CompTIA JK0-801 A+ Certification Certified Practice Exam Set 3

Viewing the USB printer would print a large number of computers. Which of the following should be used?


Options are :

  • Internet Connection Sharing
  • None
  • USB hub
  • File and Printer Sharing
  • Turn on the printer double-sided

Answer :File and Printer Sharing

Joe would like an Internet connection that is always on, stable, and do not affect the atmospheric conditions. Which of the following types of Internet access would best meet Joeβ € ™ s requirements?


Options are :

  • Satellite
  • Mobile hotspot
  • Dial-up
  • None
  • Cable

Answer :Cable

Ann user brings his laptop and reported that it was no longer charging. In addition, the laptop can no longer stay in power even when turned on. Which of the following hardware components are most likely to be changed?


Options are :

  • wireless network card
  • system fan
  • Hard disk
  • motherboard
  • memory modules

Answer :motherboard

BR0-001 CompTIA Bridge Security+ Certification Practice Exam Set 2

Which of the following enables audio and video connections to the same cable?


Options are :

  • DVI-A
  • eSATA
  • HDMI
  • None
  • parallel

Answer :HDMI

Which of the following is an advantage in an IPv6 network?


Options are :

  • None
  • less security issues
  • Higher speed available
  • Backwards compatible with all operating systems and network devices
  • Virtually an unlimited number of network addresses,

Answer :Virtually an unlimited number of network addresses,

Which has the following connectors offers the ability to transfer both analog and digital signals?


Options are :

  • BNC
  • VGA
  • None
  • USB 3.0
  • DVI-I

Answer :DVI-I

CompTIA PenTest+ Certified for Cybersecurity Professionals Set 2

New user corporate environment, the HR department need to print to a network. This printer uses only the personnel department documents confidential. Which of the following is the quickest way to give the user access to a printer?


Options are :

  • Add a new user group HR.
  • Add a group Each group HR group.
  • None
  • Add a new user to the Everyone group and give the group rights to print to the printer.
  • Add to a group of users Print HR group.

Answer :Add a new user group HR.

Which of the following types of network cable is the longest range?


Options are :

  • CAT6
  • Single-mode fiber
  • Multi-mode fiber
  • CAT5e
  • None

Answer :Single-mode fiber

Ann technician, is to check the computer with an Intel Core 2 Quad processor and notes that the Task Manager reported that the system is 8 cores. He is convinced that this system has only four cores. Which of the following technologies give rise to a conflict?


Options are :

  • None
  • hyperthreading
  • SMART
  • Intel SSE3
  • L2

Answer :hyperthreading

Comptia Linux+ LX0-103 Certification Exam Practice Test Set 7

The technician has replaced the NIC you are using Windows XP Professional and is properly installed device driver. The computer announces the card has a network connection, but the technician can not use the Internet. Which of the following would be a technician to do next stop NIC installation?


Options are :

  • None
  • Changes the computer and the DNS server IP addresses Action Center
  • Specifies the address using APIPA the NIC and the network controlled ipconfig
  • Restart the computer, and configure the necessary network settings in the BIOS
  • Use ipconfig to check the current settings and make changes to the network connections

Answer :Use ipconfig to check the current settings and make changes to the network connections

Maintenance Worker preparing to perform a processor upgrade critical to the company's server. Which of the following precautions must be taken before such a system work? (Choose two).


Options are :

  • Make sure the humidity levels in the room are calculated
  • Remove all jewelry
  • Remove all capacitors inside the PSU
  • Put on an antistatic wrist strap
  • Make sure the PSU is connected to a grounded wall outlet

Answer :Remove all jewelry Put on an antistatic wrist strap

Certification : CompTIA Network+ (N10-007)

Technician, Joe, working on small form factor PC and need to install an additional network card. On closer inspection, Joe discovers that he can not close the case to a new NIC installed. Which of the following cards makes Joe the need to complete the installation?


Options are :

  • Parallel Cards
  • None
  • FireWire card
  • riser card
  • Storage card

Answer :riser card

Multicast addresses belong to which of the following classful address ranges?


Options are :

  • E-Class
  • class A
  • class D
  • class C
  • B-

Answer :class D

When reference is made to laser printing, which of the following describes the development process?


Options are :

  • The toner of the drum pulled the paper.
  • The toner is drawn to the charged areas of the drum.
  • Corona set a static drum.
  • The toner is permanently affixed to the paper.
  • None

Answer :The toner is drawn to the charged areas of the drum.

CompTIA JK0-022 E2C Security+ Compliance & Operational Exam Set 4

The user has to explain the problem they will have a technician. During the explanation for the technician to determine the cause of the problem is. Which of the following should the technician do?


Options are :

  • Wait until the user terminates their explanation and then give advice
  • Skip the remainder of the user's explanation and then give advice
  • Gesture by the user to give the user knows that no more explanation is needed
  • None
  • Interruption to the user so that the user does not need to offer more than needed

Answer :Wait until the user terminates their explanation and then give advice

Which of the following devices requires a 3.3V to power the motherboard?


Options are :

  • DVD drive
  • The serial port card
  • SLI Graphics
  • USB port
  • None

Answer :The serial port card

Laser multi-function device in the office is able to scan documents, but users have reported that when they try to make copies they get an error message. Which of the following troubleshooting steps should the technician try first?


Options are :

  • None
  • Check the amount of dye to see if it is low.
  • Replace any empty ink cartridges VMA.
  • Apply a new preventive maintenance kit.
  • Make sure that the MFD is connected and online.

Answer :Check the amount of dye to see if it is low.

N10-006 CompTIA Network+ Certification Practice Test Set 1

When you install a floppy drive data cable, it is important that the technician to make sure which of the following? (Choose two).


Options are :

  • The right trend data cable
  • Sufficient hard drive capacity
  • Right CPU clock speeds
  • Right Master / Slave jumper settings
  • Suitable power connectors

Answer :The right trend data cable Suitable power connectors

The user is 6250 megabytes worth of photos they would like to back up. The very minimum, which could be the following backup these images in one medium?


Options are :

  • Blu-Ray Burner
  • CD Burner
  • DL DVD Burner
  • None
  • LTO Drive

Answer :DL DVD Burner

What type of what the company most likely to be used following a private network, 100,000 employees?


Options are :

  • None
  • class C
  • APIPA
  • B-
  • class A

Answer :class A

CompTIA JK0-015 E2C Security+ Certification Practice Test Set 25

Which of the following would be a technician to configure WAP encrypt data sent to wireless clients?


Options are :

  • Disable SSID broadcast
  • Reduces the AP transmit power
  • Allows the MAC filter
  • None
  • WEP

Answer :WEP

Which of the following will help law enforcement show solidarity which it has been collected?


Options are :

  • Creating a drive image
  • None
  • chain of custody
  • Court challenge
  • Drive hashing

Answer :chain of custody

Which of the following supports maximum frequency of 100MHz?


Options are :

  • cat6
  • CAT6a
  • None
  • Cat5
  • Cat5e

Answer :Cat5

N10-006 CompTIA Network+ Certification Practice Test Set 5

A technician troubleshoot desktop system shuts down randomly after short periods of time. Following getting the system BIOS, the technician checks the various information sensors on the system board. Which of the following would cause a problem of the system?


Options are :

  • The power supply provides + 12v and + 5v
  • Hard drive temperature is the degree Celsius 30A
  • A number of physical processors and a value of 1
  • CPU fan RPM value is 0
  • None

Answer :CPU fan RPM value is 0

Which of the following devices to use a list of MAC addresses to direct packets to the appropriate interface?


Options are :

  • router
  • Change
  • None
  • pole
  • Bridge

Answer :Change

RAID 5 requires a minimum number of hard drives?


Options are :

  • 1
  • 2
  • None
  • 4
  • 3

Answer :3

220-801 CompTIA A+ Certification Practice Exam Set 6

Which of the following is the maximum performance of the USB 3.0 interface?


Options are :

  • 10 Gbps
  • 3 Gbps
  • 4.8 Gbps
  • None
  • 800 Mbps

Answer :4.8 Gbps

The brand-new data center is a high-speed CAT6a all the wires. The technician has been asked to immediately install and start up already assigned to a critical file server. Before turning to the server, a technician come to realize that they had brought CAT5e cables by mistake. Which of the following should the technician do?


Options are :

  • None
  • Install a CAT5e cable, restart the server and then return and replace it later.
  • Tell the customer and recommend temporarily using CAT5e cable.
  • To inform the client that the server is available as soon as CAT6a cable has been acquired.
  • Install a CAT5e cable, document the installation and leave the premises.

Answer :Tell the customer and recommend temporarily using CAT5e cable.

Which of the following types of connectors can be used for up to 8 threads cables?


Options are :

  • RS-232
  • RJ-11
  • None
  • RJ-45
  • BNC

Answer :RJ-45

CompTIA CySA+ (CS0-001) 5 Practice Certification Exams Set 5

When the technician suspected prohibited activities the organization's network or computers, which of the following is the first step they should take?


Options are :

  • Meet the suspect forthcoming details
  • Confirm the actual infringement has occurred
  • None
  • Delete the contents of the user's computer and delete their account
  • Report to other peers in order to stop the activity

Answer :Confirm the actual infringement has occurred

The technician has been asked to identify unknown network addresses are a series of printers connected to a network via external hardware print server. Which of the following gives the technician the necessary information?


Options are :

  • Carrying out the machine will print the page for each print server
  • Completing the device self-test results from each side of the printer
  • None
  • PING is performed for each device address without FQDN
  • Requirements to restore the factory default settings of the device on each print

Answer :Carrying out the machine will print the page for each print server

The user tells the thermal printer is going to the same part of every printed label base. Which of the following steps should the technician to perform first?


Options are :

  • None
  • Change printer
  • Check the printer drivers
  • Change labels
  • Clean the element

Answer :Clean the element

CompTIA JK0-801 A+ Networking & PC Hardware Practice Exam Set 4

The customer reported that when they try to start their desktop computer and have their MP3 player is connected, it does not start. When the MP3 player is not connected, the computer turns on properly. Which of the following will correct this problem and allow the computer to boot or without the MP3 player is connected?


Options are :

  • The use of legacy USB support
  • Enable Network boot options
  • None
  • Disable USB hard drives boot options
  • Move Optical drives up in the boot order

Answer :Disable USB hard drives boot options

Which of the following is the 802.11 standards a maximum bandwidth throughput of 54Mbps, and uses the 2.4GHz frequency?


Options are :

  • G
  • None
  • A
  • B
  • OF

Answer :G

Older laptops that did not use the LEDs used for which of the following to power the backlight lamp?


Options are :

  • inverter
  • solenoid
  • None
  • plasma
  • Cathode

Answer :inverter

CompTIA SY0-401 Security Certification Practice Exam Set 9

Which of the following can be used as the default gateway to the network 192.168.1.0/24?


Options are :

  • 192.168.0.255
  • 192.168.0.1
  • 192.168.1.10
  • 192.168.1.0
  • None

Answer :192.168.1.10

Which of the following wireless standards operates in the 5 GHz? (Choose two).


Options are :

  • 802.11a
  • 802.11b
  • 802.11bg
  • 802.11n
  • 802.11g

Answer :802.11a 802.11n

When installed in front of a laptop, which is used in place of two monitors which of the following ports should be used? (Choose two).


Options are :

  • The IEEE 1394
  • ExpressPort
  • VGA
  • PCMCIA
  • PCIe
  • HDMI

Answer :VGA HDMI

220-702 CompTIA A+ Practical Application Practice Exam Set 9

The user has lost the connection to the Internet, but can still browse shared folders locally. Which of the following connections is likely to be down?


Options are :

  • Wireless LAN
  • WAN
  • SAN
  • None
  • PAN

Answer :WAN

Which of the following is the most common method of connecting external CD-ROM drives?


Options are :

  • None
  • FireWire
  • USB
  • Ethernet
  • eSata

Answer :USB

Notebook PC user has asked the technician to buy a device that allows the central connection member of several external devices. The user is cost-sensitive, so they would prefer a device that does not provide power to the portable during operation. Which of the following items to best suit userβ € ™ s needs?


Options are :

  • Port Replicator
  • Dock
  • None
  • Ethernet Hub
  • parallel selector

Answer :Port Replicator

FC0-U41 CompTIA Strata IT Fundamentals Practice Exam Set 7

Which of the following is most likely to be affected by the network topologies other downstream equipment if a problem occurs?


Options are :

  • None
  • bus
  • Ring
  • Star
  • network

Answer :bus

The technician has been asked to share a laser printer among users of HR working group. The printer is accessible through a distance of 200 feet by more than one to two hollow, dry vessel walls. Which of the following methods should be used?


Options are :

  • 802.11x
  • USB
  • PAN
  • None
  • Infrared (IR)

Answer :802.11x

Home user wants to configure your wireless AP to gamble. Some games require that dynamic inbound communication allowed the game to work properly. Which of the following would be the user to set the AP to ensure the games work properly when dynamic communication is needed and maximize safety?


Options are :

  • Port triggering
  • NAT
  • WPS
  • None
  • DMZ

Answer :Port triggering

CompTIA JK0-015 E2C Security+ Certification Practice Test Set 15

Which of the following types of connectors are used with a VGA cable?


Options are :

  • DE-15
  • RCA
  • DVI-A
  • None
  • BNC

Answer :DE-15

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions