CompTIA 220-801 A+ Advanced Certification Practice Exam Set 6

Which of the following would be an example of prohibited content?


Options are :

  • Malicious cookie
  • Unwanted pop-up
  • Third party proxy sites
  • Detected virus

Answer : Unwanted pop-up

CompTIA Network+ 6 Certification Practice Exams - 2019 Set 5

Which of the following is enabled in the BIOS that will prompt a user, Joe, to enter his password every time the laptop performs a POST?


Options are :

  • Administrative password
  • Power User access
  • Power on password
  • User profile access

Answer : Power on password

Which of the following network types uses IrDA for communication?


Options are :

  • PAN
  • LAM
  • WAN
  • MAN

Answer : PAN

Which of the following will help protect against brown outs?


Options are :

  • Power supply
  • Surge suppressor
  • Battery backup
  • Anti-static strap

Answer : Battery backup

CompTIA HT0-201 DHTI+ Certification Practice Exam Set 6

A technician, Anne, has repaired a CEO's laptop. Which of the following is the LAST step that should be taken after the repair is completed?


Options are :

  • Prepare a hot spare in preparation for the next repair
  • Offer other repair options if they are available
  • Communicate the status of the repair with the CEO
  • Document all of the services provided

Answer : Communicate the status of the repair with the CEO

A workstation would MOST likely be connected to an office network using which of the following cable types?


Options are :

  • eSATA
  • Ethernet
  • SCSI
  • Bluetooth

Answer : Ethernet

Which of the following would MOST likely be found on a docking station versus a port replicator?


Options are :

  • USB Hub
  • PS/2 Slot
  • VGA Port
  • DVD-ROM

Answer : DVD-ROM

CompTIA HT0-201 DHTI+ Certification Practice Exam Set 1

A common method of accessing computers remotely that uses port 23 is known as?


Options are :

  • LDAP
  • FTP
  • RDP
  • Telnet

Answer : Telnet

Which of the following memory types is MOST commonly found in Pentium 4 class and newer desktop PCs?


Options are :

  • SIMM
  • RAMBUS
  • DIMM
  • SODIMM

Answer : RAMBUS

Which of the following is used to provide secure file storage to network users only?


Options are :

  • IMAP
  • SAN
  • SSH
  • NAS

Answer : NAS

JK0-015 CompTIA E2C Security+ 2008 Edition Practice Exam Set 1

Which of the following is used to detect and correct a single bit error in a memory DIMM?


Options are :

  • ECC
  • RIMM
  • 8b10b encode/decode
  • Parity

Answer : ECC

Which of the following printing technologies uses piezoelectric pressure pads to produce small bubbles that are moved to the paper?


Options are :

  • Impact
  • Thermal
  • Laser
  • Inkjet

Answer : Inkjet

Which of the following cards would utilize a 4G signal to provide Internet access?


Options are :

  • Wi-Fi cards
  • Sound cards
  • USB cards
  • Cellular cards

Answer : Cellular cards

CompTIA PenTest+ Certified for Cybersecurity Professionals Set 1

Which of the following protocols would an email client use?


Options are :

  • SFTP
  • HTTP
  • SNMP
  • POP3

Answer : POP3

A technician is not able to boot to Windows OS. A "Non-bootable device found" message appears on the screen when the computer restarts. Which of the following is the MOST possible cause of the error message?


Options are :

  • The operating system is corrupt.
  • A bootable HDD is not recognized in the BIOS.
  • MBR is corrupt on the HDD.
  • HDD is set to Cable Select.

Answer : A bootable HDD is not recognized in the BIOS.

Which of the following safety devices would be employed to prevent static discharge between a computer and a technician?


Options are :

  • Non-Magnetic screwdriver
  • Electrical tape
  • ESD mat
  • Voltmeter

Answer : ESD mat

CompTIA CAS-002 Advanced Security Practitioner Certify Exam Set 5

Which of the following devices uses both light and a lens to facilitate data warehousing?


Options are :

  • Touch screen
  • Digitizer
  • Barcode reader
  • Camera

Answer : Barcode reader

Which of the following parts of a laptop screen provides illumination for the LCD?


Options are :

  • Inverter
  • Inverter connector cable
  • Bezel
  • Backlight

Answer : Backlight

A technician is tasked with selecting components to build a computer that will be used for computer aided drafting and computer aided modeling


Options are :

  • MIDI sound card
  • Triple channel memory
  • Socket 1366 CPU
  • TV tuner
  • Onboard graphics

Answer : Triple channel memory Socket 1366 CPU

CompTIA JK0-801 A+ Networking & PC Hardware Practice Exam Set 5

When a user's computer boots, a message shows that reads; "Alert! Cover previously removed." Which of the following was configured in the BIOS to cause this alert?


Options are :

  • Boot sequence
  • Intrusion detection
  • Date/time clock settings
  • Virtualization support

Answer : Intrusion detection

A SOHO environment utilizes network hardware address filtering to minimize unauthorized use of its network infrastructure. A technician has been asked to install a shared network printer in the environment. Which of the following MUST the technician know in order to add the printer to the environment?


Options are :

  • Subnet mask of the network
  • MAC address of the printer
  • Firmware version of the printer
  • IP address of the printer

Answer : MAC address of the printer

After having difficulty printing, a user, Joe, informs a technician that the print server needs to be reset because there are a number of documents pending in the printer on the control panel. The technician understands that the real solution is to clear a paper jam. Which of the following is the MOST appropriate response the technician should give Joe?


Options are :

  • Remove the paper jam from the printer and offer Joe some reference materials so he can be more helpful in the future.
  • Inform Joe that there are print jobs piling up, but the cause is a paper jam, and a technician is fixing the issue now.
  • Thank Joe for his help with solving the issue, and let him know that a technician is in the process of resetting the print server.
  • Tell Joe that he was incorrect about the print server, and ask him open-ended questions to see if he has further suggestions.

Answer : Remove the paper jam from the printer and offer Joe some reference materials so he can be more helpful in the future.

Comptia Linux+ LX0-103 Certification Exam Practice Test Set 7

When installing a wide SCSI controller in a computer, which ID number should be configured on the controller to give it the highest priority in the chain?


Options are :

  • 0
  • 7
  • 8
  • 15

Answer : 7

An upset customer, Anne, calls in to a repair center to report that her new computer is not working. Anne berates the technician and insists someone repair her computer as soon as possible. The technician should do which of the following? (Select TWO).


Options are :

  • Listen and do not interrupt the customer
  • Offer different repair options if possible
  • Follow up with Anne at a later date to verify satisfaction
  • Maintain a positive attitude
  • Place Anne on hold to allow her to calm down
  • Recommend wine use another repair center

Answer : Offer different repair options if possible Maintain a positive attitude

A customer has purchased a 1TB internal hard drive. The customer would like to have it installed as a data drive in their existing system. The technician discovers there is no spare power supply connector for the new hard drive. Which of the following would enable the technician to EASILY accomplish the task? (Select TWO).


Options are :

  • Replace the existing hard drive.
  • Remove the floppy disk.
  • Replace the power supply
  • Remove the CD-ROM.
  • Split an existing power connection.

Answer : Remove the CD-ROM. Split an existing power connection.

CompTIA JK0-801 A+ Networking & PC Hardware Practice Exam Set 2

Which of the following BEST describes the purpose of a TV tuner card?


Options are :

  • Convert the user's Internet service into a television signal
  • Decode NTSC or PAL signals for the PC
  • Increase the reception of nearby televisions
  • Decrease the interference associated with the incoming signal

Answer : Decode NTSC or PAL signals for the PC

A technician is tasked with selecting components to build a computer that will be used for computer aided drafting and computer aided modeling


Options are :

  • TV tuner
  • Socket 1366 CPU
  • Triple channel memory
  • Onboard graphics
  • MIDI sound card

Answer : Socket 1366 CPU Triple channel memory

Test : CompTIA Cloud+ Certification

Which of the following devices would need to be configured to block specific ports and protocols from entering the network?


Options are :

  • Bridge
  • Port replicator
  • Gateway
  • Firewall

Answer : Firewall

A customer has purchased a 1TB internal hard drive. The customer would like to have it installed as a data drive in their existing system. The technician discovers there is no spare power supply connector for the new hard drive. Which of the following would enable the technician to EASILY accomplish the task? (Select TWO).


Options are :

  • Remove the floppy disk.
  • Replace the existing hard drive.
  • Remove the CD-ROM.
  • Split an existing power connection.
  • Replace the power supply

Answer : Remove the CD-ROM. Split an existing power connection.

During which of the following phases of the imaging process is the latent image exposed to toner?


Options are :

  • Charging
  • Developing
  • Transferring
  • Exposing

Answer : Developing

CompTIA JK0-801 A+ Certification Practical Exam Set 2

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions