CompTIA JK0-801 A+ Certification Practical Exam Set 1

Which of the following Internet connection types will offer a more consistent upload and download speed?


Options are :

  • Fiber (Correct)
  • DSL
  • Satellite
  • ISDN

Answer : Fiber

SY0-401 CompTIA Security+ Certification Practice Exam Set 9

Which of the following cable types is rated to transmit a MAXIMUM of 10 Mbps?


Options are :

  • CAT5
  • CAT5e
  • CAT3 (Correct)
  • CAT6

Answer : CAT3

Which of the following is the MOST critical component related to removing heat from the CPU?


Options are :

  • Number of fans
  • Liquid cooling
  • Vented case
  • Thermal paste (Correct)

Answer : Thermal paste

Which of the following Internet connection types would be MOST susceptible to interference from weather? (Select TWO).


Options are :

  • Line-of-sight (Correct)
  • Dial-up
  • Satellite (Correct)
  • DSL
  • Cable

Answer : Line-of-sight Satellite

SY0-401 CompTIA Security+ Certification Practice Exam Set 9

A customer had a small electrical fire in one of their older home computers but it was easily put out because there was a box of baking soda in the kitchen. In the future the customer wants to be better prepared. The customer contacts the technician for the right fire extinguisher. Which of the following should be recommended? (Select TWO).


Options are :

  • Class ABC extinguisher (Correct)
  • Bigger box of baking soda
  • Class B extinguisher
  • Class K extinguisher
  • Class C extinguisher (Correct)

Answer : Class ABC extinguisher Class C extinguisher

Which of the following appliances can function as a connection point between network devices as well as provide access to the Internet?


Options are :

  • Switch
  • Hub
  • Bridge
  • Router (Correct)

Answer : Router

A technician has been dispatched to install a maintenance kit in a laser printer. Which of the following components should the technician avoid touching when performing the installation?


Options are :

  • Pickup roller
  • Toner cartridge
  • Fuser housing
  • Transfer roller (Correct)

Answer : Transfer roller

JK0-017 CompTIA E2C Project+ Certification Practice Exam Set 14

Which of the following is the form factor of a standard S-video connector?


Options are :

  • DB-25
  • DB-9
  • DB-15
  • DIN-6 (Correct)

Answer : DIN-6

CAT6 cable has several characteristics that make it more desirable in an assembly line environment. Which of the following describes one of its unique characteristics?


Options are :

  • It is less likely to be influenced by system noise. (Correct)
  • It is more waterproof than other forms of cable.
  • It exceeds the building code requirement for plenum cable.
  • It can transmit analog signals to greater distances.

Answer : It is less likely to be influenced by system noise.

Which of the following is the MAIN difference between LED and OLED displays?


Options are :

  • OLED do not require a voltage differential while LED do.
  • OLED use light emitting polymers while LED do not. (Correct)
  • LED emit light in all directions while OLED do not.
  • LED employ organic materials while OLED do not.

Answer : OLED use light emitting polymers while LED do not.

FC0-U41 CompTIA Strata IT Fundamentals Practice Exam Set 3

Which of the following laptop hardware would be the LEAST likely to be replaced?


Options are :

  • RAM
  • Hard drive
  • Display screen
  • CPU (Correct)

Answer : CPU

Which of the following is TRUE of RAMBUS memory in Pentium 4 era PCs?


Options are :

  • All unused RAMBUS slots need to be filled with CRIMM dummy chips. (Correct)
  • RAMBUS memory provides more throughput and maximum speed than DDR3.
  • RAMBUS slots are backwards compatible with DDR1 memory.
  • RAMBUS chips can be mixed and matched for numerous sizes and speeds in a given system.

Answer : All unused RAMBUS slots need to be filled with CRIMM dummy chips.

A customer needs 4 new systems for their engineering design department. Which of the following options would BEST satisfy the clientís requirements? (Select TWO).


Options are :

  • USB 3.0
  • DVI output (Correct)
  • Workstation (Correct)
  • Thin client
  • Fast Ethernet

Answer : DVI output Workstation

Practice : CompTIA Network+ (N10-007)

Which of the following is a type of Fiber connector?


Options are :

  • ST (Correct)
  • BNC
  • RJ-45
  • F-Connector

Answer : ST

Which of the following network devices broadcasts all data to all users?


Options are :

  • Bridge
  • Router
  • Hub (Correct)
  • Switch

Answer : Hub

Small form factor PCs that utilize full-height PCI and PCI-Express cards need which of the following supplementary items to allow for proper installation?


Options are :

  • Storage cards
  • FireWire cards
  • Network cards
  • Riser cards (Correct)

Answer : Riser cards

CV0-001 CompTIA Cloud+ Certification Practice Exam Set 10

A technician has installed a new motherboard in a workstation, but after hardware tests, the motherboard has failed. Which of the following should the technician do FIRST before replacing the motherboard?


Options are :

  • Install the graphics card.
  • Reseat all power connections.
  • Ground to the case. (Correct)
  • Remove the CMOS battery.

Answer : Ground to the case.

A user reports that the workstation next to them has prohibited material on the screen. Which of the following should the technician do FIRST?


Options are :

  • Power off the workstation
  • Ask the user for their password
  • Unplug the network
  • Identify what files are open (Correct)

Answer : Identify what files are open

Which of the following ports is associated with HTTPS?


Options are :

  • 443 (Correct)
  • 3389
  • 53
  • 80

Answer : 443

SK0-004 CompTIA Server+ Certification Practice Exam Set 7

Upon entering a computer room, a technician is shocked by a static electricity discharge when touching one of the computers. Which of the following environmental controls should be adjusted so that technicians will not be shocked in the future?


Options are :

  • The humidity level must be decreased.
  • The temperature must be increased.
  • The humidity level must be increased. (Correct)
  • The temperature must be decreased.

Answer : The humidity level must be increased.

Which of the following is a clear characteristic of an IPv6 Internet address?


Options are :

  • 64 bit length
  • 32 bit length
  • 128 bit length (Correct)
  • APIPA compatibility

Answer : 128 bit length

Laser printers differ from thermal printers because:


Options are :

  • they use an electro-static field while thermal printers use heating elements to expose the image. (Correct)
  • they use ink while thermal printers use a ribbon to transfer the image on the paper.
  • they use laser while thermal printers use heat to melt the toner on the paper
  • they use heat to expose the image while thermal printers use heat to transfer the image.

Answer : they use an electro-static field while thermal printers use heating elements to expose the image.

N10-006 CompTIA Network+ Certification Practice Test Set 5

Which of the following connectors are typically used to terminate an RG-6 cable? (Select TWO).


Options are :

  • RJ-45
  • BNC (Correct)
  • F (Correct)
  • ST
  • DIN-9

Answer : BNC F

Which of the following levels of RAID is MOST likely to increase performance while NOT offering additional reliability?


Options are :

  • RAID 1
  • RAID 10
  • RAID 5
  • RAID 0 (Correct)

Answer : RAID 0

When building a RAID 10 array, which of the following is the minimum number of drives that have to be installed?


Options are :

  • 3
  • 2
  • 4 (Correct)
  • 5

Answer : 4

CompTIA Security+ Cert. (SY0-501): Practice Tests 2019 Set 4

The security team has implemented new guidelines on how to handle sensitive information stored on workstations based on a past incident involving information found on donated workstations. Which of the following should be completed by technicians before donating the workstations?


Options are :

  • Delete all partitions of the hard drive
  • Delete usersí data before donation
  • Install a new operating system
  • Write the drive with 1ís and 0ís three times (Correct)

Answer : Write the drive with 1ís and 0ís three times

A contractor has removed a wall jack and thrown it away. There is no longer a line number on the network cable. A technician attaches a far end connector and proceeds to several wiring closets to find the patch panel location of the cable. Which of the following tools will the technician need for this job?


Options are :

  • Loopback plug
  • Toner probe (Correct)
  • Cable tester
  • Multimeter

Answer : Toner probe

Which of the following represents fan connector sizes on a motherboard?


Options are :

  • 1-pin and 2-pin
  • 2-pin and 5-pin
  • 2-pin and 3-pin (Correct)
  • 1-pin and 3-pin

Answer : 2-pin and 3-pin

SY0-401 CompTIA Security+ Certification Practice Exam Set 10

The company is considering adding Bluetooth printers to the environment. In Windows 7, how would a technician add a Bluetooth printer?


Options are :

  • Start >Printers and Devices >Add a Printer >Add a Network, Wireless, or Bluetooth printer (Correct)
  • Start >Control Panel >Device Manager > Add a Network, Wireless, or Bluetooth printer
  • Start >Control Panel >Device Manager > Add a Bluetooth printer
  • Start >Printers and Devices >Add a Printer >Add a local printer

Answer : Start >Printers and Devices >Add a Printer >Add a Network, Wireless, or Bluetooth printer

Which of the following is BEST used for fire safety to prevent toxic fumes during a fire?


Options are :

  • PVC cables
  • Multi-mode cables
  • Plenum cables (Correct)
  • Single-mode cable

Answer : Plenum cables

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions