CompTIA 220-801 A+ Advanced Certification Practice Exam Set 4

Which of the following Internet connection types usually has access controlled with PPPoE security authentication?


Options are :

  • Cable
  • LTE
  • DSL
  • WiMAX

Answer : DSL

Joe, a user, wants to modify the fan speed settings on his PC. Which of the following locations allows the fan speed settings to be changed?


Options are :

  • Device Manager
  • Device Manager
  • Device Manager
  • BIOS

Answer : BIOS

JK0-017 CompTIA E2C Project+ Certification Practice Exam Set 3

A technician has been asked to identify the unknown network addresses from a series of printers attached to the network via external hardware printer servers. Which of the following will provide the technician with the necessary information?


Options are :

  • Performing a device print page from each print server
  • Performing a device self test print page from each printer
  • Performing a PING of each device address without the FQDN
  • Performing a device factory reset on each print server

Answer : Performing a device print page from each print server

Which of the following types of connectors can use a maximum of 8 strands of wires?


Options are :

  • . RJ-11
  • RJ-45
  • BNC
  • RS-232

Answer : RJ-45

A technician has been asked to share a laser printer amongst the users in an HR workgroup. The printer will need to be accessed from distances up to 200 feet through no more than one to two, hollow, dry board walls. Which of the following methods should be used?


Options are :

  • 802.11x
  • USB
  • . Infrared (IR)
  • PAN

Answer : 802.11x

CompTIA JK0-018 Security+ E2C Certified Practice Exam Set 1

ESD mats are useful for protecting against which of the following hazards?


Options are :

  • Chemical burns
  • Electromagnetic interference
  • RF interference
  • Static buildup

Answer : Static buildup

A technician is asked to repair a broken Ethernet jack in a conference room. Which of the following tools would the technician use when repairing the wall jack?


Options are :

  • Crimper
  • Toner probe
  • Multimeter
  • Toner probe

Answer : Toner probe

A technician needs to attach a network cable to a wall jack in the conference room. After running the cable through the conduit to the conference room, which of the following tools would BEST be used to connect the cable to the wall jack?


Options are :

  • Loopback plug
  • Multimeter
  • Punchdown
  • Crimper

Answer : Punchdown

CT0-101 Convergence+ Certification Practice Exam Set 7

Which of the following is the maximum throughput of a USB 3.0 connection?


Options are :

  • . 4.8 Gbps
  • 3 Gbps
  • 800 Mbps
  • 10 Gbps

Answer : . 4.8 Gbps

A user has 6,250 Megabytes worth of pictures they would like to back up. At the very MINIMUM, which of the following could backup these pictures to a single medium?


Options are :

  • LTO Drive
  • CD Burner
  • Blu-Ray Burner
  • DL DVD Burner

Answer : DL DVD Burner

A customer wants to be able to archive a large 15 to 20 GB project to optical media using a single disk. Which of the following should a technician recommend?


Options are :

  • CD-ROM burner
  • DVD-RW drive
  • Dual Layer DVD burner
  • Blu-Ray writer

Answer : Blu-Ray writer

Certification : CompTIA Network+ (N10-007)

A technician is trying to install a full-size PCI card into a slim line desktop PC. Which of the following would MOST likely be required to facilitate installation?


Options are :

  • MCA card
  • Riser card
  • CNR card
  • RAID card

Answer : Riser card

A technician has been tasked with designing a new printing solution for a small team. They want to be able to use a central printer from their shared workspace as well as the conference room next door. Which of the following connection methods would BEST suit their need?


Options are :

  • USB
  • Infrared (IR)
  • Bluetooth
  • Wireless

Answer : Wireless

A user has purchased a new touch screen tablet and is reporting that the touch interface is extremely inaccurate and almost unusable. Which of the following actions should a technician take FIRST to resolve the issue?


Options are :

  • Give the user a stylus to use
  • Verify touch interface connectivity inside the screen
  • Give the user a stylus to use
  • Return the tablet to the manufacturer

Answer : Give the user a stylus to use

CompTIA JK0-801 A+ Networking & PC Hardware Practice Exam Set 13

A laser multi-function device in an office is able to scan documents, but users are reporting that when they try to make copies they receive an error. Which of the following troubleshooting steps should a technician try FIRST?


Options are :

  • Apply a new preventative maintenance kit.
  • Replace all empty ink cartridges in the MFD.
  • Check the toner level to see if it is low.
  • Ensure the MFD is connected and on the network

Answer : Check the toner level to see if it is low.

Which of the following transmission methods is dependent on line of sight?


Options are :

  • Bluetooth
  • IR
  • RF
  • 802.11

Answer : IR

A technician is preparing to perform a processor upgrade on a critical company server. Which of the following precautions should be taken FIRST before performing such work on a system? (Select TWO).


Options are :

  • Ensure humidity levels within the room are lowered
  • Remove all jewelry
  • Put on an anti-static wrist strap
  • Ensure the PSU is plugged into a grounded electrical socket
  • Discharge all capacitors inside the PSU

Answer : Remove all jewelry Put on an anti-static wrist strap

Mock : CompTIA Cloud+ Certification

Ann, a technician, is sent to a chemical company to troubleshoot their server. She is concerned about what types of chemicals she will be exposed to. Which of the following documents would address Ann’s concerns?


Options are :

  • Incident report
  • Statement of work
  • Statement of work
  • Inventory spreadsheet

Answer : Statement of work

A system board has six slots for memory chips, aligned in two banks. Which of the following is the optimal memory configuration this board supports?


Options are :

  • Multi Mode
  • Triple Channel
  • . Dual Channel
  • Single Channel

Answer : Triple Channel

A technician has replaced the NIC in a computer running Windows XP Professional and has properly installed the device driver. The computer indicates the card has network connectivity, but the technician is unable to access the Internet. Which of the following should the technician do NEXT to finish the NIC installation?


Options are :

  • Change the computer and DNS server’s IP addresses in the Action Center
  • Reboot the computer and configure the necessary network settings in the BIOS
  • Assign the NIC an APIPA address using ipconfig and the network setup wizard
  • . Use ipconfig to check the current settings and Network Connections to make changes

Answer : . Use ipconfig to check the current settings and Network Connections to make changes

FC0-U41 CompTIA Strata IT Fundamentals Practice Exam Set 7

Which of the following is the MAXIMUM number of 10Mb audio files that a user can store on a CD-RW?


Options are :

  • 70
  • 120
  • 50
  • 100

Answer : 70

When a technician suspects prohibited activity on an organization’s network or computers, which of the following is the FIRST step they should take?


Options are :

  • Confirm an actual infraction has taken place
  • Erase the contents of the user’s computer and disable their account
  • Notify others so that peers will stop the activity
  • Confront the suspected person with incident details

Answer : Confirm an actual infraction has taken place

A technician has been asked to install a printer on a Windows 7 machine. Through which of the following Control Panel utilities will the technician install the printer?


Options are :

  • Devices and Printers
  • Printers
  • Printers and Devices
  • Printers and Faxes

Answer : Devices and Printers

SY0-401 CompTIA Security+ Certification Practice Exam Set 2

Which of the following cable types typically transmits the video from an analog security camera back to the CCTV system?


Options are :

  • STP
  • RG-59
  • CAT5e
  • CAT6

Answer : RG-59

A technician needs to install a projector into a conference room with several windows. Which of the following should the technician consider so that the displayed image is always visible?


Options are :

  • Resolution
  • Anti-glare filter
  • Bulb life
  • Lumens

Answer : Lumens

When installing a floppy drive data cable, it is important for a technician to ensure which of the following? (Select TWO).


Options are :

  • Adequate hard drive capacity
  • Proper orientation of the data cable
  • Availability of compatible power connectors
  • Correct Master/Slave jumper settings
  • Correct CPU clock speeds

Answer : Proper orientation of the data cable Availability of compatible power connectors

CompTIA JK0-015 E2C Security+ Certification Practice Test Set 15

Which of the following supports a MAXIMUM frequency of 100MHz?


Options are :

  • Cat6a
  • Cat5
  • Cat5e
  • Cat6

Answer : Cat5

Which of the following 802.11 standards has a MAXIMUM bandwidth throughput of 54Mbps and uses 2.4GHz frequency?


Options are :

  • N
  • A
  • B
  • G

Answer : G

Which of the following laser printer components will flip the paper to allow for printing on both sides?


Options are :

  • Duplex assembly
  • Duplex assembly
  • Paper registration assembly
  • Paper pickup assembly

Answer : Duplex assembly

220-801 CompTIA A+ Certification Practice Exam Set 9

Which of the following laptop components provides direct electrical supply to illuminate the screen’s image?


Options are :

  • Backlight
  • CMOS battery
  • DC jack
  • Inverter

Answer : Inverter

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions