CompTIA 220-801 A+ Advanced Certification Practice Exam Set 3

A small computer repair office has carpeted flooring. Which of the following accessories would BEST prevent against random electrical static damage?


Options are :

  • ESD mats
  • Surge suppressors
  • Grounded 3 prong AC wall sockets
  • ESD wristbands

Answer : ESD mats

Which of the following types of connectors is used on a VGA cable?


Options are :

  • DVI-A
  • DE-15
  • RCA
  • BNC

Answer : DE-15

Which of the following can be used as the default gateway for the 192.168.1.0/24 network?


Options are :

  • 192.168.0.255
  • 192.168.0.1
  • 192.168.1.10
  • 192.168.1.0

Answer : 192.168.1.10

BR0-002 CompTIA Network + Bridge Practice Exam Set 2

A user has lost connection to the Internet, but can still browse locally shared folders. Which of the following connections is MOST likely down?


Options are :

  • LAN
  • WAN
  • SAN
  • PAN

Answer : WAN

A customer reports that when they try to boot their desktop computer and have their MP3 player attached, it fails to boot. When the MP3 player is not attached, the computer boots properly. Which of the following will correct this issue and allow the computer to boot with or without the MP3 player attached?


Options are :

  • Disable legacy USB support
  • Move Optical drives up in the boot order
  • Disable USB hard drives in the boot options
  • Enable Network in the boot options

Answer : Disable USB hard drives in the boot options

A company would like to connect multiple departments into one network operations center (NOC), yet provide each department with autonomy from one another and enable them to share their high speed Internet connection. Which of the following devices would BEST enable the NOC to accomplish this?


Options are :

  • Repeater
  • Hub
  • Bridge
  • Switch

Answer : Switch

220-702 CompTIA A+ Practical Application Practice Exam Set 1

A new server has recently been purchased and needs to have the RAID configured for its four drives. Which of the following RAID levels would be set up to provide the BEST performance and data protection?


Options are :

  • 5
  • 1
  • 4
  • 0

Answer : 5

Joe, a user, needs to connect a MIDI device to his computer, but the PC does not have the appropriate port. Which of the following add-ons would MOST likely have the port the PC needs?


Options are :

  • Sound Card
  • Network Interface Card
  • Video Card
  • TV Capture Card

Answer : Sound Card

Multicast addresses fall in which of the following classful address ranges?


Options are :

  • Class C
  • Class E
  • Class B
  • Class D
  • Class A

Answer : Class D

CompTIA 220-801 A+ Advanced Certification Practice Exam Set 8

Which of the following bus speeds is supported by PC2-5300 and PC2-4200?


Options are :

  • 533Mhz
  • 666Mhz
  • 800Mhz
  • 333Mhz

Answer : 533Mhz

When printing forms that need to be copied using carbon paper, which of the following technologies is BEST suited?


Options are :

  • Impact
  • Laser
  • Thermal
  • Inkjet

Answer : Impact

Which of the following is the MAXIMUM number of unique addresses in a Class C network?


Options are :

  • 64
  • 254
  • 255
  • 128

Answer : 254

CompTIA Network+ 6 Certification Practice Exams - 2019 Set 10

A user reports that when printing to an impact printer that the carbon copies are legible but the top copy is blank. Which of the following is the MOST likely cause?


Options are :

  • Replace the printer data cable
  • Replace the printer head
  • Reinstall the print drivers
  • Replace the ribbon

Answer : Replace the ribbon

Which of the following is correct about differences in CAT5 and CAT6 connectors?


Options are :

  • CAT5 and CAT6 use the same connectors
  • . CAT5 connectors have locking tabs
  • CAT6 connectors are longer for better contact
  • CAT6 supports three different wiring standards

Answer : CAT5 and CAT6 use the same connectors

A laptop user has asked a technician to purchase a device that allows for central connection of multiple external devices. The user is cost-sensitive, so they would like a device that does not provide power to the laptop during usage. Which of the following items would BEST fit the users needs?


Options are :

  • Parallel Port Selector
  • Port Replicator
  • Docking Station
  • . Ethernet Hub

Answer : Port Replicator

JK0-802 CompTIA A+ Certification Exam Set 5

A technician is testing the voltages of connectors on the motherboard. Which of the following connectors would give a reading of 12V?


Options are :

  • Molex
  • IEEE 1394
  • USB
  • SATA

Answer : Molex

RAID 5 requires a minimum of how many hard drives?


Options are :

  • 2
  • 1
  • 4
  • 3

Answer : 4

CT0-101 Convergence+ Certification Practice Exam Set 10

A service call was opened for a thermal printer that has poor print quality. Which of the following should the technician do FIRST?


Options are :

  • Use an industry approved cleaning kit to clean the print rollers.
  • Use the printer manufacturers cleaning kit to clean the print head.
  • Replace the print head with OEM replacement.
  • Use a cotton swab and alcohol to clean the print head.
  • Use the printer manufacturers cleaning kit to clean the print rollers.

Answer : Use the printer manufacturers cleaning kit to clean the print head.

Which of the following devices uses MAC tables to allow multiple computers to access a single network connection?


Options are :

  • VoIP
  • Switch
  • Hub
  • Firewall

Answer : Switch

A technician is connecting an old dot matrix printer to a computer. The printers cable has a non-rectangular connector that connects to a pink port in the back of the computer. This type of connection is MOST likely which of the following?


Options are :

  • Parallel
  • Ethernet
  • USB
  • Bluetooth

Answer : Parallel

CompTIA JK0-015 E2C Security+ Certification Practice Test Set 6

Which of the following translates digital signals into analog for transmission over phone lines?


Options are :

  • SAN
  • Modem
  • Bridge
  • VoIP

Answer : Modem

Which of the following connectors provides the capability to pass both analog and digital signals?


Options are :

  • BNC
  • USB 3.0
  • DVI-I
  • VGA

Answer : DVI-I

Which of the following Internet connection types uses analog transmission? (Select TWO).


Options are :

  • WiMAX
  • Dial-up
  • DSL
  • Satellite
  • IDSN

Answer : Dial-up DSL

CompTIA Cyber Security Analyst (CySA+) Practice Exams 2019 Set 3

When installing a laptop at a desk that will be using stationary dual monitors, which of the following ports should be used? (Select TWO).


Options are :

  • PCIe
  • VGA
  • HDMI
  • ExpressPort
  • PCMCIA

Answer : VGA HDMI

A printer technician is sent to work on a fuser in a laser printer that is not adhering toner properly to the paper. While onsite Joe, an end user, reports that he has been having frequent paper jams as well. Which of the following would be the BEST course of action to repair the printer?


Options are :

  • Install the fuser and also replace the high voltage power supply
  • Install the fuser, replace the toner cartridge, and replace the pickup and separation rollers
  • Install a manufacturer recommended maintenance kit
  • Install the fuser as the paper jams were probably also caused by the defective fuser

Answer : Install a manufacturer recommended maintenance kit

Which of the following network cable types has the longest range?


Options are :

  • Multi-mode fiber
  • CAT6
  • CAT5e
  • Single-mode fiber

Answer : Single-mode fiber

CompTIA JK0-801 A Laptop Printer and Operating certify Exam Set 3

A user with a USB printer would like to print from more than one computer. Which of the following features should be used?


Options are :

  • . Enable printer duplexing
  • File and printer sharing
  • Internet connection sharing
  • USB hub

Answer : File and printer sharing

Which of the following cable types has the LONGEST transmission range?


Options are :

  • Single-mode fiber
  • CAT5e
  • Multimode fiber
  • CAT6

Answer : Single-mode fiber

When referring to laser printing, which of the following describes the development process?


Options are :

  • Toner is pulled from the drum to the paper.
  • Toner is pulled to the charged areas of the drum.
  • Toner is pulled from the drum to the paper.
  • The corona wire places a static charge on the drum.

Answer : Toner is pulled to the charged areas of the drum.

220-701 A+ Essentials Certification Practice Exam Set 3

A brand new datacenter has been wired with all CAT6a wiring. A technician has been tasked to immediately install and boot up an already configured mission critical file server. Prior to turning the server on, the technician realizes that they had brought CAT5e patch cords by mistake. Which of the following should the technician do?


Options are :

  • Inform the customer that the server will be available as soon as a CAT6a cable is acquired.
  • Install the CAT5e cable, document the installation and leave the premises.
  • Install the CAT5e cable, boot the server and then return and replace it later
  • Inform the customer and recommend temporarily using the CAT5e cable.

Answer : Inform the customer and recommend temporarily using the CAT5e cable.

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions