Set 4

A system board has six slots for memory chips, aligned in two banks. Which of the following is the optimal memory configuration this board supports?


Options are :

  • Triple Channel
  • Single Channel
  • Multi Mode
  • Dual Channel

Answer : Triple Channel

Which of the following cable types typically transmits the video from an analog security camera back to the CCTV system?


Options are :

  • CAT5e
  • RG-59
  • CAT6
  • STP

Answer : RG-59

Which of the following helps law enforcement show accountability for evidence as it was gathered?


Options are :

  • Court subpoena
  • Drive image creation
  • Chain of custody
  • Drive hashing

Answer : Chain of custody

CompTIA JK0-801 A+ Networking & PC Hardware Practice Exam Set 2

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions