CompTIA 220-801 A+ Advanced Certification Practice Exam Set 7

Which of the following is enabled in the BIOS that will prompt a user, Joe, to enter his password every time the laptop performs a POST?


Options are :

  • Power User access
  • Power on password
  • User profile access
  • Administrative password

Answer : Power on password

Which of the following parts of a laptop screen provides illumination for the LCD?


Options are :

  • Inverter
  • Bezel
  • Inverter connector cable
  • Backlight

Answer : Backlight

Which of the following would MOST likely be found on a docking station versus a port replicator?


Options are :

  • VGA Port
  • DVD-ROM
  • PS/2 Slot
  • USB Hub

Answer : DVD-ROM

CompTIA MB0-001 Mobility+ Certification Practice Exam Set 7

Which of the following is an example of an APIPA address?


Options are :

  • 169.254.44.157
  • 4.2.2.2
  • 192.168.32.59
  • 10.23.145 90

Answer : 169.254.44.157

Which of the following would be an example of prohibited content?


Options are :

  • Malicious cookie
  • Detected virus
  • Third party proxy sites
  • Unwanted pop-up

Answer : Unwanted pop-up

Which of the following is used to detect and correct a single bit error in a memory DIMM?


Options are :

  • ECC
  • 8b10b encode/decode
  • Parity
  • RIMM

Answer : ECC

FC0-U51 CompTIA IT Fundamentals Certification Exam Set 4

Which of the following memory types has 184 pins?


Options are :

  • DDR3
  • SDRAM
  • DDR
  • DDR2

Answer : DDR

Which of the following devices uses both light and a lens to facilitate data warehousing?


Options are :

  • Camera
  • Digitizer
  • Barcode reader
  • Touch screen

Answer : Barcode reader

Which of the following BEST describes the purpose of a TV tuner card?


Options are :

  • Convert the user's Internet service into a television signal
  • Decrease the interference associated with the incoming signal
  • Increase the reception of nearby televisions
  • Decode NTSC or PAL signals for the PC

Answer : Decode NTSC or PAL signals for the PC

CompTIA SY0-401 Security Certification Practice Exam Set 3

Which of the following would be a necessary step in performing preventive maintenance on a thermal printer?


Options are :

  • Apply the maintenance kit
  • Replace the print head
  • Clean the heating element
  • Replace the toner

Answer : Clean the heating element

Which of the following printing technologies uses piezoelectric pressure pads to produce small bubbles that are moved to the paper?


Options are :

  • Laser
  • Inkjet
  • Thermal
  • Impact

Answer : Inkjet

Which of the following is used to provide secure file storage to network users only?


Options are :

  • SAN
  • SSH
  • IMAP
  • NAS

Answer : NAS

220-702 CompTIA A+ Practical Application Practice Exam Set 5

An upset customer, Anne, calls in to a repair center to report that her new computer is not working. Anne berates the technician and insists someone repair her computer as soon as possible. The technician should do which of the following? (Select TWO).


Options are :

  • Recommend wine use another repair center
  • Place Anne on hold to allow her to calm down
  • Maintain a positive attitude
  • Follow up with Anne at a later date to verify satisfaction
  • Listen and do not interrupt the customer
  • Offer different repair options if possible

Answer : Maintain a positive attitude Offer different repair options if possible

A technician installed a new docking station for a user and they have lost the ability to connect to the network. Which of the following is the MOST likely reason?


Options are :

  • The product is not compatible
  • Device drivers are not loaded
  • DHCP is disabled
  • . The network is down

Answer : Device drivers are not loaded

Which of the following cables is prone to electromagnetic interference?


Options are :

  • PVC
  • STP
  • UTP
  • Plenum

Answer : UTP

Practice Test : CompTIA A+ Certification 220-902

Which of the following protocols would an email client use?


Options are :

  • HTTP
  • POP3
  • SNMP
  • SFTP

Answer : POP3

A technician completing a server room build out encounters a bundle of unterminated network cables that are not labeled. Which of the following tools would be the BEST to determine which devices the cables are run to?


Options are :

  • Multimeter
  • Cable tester
  • Toner probe
  • Loopbackplug

Answer : Toner probe

A laptop's wireless card shows up in the Device Manager, but the signal strength is always one bar. This is caused by which of the following?


Options are :

  • Disconnected or broken inverter
  • The wireless switch is turned off
  • Disconnected or broken antenna
  • The signal is disabled in the wireless utility

Answer : Disconnected or broken antenna

CompTIA JK0-015 E2C Security+ Certification Practice Test Set 24

When installing a wide SCSI controller in a computer, which ID number should be configured on the controller to give it the highest priority in the chain?


Options are :

  • 15
  • 7
  • 8
  • 0

Answer : 7

Which of the following ISP types requires an RJ-11 connection to the PC?


Options are :

  • Dial-up
  • Cable
  • Cellular
  • WiMAX

Answer : Dial-up

A technician has been asked to install a printer on a Windows XP machine. Through which of the following Control Panel utilities will the technician install the printer?


Options are :

  • Devices and Printers
  • Devices
  • Printers and Devices
  • Printers and Faxes

Answer : Printers and Faxes

SY0-401 CompTIA Security+ Certification Practice Exam Set 6

Which of the following will help protect against brown outs?


Options are :

  • Battery backup
  • Anti-static strap
  • Power supply
  • Surge suppressor

Answer : Battery backup

Which of the following is an APIPA address?


Options are :

  • 192.168.x.x
  • 10.10.x.x
  • 255.x.x.x
  • 169.254.x.x

Answer : 169.254.x.x

Which of the following amounts of memory BEST represents the upper limit of RAM when using a 32-bit architecture?


Options are :

  • 6 GB
  • 2 GB
  • 16 GB
  • 4 GB

Answer : 4 GB

CompTIA JK0-018 Security+ E2C Certification Practice Exam Set 4

Which of the following wireless transmission methods requires line of sight?


Options are :

  • Infrared
  • Bluetooth
  • 802.11a
  • RFID

Answer : Infrared

A technician, Anne, has repaired a CEO's laptop. Which of the following is the LAST step that should be taken after the repair is completed?


Options are :

  • Document all of the services provided
  • Prepare a hot spare in preparation for the next repair
  • Communicate the status of the repair with the CEO
  • Offer other repair options if they are available

Answer : Communicate the status of the repair with the CEO

After having difficulty printing, a user, Joe, informs a technician that the print server needs to be reset because there are a number of documents pending in the printer on the control panel. The technician understands that the real solution is to clear a paper jam. Which of the following is the MOST appropriate response the technician should give Joe?


Options are :

  • Inform Joe that there are print jobs piling up, but the cause is a paper jam, and a technician is fixing the issue now.
  • Remove the paper jam from the printer and offer Joe some reference materials so he can be more helpful in the future.
  • Tell Joe that he was incorrect about the print server, and ask him open-ended questions to see if he has further suggestions.
  • Thank Joe for his help with solving the issue, and let him know that a technician is in the process of resetting the print server.

Answer : Remove the paper jam from the printer and offer Joe some reference materials so he can be more helpful in the future.

CompTIA Security+ Certification (SY0-501): Sample Tests

Which of the following ports is used for POP3 traffic by default?


Options are :

  • 143
  • 443
  • 25
  • 110

Answer : 110

A technician has replaced a bad internal WLAN card in a Windows 7 Professional laptop. The WLAN card is listed in Device Manager as enabled and working. Which of the following should be done NEXT to use the card?


Options are :

  • The SSID of the network must be added to the connection.
  • Change the security passphrase of the network.
  • Configure encryption on the router.
  • The firmware and drivers must be updated to the latest version.

Answer : The SSID of the network must be added to the connection.

A first time PC owner drops off their brand new PC for service, reporting that it is slow and the memory should be 12GB according to the box but only reports 4GB. The RAM voltage was set improperly; one chip needed to be reseated and the BIOS had to be set to use the triple channel architecture. When picking up the PC the customer asks what was wrong. Which of the following would be the MOST appropriate response for this customer?


Options are :

  • Your PC's memory was installed incorrectly. I removed it and put it back in. Additionally the XMP profile needed to be adjusted for TCA.
  • The PC's memory, or RAM, needed to have the correct settings applied to be utilized correctly. It should work fine now.
  • You had the DDR3-1600 set up wrong; you set it for 1.5v and single channel.
  • It was very complicated and technical in nature. If you do not mess with the settings, it should be fine from now on.

Answer : The PC's memory, or RAM, needed to have the correct settings applied to be utilized correctly. It should work fine now.

CompTIA JK0-015 E2C Security+ Certification Practice Test Set 1

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions