Citrix 1Y0-A22 XenApp Advance Administration Practice Exam Set 5

Scenario: A XenApp administrator needs to publish an application that will be streamed to traveling users so they can launch the application when they are NOT connected to the network. The administrator also needs to provide the published application over an ICA connection. The user devices have been equipped with the appropriate plug-ins. Which setting should the administrator choose when publishing the application?


Options are :

  • Streamed if possible, otherwise accessed from a server
  • Installed application
  • Accessed from a server
  • Streamed to client

Answer :Streamed if possible, otherwise accessed from a server

Citrix 1Y0-A22 XenApp Advance Administration Practice Exam Set 6

Scenario: An administrator is setting up access for the User Support team. The administrator wants to give this team access to manage user sessions so that they can disconnect and either clear or log-off user sessions for troubleshooting purposes. Which node would the administrator use in order to delegate these permissions in the AppCenter?


Options are :

  • Administrators
  • Applications
  • Servers
  • Policies

Answer :Administrators

Scenario: A server farm consists of dual- and single-processor servers. The administrator wants to ensure that the dual-processor servers receive more sessions than the single- processor servers. In addition, the administrator wants to ensure that no server receives more than 100 user sessions. In order to meet these requirements, the administrator must assign the __________.


Options are :

  • custom load evaluator rule to all servers
  • custom load evaluator rule to all dual-processor servers
  • advanced load evaluator rule to all dual-processor servers
  • advanced load evaluator rule to all servers

Answer :custom load evaluator rule to all servers

Which step(s) should an administrator take to publish applications that will be accessed through Web Interface and presented in different folders?


Options are :

  • In the application properties, in the Shortcut presentation section, fill in a name for the Client application folder.
  • In the application properties, in the location section, change the working directory to match the folder name.
  • Create a folder under the Application node and put the specific applications in the folder.
  • Publish the applications as Content instead of Applications.

Answer :In the application properties, in the Shortcut presentation section, fill in a name for the Client application folder.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 1

Scenario: A company is testing application streaming to allow workers to use their applications offline. The application being tested is Adobe Reader. The test is successful and now the administrators need to stream Microsoft Office 2010 also. Users must be able to read PDF files that are attached to emails opened in Microsoft Outlook 2010. Which action must the administrator take to meet the requirements of the scenario?


Options are :

  • When profiling, choose 'Advanced Install - Select files and folders' and copy the application executables from the two applications into each application profile.
  • Link the Adobe Reader streaming package to the Office 2010 streaming package during profiling of the Office 2010 package.
  • Publish the two applications with the same settings from the AppCenter.
  • Precache the two packages on the users' computers instead of streaming them at launch time.

Answer :Link the Adobe Reader streaming package to the Office 2010 streaming package during profiling of the Office 2010 package.

Scenario: A server farm has five servers which are members of the FARM worker group. Multiple applications are published on the servers for use by over 100 employees. One of the applications has only 10 licenses. What could the administrator do to allow only 10 employees to use that specific application at any given time?


Options are :

  • Assign a load evaluator to the published application.
  • Set the concurrent logon limit to 10.
  • Apply the connection access control policy using a filter.
  • Apply the limit user sessions policy using a filter.

Answer :Assign a load evaluator to the published application.

Scenario: An administrator needs to deliver an application to 1,500 user devices in the local network. The application will be delivered from a XenApp server farm consisting of 50 XenApp servers. When choosing how to deliver the application, the administrator must keep in mind that the user devices have little hard drive space and limited memory resources, the user devices will always be connected to the network and the application is updated often. Which setting should the administrator choose when publishing the application?


Options are :

  • Streamed to server
  • Installed application
  • Streamed if possible, otherwise accessed from a server
  • Streamed to client

Answer :Installed application

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 2

Scenario: An administrator has a server farm with five servers. The administrator wants to limit the number of Microsoft Excel published application sessions that can be run in the server farm. Which two steps could the administrator take to meet this requirement?


Options are :

  • Configure the Server User Load rule.
  • Configure the Load Throttling rule.
  • Configure the Application User Load rule.
  • Assign a load evaluator to the five servers.
  • Assign a load evaluator to the published application.

Answer :Configure the Application User Load rule. Assign a load evaluator to the published application.

An administrator of a XenApp 6.5 environment needs to determine which printer drivers are native to the operating system and which ones are provided by the vendor. Which two can the administrator use to find this information?


Options are :

  • PnPUtil.exe
  • Configuration Logging report
  • Print Detective
  • AppCenter

Answer :PnPUtil.exe Print Detective

Scenario: An administrator wants users in their two regions to utilize the XenApp servers in their own region to get the best performance from their applications but automatically fail over to the alternate region. The administrator creates an Active Directory group for each region. The administrator should create __________ and __________.


Options are :

  • one worker group; one load balancing policy
  • two worker groups; two load balancing policies
  • two worker groups; one load balancing policy
  • one worker group; two load balancing policies

Answer :two worker groups; two load balancing policies

1Y0-200 Managing Citrix XenDesktop 7 Solutions Exam Set 3

Scenario: A Citrix administrator manages a XenApp farm with hundreds of task workers. Management desires that user profiles be kept to a minimum size and stored in a centralized location. User changes must NOT be retained at logoff. Based on these requirements, which type of profile should the administrator implement?


Options are :

  • Roaming
  • Local
  • Mandatory
  • Citrix Profile Management

Answer :Mandatory

Scenario: A server farm consists of dual- and single-processor servers. The administrator of the farm wants to ensure that the dual-processor servers receive more sessions than the single-processor servers. In order to distribute the session load equitably among both types of servers, the administrator must assign the __________.


Options are :

  • advanced load evaluator rule to all servers
  • default load evaluator rule to all dual-processor servers
  • default load evaluator rule to all servers
  • advanced load evaluator rule to all dual-processor servers

Answer :advanced load evaluator rule to all servers

An administrator wants to configure configuration logging for two XenApp farms. Which two tasks must the administrator configure to accomplish this?


Options are :

  • Enable configuration logging for each farm and connect to a single database.
  • Enable configuration logging for each farm and connect to two separate databases.
  • Configure separate MS SQL databases for each XenApp farm.
  • Configure one MS SQL database for both XenApp farms to connect to.

Answer :Enable configuration logging for each farm and connect to two separate databases. Configure separate MS SQL databases for each XenApp farm.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 1

Scenario: An administrator has published Microsoft Word on two identical servers in a server farm. There are 75 users in the environment, and each server must be allowed to accept all 75 user sessions for failover purposes. All users start work at 09:00 in the morning. The administrator wants to prevent server failure due to excessive connection attempts during this logon time. Which option will meet the needs of this scenario?


Options are :

  • Advanced load evaluator
  • Load balancing policy
  • Default load evaluator
  • Server session policy

Answer :Default load evaluator

Scenario: A Citrix administrator is migrating the servers in his farm from XenApp 5 on Windows Server 2003 with HRP3 to XenApp 6.5 for Windows Server 2008 R2. In the XenApp farm, a Zone Preference and Failover policy was used. Which policy should the administrator use to replace the Zone Preference and Failover policy?


Options are :

  • Load Balancing
  • Citrix User
  • Load Evaluator
  • Citrix Computer

Answer :Load Balancing

A XenApp administrator discovers that a XenApp server which was previously deleted from the AppCenter is still listed in the console. Which command can the administrator run to force removal of the erroneous server record?


Options are :

  • dsmaint recover
  • dscheck /clean
  • dscheck
  • dsmaint recreatelhc

Answer :dscheck /clean

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 2

Scenario: An administrator receives word that the IT Manager wants the Domain Admin group to have rights within the XenApp farm to help support the infrastructure. The administrator agrees but wants to restrict them from publishing applications. In which two ways could the administrator set these permissions?


Options are :

  • Create a Custom Administrators group in Active Directory, map that to a Custom Administrator's role in the AppCenter and remove the Publish Application permission.
  • Add Each Domain Admin's Active Directory account to a Full Administrator's role in the AppCenter and remove the Publish Application Permission.
  • Map the Domain Admin's Active Directory group to a Full Administrator's role in the AppCenter and uncheck the entire Publish Application Permissions.
  • Map the Domain Admin's Active Directory group to a Custom Administrator's role in the AppCenter and remove the Publish Application Permission

Answer :Create a Custom Administrators group in Active Directory, map that to a Custom Administrator's role in the AppCenter and remove the Publish Application permission. Map the Domain Admin's Active Directory group to a Custom Administrator's role in the AppCenter and remove the Publish Application Permission

A Senior Administrator wants to give a Junior Administrator complete rights to a folder of applications while restricting some of his permissions to the overall farm. The Senior Administrator must grant _______.


Options are :

  • Read Only Permissions at the farm level and Full Permissions at the folder level
  • Custom Permissions at the farm level and folder level
  • Custom Permissions at the farm level, then Full Permissions within the application folder
  • Full Permissions at the farm level and then Custom Permissions within the application folder

Answer :Custom Permissions at the farm level, then Full Permissions within the application folder

Scenario: A server farm consists of servers with 8 GB and 16 GB of RAM. The administrator wants to ensure that the servers with 16 GB of RAM receive more sessions than the 8 GB servers. In order to distribute the session load equitably among both types of servers, the administrator could assign the __________.


Options are :

  • default load evaluator rule to all 16 GB servers
  • advanced load evaluator rule to all 16 GB servers
  • default load evaluator rule to all servers
  • advanced load evaluator rule to all servers

Answer :advanced load evaluator rule to all servers

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 3

Scenario: The User Support Desk will be taking on frontline troubleshooting of the Citrix farms in response to user issues. The administrator wants the Support Desk staff to do basic user troubleshooting without having production server farm permissions. All users are added to an appropriate Active Directory group. Which step must the administrator take in the AppCenter to meet the requirements of the scenario?


Options are :

  • Assign Custom permissions
  • Assign the users toRead-Only permissions
  • AssignFull Administration permissions
  • Assign a Custom Group Policy Object to the organizational unit of the group

Answer :Assign Custom permissions

Scenario: A XenApp farm consists of 10 XenApp servers divided into two worker groups with five servers in each. Worker Group 1 hosts applications for the Sales group and Worker Group 2 hosts applications for the Marketing group. A new application is introduced only to the Sales department. The application is installed on all servers. How should the administrator configure the Users tab so that only the Sales group has access?


Options are :

  • Publish the application only to the Sales group.
  • Publish the application to Worker Group 1.
  • Publish the application only to the Marketing group.
  • Publish the application to Worker Group 2.

Answer :Publish the application only to the Sales group.

A XenApp administrator does NOT have access to the AppCenter console at the moment and needs to be able to confirm which server in the farm is currently the zone data collector. Which command line utility would provide the information the administrator needs?


Options are :

  • dsmaint verifylhc
  • qfarm
  • dsmaint compare
  • qfarm /load

Answer :qfarm

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Exam Set 4

Which policy should an administrator configure so that if all servers in a worker group go offline, XenApp redirects user connections to a backup worker group?


Options are :

  • Citrix Computer
  • Citrix User
  • Load Balancing
  • Load Evaluator

Answer :Load Balancing

Scenario: For users at remote offices, network printers are defined on their workstations. A print server is located in each remote office. The WAN link speed to the datacenter varies and the administrator would like to ensure the best possible printing performance for these XenApp users. Which step should the administrator take to address this group of users with minimal required effort?


Options are :

  • Enable the session printers policy.
  • Reconfigure the network printers as local printers on the workstations.
  • Ensure that the vendor printer driver is installed on all XenApp servers in the farm.
  • Disable the direct connections to print servers policy.

Answer :Disable the direct connections to print servers policy.

Scenario: Users in an environment connect to the XenApp farm from Linux based thin clients. They report that they are NOT able to access the computer-based training course hosted on the XenApp server in the Microsoft Media Format (MMS). Windows-based users are NOT reporting this issue. What could the administrator do to resolve this issue?


Options are :

  • Disable host (server) to client redirection.
  • Require the Linux thin clients to use the Java client.
  • Create a XenApp policy to enable HDX Flash redirection for the Linux thin clients.
  • Ensure these thin clients have the latest Receiver client for Linux.

Answer :Disable host (server) to client redirection.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 1

Scenario: A Citrix administrator manages a mixed environment consisting of desktops, XenApp and XenDesktop. Management desires that: login times be decreased user profiles are stored in a centralized location user changes be saved user changes be made available to user sessions accessed from any desktop, XenApp server or XenDesktop connection Based on these requirements, which type of profile should the administrator implement?


Options are :

  • Local
  • Citrix Profile Management
  • Roaming
  • Mandatory

Answer :Citrix Profile Management

Users in an environment need to be able to open Microsoft Office documents using the software installed on the XenApp server even if the user has NOT started a Citrix session. What must the administrator configure to meet the requirements of the scenario?


Options are :

  • Host (server) to client redirection
  • File Type Association
  • Client to host (server) redirection
  • Offline streaming

Answer :Client to host (server) redirection

Scenario: An administrator has published Microsoft Excel on two identical servers and has placed those servers in a worker group. There are 150 users in the environment, and each server must be allowed to accept all 150 user sessions for failover purposes. All users start work at 09:00 in the morning. The administrator also wants to prevent the servers from failing due to excessive connection attempts during this logon time. What can the administrator do to ensure that the server farm can meet these requirements?


Options are :

  • Create a custom load evaluator and assign it to the worker group.
  • Create a load balancing policy and assign it to the worker group.
  • Assign the advanced load evaluator to the worker group.
  • Assign the default load evaluator to the worker group.

Answer :Create a custom load evaluator and assign it to the worker group.

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 2

Scenario: A server farm has 12 servers in the FARM worker group with more than 1,000 users and 20 published applications. Two of the published applications perform excessive CPU context switches. What can the administrator do to ensure that the resource-intensive applications will run optimally in the server farm?


Options are :

  • Apply the session importance policy to both resource-intensive applications.
  • Assign a load evaluator to the FARM worker group.
  • Apply the multi-Stream policy to both resource-intensive applications.
  • Assign a load evaluator to both resource-intensive applications.

Answer :Assign a load evaluator to both resource-intensive applications.

Scenario: A XenApp administrator must recommend a database option for a new XenApp 6.5 data store. The new farm will have multiple zones over WAN connections with low bandwidth and high latency. Which two database options should the administrator recommend?


Options are :

  • Microsoft SQL Server 2008 Express R2
  • Microsoft SQL Server 2008 Express
  • Microsoft SQL Server 2008 R2
  • Microsoft SQL Server 2008

Answer :Microsoft SQL Server 2008 R2 Microsoft SQL Server 2008

1Y0-200 Managing Citrix XenDesktop 7 Solutions Practice Test Set 3

Comment / Suggestion Section
Point our Mistakes and Post Your Suggestions